[PATCH v2] ARM: dts: imx6qdl-pico: Fix Ethernet support

[Fabio Estevam]

Hi Andrew,

On Tue, Sep 14, 2021 at 12:19 PM Andrew Lunn <andrew at lunn.ch> wrote:

> Do you know how fast this PHY reacts after a reset?
> arch/arm/boot/dts/imx6dl-riotboard.dts for example also has:

It is an AR8035.  According to the datasheet, a 1ms delay is
recommended after reset.

>
>                         reset-deassert-us = <1000>;

Yes, this looks correct.

For now, I have sent v3 that only passes qca,clk-out-frequency to
avoid the regression.

I will revisit the reset properties later.

Thanks