[RFC 17/19] net: ethernet: fec_main: Add interconnect support

[Abel Vesa]

On probe, if the dts node contains a valid icc path, then look for the
fsl,icc-rate property and get the rate. Also set the icc bandwidth
for that path to the nominal rate needed for fec to function right.
Then enable and disable the path every time the fec is used or not.
This will result in reducing the clock speeds along the icc path
for each pl301 and NoC, but still meet the requirements for all the
other icc consumers.

Signed-off-by: Abel Vesa <abel.vesa at nxp.com>
---
 drivers/net/ethernet/freescale/fec.h      |  3 +++
 drivers/net/ethernet/freescale/fec_main.c | 19 +++++++++++++++++++
 2 files changed, 22 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index 7b4961daa254..2c5784febbeb 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -558,6 +558,9 @@ struct fec_enet_private {
 	unsigned int num_tx_queues;
 	unsigned int num_rx_queues;
 
+	struct icc_path *bus_path;
+	unsigned int bus_rate;
+
 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
 	struct fec_enet_priv_tx_q *tx_queue[FEC_ENET_MAX_TX_QS];
 	struct fec_enet_priv_rx_q *rx_queue[FEC_ENET_MAX_RX_QS];
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 80bd5c629fa0..67374d436e73 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -48,6 +48,7 @@
 #include <linux/bitops.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/interconnect.h>
 #include <linux/clk.h>
 #include <linux/crc32.h>
 #include <linux/platform_device.h>
@@ -3805,6 +3806,18 @@ fec_probe(struct platform_device *pdev)
 	fep->pdev = pdev;
 	fep->dev_id = dev_id++;
 
+	fep->bus_path = devm_of_icc_get(&pdev->dev, "path");
+	if (IS_ERR(fep->bus_path)) {
+		return PTR_ERR(fep->bus_path);
+	} else if (fep->bus_path) {
+		if (of_property_read_u32(np, "fsl,icc-rate", &fep->bus_rate)) {
+			dev_err(&pdev->dev, "icc-rate missing\n");
+			return -EINVAL;
+		}
+
+		icc_set_bw(fep->bus_path, 0, fep->bus_rate);
+	}
+
 	platform_set_drvdata(pdev, ndev);
 
 	if ((of_machine_is_compatible("fsl,imx6q") ||
@@ -4075,6 +4088,8 @@ static int __maybe_unused fec_suspend(struct device *dev)
 	if (fep->clk_enet_out || fep->reg_phy)
 		fep->link = 0;
 
+	icc_disable(fep->bus_path);
+
 	return 0;
 }
 
@@ -4085,6 +4100,8 @@ static int __maybe_unused fec_resume(struct device *dev)
 	int ret;
 	int val;
 
+	icc_enable(fep->bus_path);
+
 	if (fep->reg_phy && !(fep->wol_flag & FEC_WOL_FLAG_ENABLE)) {
 		ret = regulator_enable(fep->reg_phy);
 		if (ret)
@@ -4134,6 +4151,7 @@ static int __maybe_unused fec_runtime_suspend(struct device *dev)
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
 
+	icc_disable(fep->bus_path);
 	return 0;
 }
 
@@ -4143,6 +4161,7 @@ static int __maybe_unused fec_runtime_resume(struct device *dev)
 	struct fec_enet_private *fep = netdev_priv(ndev);
 	int ret;
 
+	icc_enable(fep->bus_path);
 	ret = clk_prepare_enable(fep->clk_ahb);
 	if (ret)
 		return ret;
-- 
2.31.1