[PATCH v3 02/17] clk: at91: pmc: execute suspend/resume only for backup mode
Claudiu Beznea
claudiu.beznea at microchip.com
Fri Sep 17 05:06:27 PDT 2021
Before going to backup mode architecture specific PM code sets the first
word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()).
Thus take this into account when suspending/resuming clocks. This will
avoid executing unnecessary instructions when suspending to non backup
modes. Also this commit changed the postcore_initcall() with
subsys_initcall() to be able to execute of_find_compatible_node() since
this was not available at the moment of postcore_initcall(). This should
not alter the tcb_clksrc since the changes are related to clocks
suspend/resume procedure that will be executed at the user space request,
thus long ago after subsys_initcall().
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
drivers/clk/at91/pmc.c | 49 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 47 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index b2806946a77a..58e9c088cb22 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -8,6 +8,8 @@
#include <linux/clkdev.h>
#include <linux/clk/at91_pmc.h>
#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -110,13 +112,35 @@ struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
}
#ifdef CONFIG_PM
+
+/* Address in SECURAM that say if we suspend to backup mode. */
+static void __iomem *at91_pmc_backup_suspend;
+
static int at91_pmc_suspend(void)
{
+ unsigned int backup;
+
+ if (!at91_pmc_backup_suspend)
+ return 0;
+
+ backup = *(unsigned int *)at91_pmc_backup_suspend;
+ if (!backup)
+ return 0;
+
return clk_save_context();
}
static void at91_pmc_resume(void)
{
+ unsigned int backup;
+
+ if (!at91_pmc_backup_suspend)
+ return;
+
+ backup = *(unsigned int *)at91_pmc_backup_suspend;
+ if (!backup)
+ return;
+
clk_restore_context();
}
@@ -132,6 +156,7 @@ static const struct of_device_id sama5d2_pmc_dt_ids[] = {
static int __init pmc_register_ops(void)
{
+ struct platform_device *pdev;
struct device_node *np;
np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids);
@@ -144,10 +169,30 @@ static int __init pmc_register_ops(void)
}
of_node_put(np);
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
+ if (!np)
+ return -ENODEV;
+
+ if (!of_device_is_available(np)) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ pdev = of_find_device_by_node(np);
+ of_node_put(np);
+ if (!pdev)
+ return -ENODEV;
+
+ at91_pmc_backup_suspend = of_iomap(np, 0);
+ if (!at91_pmc_backup_suspend) {
+ pr_warn("%s(): unable to map securam\n", __func__);
+ return -ENOMEM;
+ }
+
register_syscore_ops(&pmc_syscore_ops);
return 0;
}
-/* This has to happen before arch_initcall because of the tcb_clksrc driver */
-postcore_initcall(pmc_register_ops);
+
+subsys_initcall(pmc_register_ops);
#endif
--
2.25.1
More information about the linux-arm-kernel
mailing list