[PATCH] arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio

Anand Moon linux.amoon at gmail.com
Sun Sep 19 14:31:34 PDT 2021


As described in the Odroid-n2 & Odroid-n2-plus schematics,
the 5V regulator is controlled by GPIOH_8 and in Open Drain
since this GPIO doesn't support Push-Pull.

Cc: Neil Armstrong <narmstrong at baylibre.com>
Signed-off-by: Anand Moon <linux.amoon at gmail.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 4f33820aba1f..e8a00a2f8812 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -99,6 +99,8 @@ vcc_5v: regulator-vcc_5v {
 		regulator-max-microvolt = <5000000>;
 		regulator-always-on;
 		vin-supply = <&main_12v>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
 	};
 
 	vcc_1v8: regulator-vcc_1v8 {
-- 
2.33.0




More information about the linux-arm-kernel mailing list