[PATCH] arm64: entry: Improve the performance of system calls
Leizhen (ThunderTown)
thunder.leizhen at huawei.com
Tue Sep 14 04:48:54 PDT 2021
On 2021/9/14 19:23, Leizhen (ThunderTown) wrote:
>
>
> On 2021/9/14 17:55, Mark Rutland wrote:
>> Hi,
>>
>> On Fri, Sep 03, 2021 at 08:19:50PM +0800, Zhen Lei wrote:
>>> Commit 582f95835a8f ("arm64: entry: convert el0_sync to C") converted lots
>>> of functions from assembly to C, this greatly improves readability. But
>>> el0_svc()/el0_svc_compat() is in response to system call requests from
>>> user mode and may be in the hot path.
>>>
>>> Although the SVC is in the first case of the switch statement in C, the
>>> compiler optimizes the switch statement as a whole, and does not give SVC
>>> a small boost.
>>>
>>> Use "likely()" to help SVC directly invoke its handler after a simple
>>> judgment to avoid entering the switch table lookup process.
>>>
>>> After:
>>> 0000000000000ff0 <el0t_64_sync_handler>:
>>> ff0: d503245f bti c
>>> ff4: d503233f paciasp
>>> ff8: a9bf7bfd stp x29, x30, [sp, #-16]!
>>> ffc: 910003fd mov x29, sp
>>> 1000: d5385201 mrs x1, esr_el1
>>> 1004: 531a7c22 lsr w2, w1, #26
>>> 1008: f100545f cmp x2, #0x15
>>> 100c: 540000a1 b.ne 1020 <el0t_64_sync_handler+0x30>
>>> 1010: 97fffe14 bl 860 <el0_svc>
>>> 1014: a8c17bfd ldp x29, x30, [sp], #16
>>> 1018: d50323bf autiasp
>>> 101c: d65f03c0 ret
>>> 1020: f100705f cmp x2, #0x1c
>>
>> It would be helpful if you could state which toolchain and config was
>> used to generate the above.
>
> gcc version 7.3.0 (GCC), make defconfig
>
>>
>> For comparison, what was the code generation like before? I assume
>> el0_svc wasn't the target of the first test and branch? Assuming so, how
>> many tests and branches were there before the call to el0_svc()?
>
Sorry, the old assembly code was not compiled with the latest mainline.
But the key point is no different.
0000000000000fe0 <el0t_64_sync_handler>:
fe0: d503233f paciasp
fe4: a9bf7bfd stp x29, x30, [sp, #-16]!
fe8: 910003fd mov x29, sp
fec: d5385201 mrs x1, esr_el1
ff0: 531a7c22 lsr w2, w1, #26
ff4: f100f05f cmp x2, #0x3c
ff8: 54000068 b.hi 1004 <el0t_64_sync_handler+0x24> // b.pmore
ffc: 7100f05f cmp w2, #0x3c
1000: 540000c9 b.ls 1018 <el0t_64_sync_handler+0x38> // b.plast
1004: 97fffce9 bl 3a8 <el0_inv>
1008: a8c17bfd ldp x29, x30, [sp], #16
100c: d50323bf autiasp
1010: d65f03c0 ret
1014: d503201f nop
1018: 90000003 adrp x3, 0 <el0_da>
101c: 91000063 add x3, x3, #0x0
1020: 38624862 ldrb w2, [x3, w2, uxtw]
1024: 10000063 adr x3, 1030 <el0t_64_sync_handler+0x50>
1028: 8b228862 add x2, x3, w2, sxtb #2
102c: d61f0040 br x2
1030: 97fffc3a bl 118 <el0_dbg>
1034: 17fffff5 b 1008 <el0t_64_sync_handler+0x28>
1038: 97fffc96 bl 290 <el0_fpsimd_exc>
103c: 17fffff3 b 1008 <el0t_64_sync_handler+0x28>
1040: 97fffc08 bl 60 <el0_sp>
1044: 17fffff1 b 1008 <el0t_64_sync_handler+0x28>
1048: 97fffbee bl 0 <el0_da>
104c: 17ffffef b 1008 <el0t_64_sync_handler+0x28>
1050: 97fffeea bl bf8 <el0_pc>
1054: 17ffffed b 1008 <el0t_64_sync_handler+0x28>
1058: 97fffeb2 bl b20 <el0_ia>
105c: 17ffffeb b 1008 <el0t_64_sync_handler+0x28>
1060: 97fffc46 bl 178 <el0_fpac>
1064: 17ffffe9 b 1008 <el0t_64_sync_handler+0x28>
1068: 97fffc72 bl 230 <el0_sve_acc>
106c: 17ffffe7 b 1008 <el0t_64_sync_handler+0x28>
1070: 97ffff18 bl cd0 <el0_svc>
1074: 17ffffe5 b 1008 <el0t_64_sync_handler+0x28>
1078: 97fffcb6 bl 350 <el0_bti>
107c: 17ffffe3 b 1008 <el0t_64_sync_handler+0x28>
1080: 97fffc54 bl 1d0 <el0_fpsimd_acc>
1084: 17ffffe1 b 1008 <el0t_64_sync_handler+0x28>
1088: 97fffc9a bl 2f0 <el0_sys>
108c: 17ffffdf b 1008 <el0t_64_sync_handler+0x28>
1090: 97fffc0c bl c0 <el0_undef>
1094: 17ffffdd b 1008 <el0t_64_sync_handler+0x28>
>
>
>>
>> At a high-level, I'm not too keen on special-casing things unless
>> necessary.
>>
>> I wonder if we could get similar results without special-casing by using
>> a static const array of handlers indexed by the EC, since (with GCC
>> 11.1.0 from the kernel.org crosstool page) that can result in code like:
>>
>> 0000000000001010 <el0t_64_sync_handler>:
>> 1010: d503245f bti c
>> 1014: d503233f paciasp
>> 1018: a9bf7bfd stp x29, x30, [sp, #-16]!
>> 101c: 910003fd mov x29, sp
>> 1020: d5385201 mrs x1, esr_el1
>> 1024: 90000002 adrp x2, 0 <el0t_64_sync_handlers>
>> 1028: 531a7c23 lsr w3, w1, #26
>> 102c: 91000042 add x2, x2, #:lo12:<el0t_64_sync_handlers>
>> 1030: f8637842 ldr x2, [x2, x3, lsl #3]
>> 1034: d63f0040 blr x2
>> 1038: a8c17bfd ldp x29, x30, [sp], #16
>> 103c: d50323bf autiasp
>> 1040: d65f03c0 ret
>>
>> ... which might do better by virtue of reducing a chain of potential
>> mispredicts down to a single potential mispredict, and dynamic branch
>> prediction hopefully does a good job of predicting the common case at
>> runtime. That said, the resulting tables will be pretty big...
>
>
> a48: 38624862 ldrb w2, [x3, w2, uxtw]
> a4c: 10000063 adr x3, a58 <el0_sync_handler+0x48>
> a50: 8b228862 add x2, x3, w2, sxtb #2
> a54: d61f0040 br x2
>
> The original implementation also generated a query table, but yours is
> more concise. I will try to test it. Looks like a better solution.
>
>>
>>>
>>> Execute "./lat_syscall null" on my board (BogoMIPS : 200.00), it can save
>>> about 10ns.
>>>
>>> Before:
>>> Simple syscall: 0.2365 microseconds
>>> Simple syscall: 0.2354 microseconds
>>> Simple syscall: 0.2339 microseconds
>>>
>>> After:
>>> Simple syscall: 0.2255 microseconds
>>> Simple syscall: 0.2254 microseconds
>>> Simple syscall: 0.2256 microseconds
>>
>> I appreciate this can be seen by a microbenchmark, but does this have an
>> impact on a real workload? I'd imagine that real syscall usage will
>> dominate this in practice, and this would fall into the noise.
>
> The product side has a test plan, but the progress will be slow.
>
>>
>> Thanks,
>> Mark.
>>
>>> Signed-off-by: Zhen Lei <thunder.leizhen at huawei.com>
>>> ---
>>> arch/arm64/kernel/entry-common.c | 18 ++++++++++++------
>>> 1 file changed, 12 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
>>> index 32f9796c4ffe77b..062eb5a895ec6f3 100644
>>> --- a/arch/arm64/kernel/entry-common.c
>>> +++ b/arch/arm64/kernel/entry-common.c
>>> @@ -607,11 +607,14 @@ static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr)
>>> asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs)
>>> {
>>> unsigned long esr = read_sysreg(esr_el1);
>>> + unsigned long ec = ESR_ELx_EC(esr);
>>>
>>> - switch (ESR_ELx_EC(esr)) {
>>> - case ESR_ELx_EC_SVC64:
>>> + if (likely(ec == ESR_ELx_EC_SVC64)) {
>>> el0_svc(regs);
>>> - break;
>>> + return;
>>> + }
>>> +
>>> + switch (ec) {
>>> case ESR_ELx_EC_DABT_LOW:
>>> el0_da(regs, esr);
>>> break;
>>> @@ -730,11 +733,14 @@ static void noinstr el0_svc_compat(struct pt_regs *regs)
>>> asmlinkage void noinstr el0t_32_sync_handler(struct pt_regs *regs)
>>> {
>>> unsigned long esr = read_sysreg(esr_el1);
>>> + unsigned long ec = ESR_ELx_EC(esr);
>>>
>>> - switch (ESR_ELx_EC(esr)) {
>>> - case ESR_ELx_EC_SVC32:
>>> + if (likely(ec == ESR_ELx_EC_SVC32)) {
>>> el0_svc_compat(regs);
>>> - break;
>>> + return;
>>> + }
>>> +
>>> + switch (ec) {
>>> case ESR_ELx_EC_DABT_LOW:
>>> el0_da(regs, esr);
>>> break;
>>> --
>>> 2.25.1
>>>
>> .
>>
More information about the linux-arm-kernel
mailing list