[PATCH v2 07/17] irqchip/gic: Atomically update affinity

Magnus Damm magnus.damm at gmail.com
Fri Sep 10 19:49:20 PDT 2021


Hi Geert, Mark, RMK, everyone,

Thanks for your efforts. Let me just chime in with a few details and a question.

On Fri, Sep 10, 2021 at 10:19 PM Geert Uytterhoeven
<geert at linux-m68k.org> wrote:
> On Fri, Sep 10, 2021 at 12:23 PM Marc Zyngier <maz at kernel.org> wrote:
> > On Thu, 09 Sep 2021 16:22:01 +0100,
> > Geert Uytterhoeven <geert at linux-m68k.org> wrote:
>     GIC: enabling workaround for broken byte access

Indeed, byte access is unsupported according to the EMEV2 documentation.

The EMEV2 documentation R19UH0036EJ0600 Chapter 7 Interrupt Control on
page 97 says:
"Interrupt registers can be accessed via the APB bus, in 32-bit units"
"For details about register functions, see ARM Generic Interrupt
Controller Architecture Specification Architecture version 1.0"
The file  "R19UH0036EJ0600_1Chip.pdf" is the 6th edition version
published in 2010 and is not marked as confidential.

>From my basic research, "ARM Generic Interrupt Controller Architecture
Specification Architecture version 1.0" is documented in ARM IHI 0048A
from 2008 (Non-Confidential) which contains:
"All GIC registers are 32-bit wide." and "All registers support 32-bit
word access..."
"In addition, the following registers support byte accesses:"
"ICDIPR"
"ICDIPTR"

So the GICv1 documentation says byte access is partially supported
however EMEV2 documentation says 32-bit access is required.

> > +               .compatible     = "arm,pl390",
> > +               .init           = gic_enable_rmw_access,
> > +       },

May I ask about a clarification about the EMEV2 DTS and DT binding
documentation in:
arch/arm/boot/dts/emev2.dts
Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml

On EMEV2 the DT compatible string currently seems to be the rather
generic "arm,pl390". In the DT binding documentation GICv1 is listed
in an example as "arm,cortex-a9-gic". Is there any reason for not
using the GICv1 compatible string (and 32-bit access) for EMEV2? Just
curious.

Cheers,

/ magnus



More information about the linux-arm-kernel mailing list