[PATCH 3/4] dmaengine: zynqmp_dma: Add conditions for return value check

[Harini Katakam]

From: Shravya Kumbham <shravya.kumbham at xilinx.com>

Add condition to check the return value of dma_async_device_register
and pm_runtime_get_sync functions.

Addresses-Coverity: Event check_return.
Signed-off-by: Shravya Kumbham <shravya.kumbham at xilinx.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey at xilinx.com>
---
 drivers/dma/xilinx/zynqmp_dma.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index d28b9ffb4309..588460e56ab8 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -1080,7 +1080,11 @@ static int zynqmp_dma_probe(struct platform_device *pdev)
 	pm_runtime_set_autosuspend_delay(zdev->dev, ZDMA_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(zdev->dev);
 	pm_runtime_enable(zdev->dev);
-	pm_runtime_get_sync(zdev->dev);
+	ret = pm_runtime_get_sync(zdev->dev);
+	if (ret < 0) {
+		dev_err(zdev->dev, "pm_runtime_get_sync() failed\n");
+		pm_runtime_disable(zdev->dev);
+	}
 	if (!pm_runtime_enabled(zdev->dev)) {
 		ret = zynqmp_dma_runtime_resume(zdev->dev);
 		if (ret)
@@ -1096,7 +1100,11 @@ static int zynqmp_dma_probe(struct platform_device *pdev)
 	p->dst_addr_widths = BIT(zdev->chan->bus_width / 8);
 	p->src_addr_widths = BIT(zdev->chan->bus_width / 8);
 
-	dma_async_device_register(&zdev->common);
+	ret = dma_async_device_register(&zdev->common);
+	if (ret) {
+		dev_err(zdev->dev, "failed to register the dma device\n");
+		goto free_chan_resources;
+	}
 
 	ret = of_dma_controller_register(pdev->dev.of_node,
 					 of_zynqmp_dma_xlate, zdev);
-- 
2.17.1