[PATCH 2/2] USB: host: ehci-atmel: Add support for HSIC phy

[Alexander Dahl]

Hello Christian,

Am Freitag, 10. September 2021, 18:38:42 CEST schrieb 
cristian.birsan at microchip.com:
> From: Cristian Birsan <cristian.birsan at microchip.com>
> 
> Add support for USB Host High Speed Port HSIC phy.
> 
> Signed-off-by: Cristian Birsan <cristian.birsan at microchip.com>
> ---
>  drivers/usb/host/ehci-atmel.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
> index e893467d659c..05d41fd65f25 100644
> --- a/drivers/usb/host/ehci-atmel.c
> +++ b/drivers/usb/host/ehci-atmel.c
> @@ -18,6 +18,8 @@
>  #include <linux/platform_device.h>
>  #include <linux/usb.h>
>  #include <linux/usb/hcd.h>
> +#include <linux/usb/phy.h>
> +#include <linux/usb/of.h>
> 
>  #include "ehci.h"
> 
> @@ -25,6 +27,9 @@
> 
>  static const char hcd_name[] = "ehci-atmel";
> 
> +#define EHCI_INSNREG(index)			((index) * 4 + 0x90)
> +#define EHCI_INSNREG08_HSIC_EN			BIT(2)
> +
>  /* interface and function clocks */
>  #define hcd_to_atmel_ehci_priv(h) \
>  	((struct atmel_ehci_priv *)hcd_to_ehci(h)->priv)
> @@ -154,6 +159,9 @@ static int ehci_atmel_drv_probe(struct platform_device
> *pdev) goto fail_add_hcd;
>  	device_wakeup_enable(hcd->self.controller);
> 
> +	if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_HSIC)
> +		writel(EHCI_INSNREG08_HSIC_EN, hcd->regs + EHCI_INSNREG(8));
> +
>  	return retval;
> 
>  fail_add_hcd:

Tested-by: Alexander Dahl <ada at thorsis.com>

Greets
Alex