[PATCH v4 15/18] arm64: dts: imx8mm: put USB controllers into power-domains

[Lucas Stach]

Now that we have support for the power domain controller on the i.MX8MM
we can put the USB controllers in their respective power domains to allow
them to power down the PHY when possible.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 3922f26f8fd4..772f60bfe31e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1077,6 +1077,7 @@ usbotg1: usb at 32e40000 {
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_otg1>;
 				status = "disabled";
 			};
 
@@ -1096,6 +1097,7 @@ usbotg2: usb at 32e50000 {
 				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
 				fsl,usbphy = <&usbphynop2>;
 				fsl,usbmisc = <&usbmisc2 0>;
+				power-domains = <&pgc_otg2>;
 				status = "disabled";
 			};
 
-- 
2.30.2