[PATCH v2 3/3] firmware: xilinx: Add sysfs support for feature config
Ronak Jain
ronak.jain at xilinx.com
Mon Sep 13 01:39:55 PDT 2021
Add support for sysfs interface for runtime features configuration.
The user can configure the features at runtime. First the user need
to select the config id of the supported features and then the user
can configure the parameters of the feature based on the config id.
So far the support is added for the over temperature and external
watchdog features.
Signed-off-by: Ronak Jain <ronak.jain at xilinx.com>
---
Changes in v2:
- Update commit message
---
drivers/firmware/xilinx/zynqmp.c | 71 ++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 875d13bc1a57..a1434dd368f2 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -1361,6 +1361,75 @@ static DEVICE_ATTR_RW(pggs1);
static DEVICE_ATTR_RW(pggs2);
static DEVICE_ATTR_RW(pggs3);
+static atomic_t feature_conf_id;
+
+static ssize_t feature_config_id_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sysfs_emit(buf, "%d\n", atomic_read(&feature_conf_id));
+}
+
+static ssize_t feature_config_id_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 config_id;
+ int ret;
+
+ if (!buf)
+ return -EINVAL;
+
+ ret = kstrtou32(buf, 10, &config_id);
+ if (ret)
+ return ret;
+
+ atomic_set(&feature_conf_id, config_id);
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(feature_config_id);
+
+static ssize_t feature_config_value_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+
+ ret = zynqmp_pm_get_feature_config(atomic_read(&feature_conf_id),
+ ret_payload);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "%d\n", ret_payload[1]);
+}
+
+static ssize_t feature_config_value_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 value;
+ int ret;
+
+ if (!buf)
+ return -EINVAL;
+
+ ret = kstrtou32(buf, 10, &value);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_set_feature_config(atomic_read(&feature_conf_id),
+ value);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(feature_config_value);
+
static struct attribute *zynqmp_firmware_attrs[] = {
&dev_attr_ggs0.attr,
&dev_attr_ggs1.attr,
@@ -1372,6 +1441,8 @@ static struct attribute *zynqmp_firmware_attrs[] = {
&dev_attr_pggs3.attr,
&dev_attr_shutdown_scope.attr,
&dev_attr_health_status.attr,
+ &dev_attr_feature_config_id.attr,
+ &dev_attr_feature_config_value.attr,
NULL,
};
--
2.32.0.93.g670b81a
More information about the linux-arm-kernel
mailing list