[PATCH] arm64: dts: ls1028a: fix eSDHC2 node

[Michael Walle]

On the LS1028A this instance of the eSDHC controller is intended for
either an eMMC or eSDIO card. It doesn't provide a card detect pin and
its IO voltage is fixed at 1.8V.

Remove the bogus broken-cd property, instead add the non-removable
property. Fix the voltage-ranges property and set it to 1.8V only.

Fixes: 491d3a3fc113 ("arm64: dts: ls1028a: Add esdhc node in dts")
Signed-off-by: Michael Walle <michael at walle.cc>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index ef771bfad11c..8cee1f79e5c0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -407,9 +407,9 @@ esdhc1: mmc at 2150000 {
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>; /* fixed up by bootloader */
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
-			voltage-ranges = <1800 1800 3300 3300>;
+			voltage-ranges = <1800 1800>;
 			sdhci,auto-cmd12;
-			broken-cd;
+			non-removable;
 			little-endian;
 			bus-width = <4>;
 			status = "disabled";
-- 
2.30.2