[PATCH 1/2] ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Fri Sep 10 09:47:51 PDT 2021
> +static int mt8195_rt5682_etdm_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> + unsigned int rate = params_rate(params);
> + unsigned int mclk_fs_ratio = 128;
> + unsigned int mclk_fs = rate * mclk_fs_ratio;
> + int bitwidth;
> + int ret;
> +
> + bitwidth = snd_pcm_format_width(params_format(params));
> + if (bitwidth < 0) {
> + dev_err(card->dev, "invalid bit width: %d\n", bitwidth);
> + return bitwidth;
> + }
> +
> + ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x00, 0x0, 0x2, bitwidth);
> + if (ret) {
> + dev_err(card->dev, "failed to set tdm slot\n");
> + return ret;
> + }
> +
> + ret = snd_soc_dai_set_pll(codec_dai, RT5682_PLL1,
> + RT5682_PLL1_S_BCLK1,
> + params_rate(params) * 64,
> + params_rate(params) * 512);
> + if (ret) {
> + dev_err(card->dev, "failed to set pll\n");
> + return ret;
> + }
> +
> + ret = snd_soc_dai_set_sysclk(codec_dai,
> + RT5682_SCLK_S_PLL1,
> + params_rate(params) * 512,
> + SND_SOC_CLOCK_IN);
> + if (ret) {
> + dev_err(card->dev, "failed to set sysclk\n");
> + return ret;
> + }
> +
> + return snd_soc_dai_set_sysclk(cpu_dai, 0, mclk_fs, SND_SOC_CLOCK_OUT);
If you are using params_rate(params) x factor, then it'd be more
consistent to use:
return snd_soc_dai_set_sysclk(cpu_dai, 0, params_rate(params) * 128,
SND_SOC_CLOCK_OUT);
> +static int mt8195_mt6359_mtkaif_calibration(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct snd_soc_component *cmpnt_afe =
> + snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
> + struct snd_soc_component *cmpnt_codec =
> + asoc_rtd_to_codec(rtd, 0)->component;
> + struct mtk_base_afe *afe = snd_soc_component_get_drvdata(cmpnt_afe);
> + struct mt8195_afe_private *afe_priv = afe->platform_priv;
> + struct mtkaif_param *param = &afe_priv->mtkaif_params;
> + int phase;
> + unsigned int monitor;
> + int mtkaif_calibration_num_phase;
> + int test_done_1, test_done_2, test_done_3;
> + int cycle_1, cycle_2, cycle_3;
> + int prev_cycle_1, prev_cycle_2, prev_cycle_3;
> + int chosen_phase_1, chosen_phase_2, chosen_phase_3;
> + int counter;
> + bool mtkaif_calibration_ok;
> + int mtkaif_chosen_phase[MT8195_MTKAIF_MISO_NUM];
> + int mtkaif_phase_cycle[MT8195_MTKAIF_MISO_NUM];
> + int i;
reverse x-mas style with longer declarations first?
> +
> + dev_info(afe->dev, "%s(), start\n", __func__);
dev_dbg
> +
> + param->mtkaif_calibration_ok = false;
> + for (i = 0; i < MT8195_MTKAIF_MISO_NUM; i++) {
> + param->mtkaif_chosen_phase[i] = -1;
> + param->mtkaif_phase_cycle[i] = 0;
> + mtkaif_chosen_phase[i] = -1;
> + mtkaif_phase_cycle[i] = 0;
> + }
> +
> + if (IS_ERR(afe_priv->topckgen)) {
> + dev_info(afe->dev, "%s() Cannot find topckgen controller\n",
> + __func__);
> + return 0;
is this not an error? Why not dev_err() and return -EINVAL or something?
> + }
> +
> + pm_runtime_get_sync(afe->dev);
test if this worked?
> + mt6359_mtkaif_calibration_enable(cmpnt_codec);
> +
> + /* set test type to synchronizer pulse */
> + regmap_update_bits(afe_priv->topckgen,
> + CKSYS_AUD_TOP_CFG, 0xffff, 0x4);
> + mtkaif_calibration_num_phase = 42; /* mt6359: 0 ~ 42 */
> + mtkaif_calibration_ok = true;
> +
> + for (phase = 0;
> + phase <= mtkaif_calibration_num_phase && mtkaif_calibration_ok;
> + phase++) {
> + mt6359_set_mtkaif_calibration_phase(cmpnt_codec,
> + phase, phase, phase);
> +
> + regmap_update_bits(afe_priv->topckgen,
> + CKSYS_AUD_TOP_CFG, 0x1, 0x1);
> +
> + test_done_1 = 0;
> + test_done_2 = 0;
> + test_done_3 = 0;
> + cycle_1 = -1;
> + cycle_2 = -1;
> + cycle_3 = -1;
> + counter = 0;
> + while (!(test_done_1 & test_done_2 & test_done_3)) {
> + regmap_read(afe_priv->topckgen,
> + CKSYS_AUD_TOP_MON, &monitor);
> + test_done_1 = (monitor >> 28) & 0x1;
> + test_done_2 = (monitor >> 29) & 0x1;
> + test_done_3 = (monitor >> 30) & 0x1;
> + if (test_done_1 == 1)
> + cycle_1 = monitor & 0xf;
> +
> + if (test_done_2 == 1)
> + cycle_2 = (monitor >> 4) & 0xf;
> +
> + if (test_done_3 == 1)
> + cycle_3 = (monitor >> 8) & 0xf;
> +
> + /* handle if never test done */
> + if (++counter > 10000) {
> + dev_info(afe->dev, "%s(), test fail, cycle_1 %d, cycle_2 %d, cycle_3 %d, monitor 0x%x\n",
> + __func__,
> + cycle_1, cycle_2, cycle_3, monitor);
> + mtkaif_calibration_ok = false;
> + break;
> + }
> + }
> +
> + if (phase == 0) {
> + prev_cycle_1 = cycle_1;
> + prev_cycle_2 = cycle_2;
> + prev_cycle_3 = cycle_3;
> + }
> +
> + if (cycle_1 != prev_cycle_1 &&
> + mtkaif_chosen_phase[MT8195_MTKAIF_MISO_0] < 0) {
> + mtkaif_chosen_phase[MT8195_MTKAIF_MISO_0] = phase - 1;
> + mtkaif_phase_cycle[MT8195_MTKAIF_MISO_0] = prev_cycle_1;
> + }
> +
> + if (cycle_2 != prev_cycle_2 &&
> + mtkaif_chosen_phase[MT8195_MTKAIF_MISO_1] < 0) {
> + mtkaif_chosen_phase[MT8195_MTKAIF_MISO_1] = phase - 1;
> + mtkaif_phase_cycle[MT8195_MTKAIF_MISO_1] = prev_cycle_2;
> + }
> +
> + if (cycle_3 != prev_cycle_3 &&
> + mtkaif_chosen_phase[MT8195_MTKAIF_MISO_2] < 0) {
> + mtkaif_chosen_phase[MT8195_MTKAIF_MISO_2] = phase - 1;
> + mtkaif_phase_cycle[MT8195_MTKAIF_MISO_2] = prev_cycle_3;
> + }
> +
> + regmap_update_bits(afe_priv->topckgen,
> + CKSYS_AUD_TOP_CFG, 0x1, 0x0);
> +
> + if (mtkaif_chosen_phase[MT8195_MTKAIF_MISO_0] >= 0 &&
> + mtkaif_chosen_phase[MT8195_MTKAIF_MISO_1] >= 0 &&
> + mtkaif_chosen_phase[MT8195_MTKAIF_MISO_2] >= 0)
> + break;
> + }
> +
> + if (mtkaif_chosen_phase[MT8195_MTKAIF_MISO_0] < 0) {
> + mtkaif_calibration_ok = false;
> + chosen_phase_1 = 0;
> + } else {
> + chosen_phase_1 = mtkaif_chosen_phase[MT8195_MTKAIF_MISO_0];
> + }
> +
> + if (mtkaif_chosen_phase[MT8195_MTKAIF_MISO_1] < 0) {
> + mtkaif_calibration_ok = false;
> + chosen_phase_2 = 0;
> + } else {
> + chosen_phase_2 = mtkaif_chosen_phase[MT8195_MTKAIF_MISO_1];
> + }
> +
> + if (mtkaif_chosen_phase[MT8195_MTKAIF_MISO_2] < 0) {
> + mtkaif_calibration_ok = false;
> + chosen_phase_3 = 0;
> + } else {
> + chosen_phase_3 = mtkaif_chosen_phase[MT8195_MTKAIF_MISO_2];
> + }
> +
> + mt6359_set_mtkaif_calibration_phase(cmpnt_codec,
> + chosen_phase_1,
> + chosen_phase_2,
> + chosen_phase_3);
> +
> + mt6359_mtkaif_calibration_disable(cmpnt_codec);
> + pm_runtime_put(afe->dev);
> +
> + param->mtkaif_calibration_ok = mtkaif_calibration_ok;
> + param->mtkaif_chosen_phase[MT8195_MTKAIF_MISO_0] = chosen_phase_1;
> + param->mtkaif_chosen_phase[MT8195_MTKAIF_MISO_1] = chosen_phase_2;
> + param->mtkaif_chosen_phase[MT8195_MTKAIF_MISO_2] = chosen_phase_3;
> + for (i = 0; i < MT8195_MTKAIF_MISO_NUM; i++)
> + param->mtkaif_phase_cycle[i] = mtkaif_phase_cycle[i];
> +
> + dev_info(afe->dev, "%s(), end, calibration ok %d\n",
> + __func__, param->mtkaif_calibration_ok);
dev_dbg?
> +
> + return 0;
> +}
> +
> +static int mt8195_hdmitx_dptx_startup(struct snd_pcm_substream *substream)
> +{
> + static const unsigned int rates[] = {
> + 48000
> + };
> + static const unsigned int channels[] = {
> + 2, 4, 6, 8
> + };
> + static const struct snd_pcm_hw_constraint_list constraints_rates = {
> + .count = ARRAY_SIZE(rates),
> + .list = rates,
> + .mask = 0,
> + };
> + static const struct snd_pcm_hw_constraint_list constraints_channels = {
> + .count = ARRAY_SIZE(channels),
> + .list = channels,
> + .mask = 0,
> + };
you use the same const tables several times, move to a higher scope and
reuse?
> + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
> + struct snd_pcm_runtime *runtime = substream->runtime;
> + int ret;
> +
> + ret = snd_pcm_hw_constraint_list(runtime, 0,
> + SNDRV_PCM_HW_PARAM_RATE,
> + &constraints_rates);
> + if (ret < 0) {
> + dev_err(rtd->dev, "hw_constraint_list rate failed\n");
> + return ret;
> + }
> +
> + ret = snd_pcm_hw_constraint_list(runtime, 0,
> + SNDRV_PCM_HW_PARAM_CHANNELS,
> + &constraints_channels);
> + if (ret < 0) {
> + dev_err(rtd->dev, "hw_constraint_list channel failed\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct snd_soc_ops mt8195_hdmitx_dptx_playback_ops = {
> + .startup = mt8195_hdmitx_dptx_startup,
> +};
> +
> +static int mt8195_dptx_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> + unsigned int rate = params_rate(params);
> + unsigned int mclk_fs_ratio = 256;
> + unsigned int mclk_fs = rate * mclk_fs_ratio;
> +
> + return snd_soc_dai_set_sysclk(cpu_dai, 0, mclk_fs,
> + SND_SOC_CLOCK_OUT);
return snd_soc_dai_set_sysclk(cpu_dai, 0, params_rate(params) * 256,
SND_SOC_CLOCK_OUT);
?
> +static int mt8195_dptx_codec_init(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct mt8195_mt6359_rt1011_rt5682_priv *priv =
> + snd_soc_card_get_drvdata(rtd->card);
> + struct snd_soc_component *cmpnt_codec =
> + asoc_rtd_to_codec(rtd, 0)->component;
> + int ret = 0;
unnecessary init
> + ret = snd_soc_card_jack_new(rtd->card, "DP Jack", SND_JACK_LINEOUT,
> + &priv->dp_jack, NULL, 0);
> + if (ret)
> + return ret;
> +
> + return snd_soc_component_set_jack(cmpnt_codec, &priv->dp_jack, NULL);
> +}
> +
> +static int mt8195_hdmi_codec_init(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct mt8195_mt6359_rt1011_rt5682_priv *priv =
> + snd_soc_card_get_drvdata(rtd->card);
> + struct snd_soc_component *cmpnt_codec =
> + asoc_rtd_to_codec(rtd, 0)->component;
> + int ret = 0;
unnecessary init
> + ret = snd_soc_card_jack_new(rtd->card, "HDMI Jack", SND_JACK_LINEOUT,
> + &priv->hdmi_jack, NULL, 0);
> + if (ret)
> + return ret;
> +
> + return snd_soc_component_set_jack(cmpnt_codec, &priv->hdmi_jack, NULL);
> +}
> +
> +static int mt8195_hdmitx_dptx_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
> + struct snd_pcm_hw_params *params)
> +
spurious line?
> +{
> + /* fix BE i2s format to 32bit, clean param mask first */
> + snd_mask_reset_range(hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT),
> + 0, (__force unsigned int)SNDRV_PCM_FORMAT_LAST);
> +
> + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
> +
> + return 0;
> +}
> +
> +static int mt8195_playback_startup(struct snd_pcm_substream *substream)
> +{
> + static const unsigned int rates[] = {
> + 48000
> + };
> + static const unsigned int channels[] = {
> + 2
> + };
> + static const struct snd_pcm_hw_constraint_list constraints_rates = {
> + .count = ARRAY_SIZE(rates),
> + .list = rates,
> + .mask = 0,
> + };
> + static const struct snd_pcm_hw_constraint_list constraints_channels = {
> + .count = ARRAY_SIZE(channels),
> + .list = channels,
> + .mask = 0,
> + };
actually now I realize it's only the number of channels that differs...
> +
> + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
> + struct snd_pcm_runtime *runtime = substream->runtime;
> + int ret;
> +
> + ret = snd_pcm_hw_constraint_list(runtime, 0,
> + SNDRV_PCM_HW_PARAM_RATE,
> + &constraints_rates);
> + if (ret < 0) {
> + dev_err(rtd->dev, "hw_constraint_list rate failed\n");
> + return ret;
> + }
> +
> + ret = snd_pcm_hw_constraint_list(runtime, 0,
> + SNDRV_PCM_HW_PARAM_CHANNELS,
> + &constraints_channels);
> + if (ret < 0) {
> + dev_err(rtd->dev, "hw_constraint_list channel failed\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +static struct snd_soc_dai_link mt8195_mt6359_rt1011_rt5682_dai_links[] = {
> + /* FE */
> + [DAI_LINK_DL2_FE] = {
> + .name = "DL2_FE",
> + .stream_name = "DL2 Playback",
> + .trigger = {
> + SND_SOC_DPCM_TRIGGER_POST,
> + SND_SOC_DPCM_TRIGGER_POST,
> + },
> + .dynamic = 1,
> + .dpcm_playback = 1,
> + .ops = &mt8195_playback_ops,
> + SND_SOC_DAILINK_REG(DL2_FE),
> + },
> + [DAI_LINK_DL3_FE] = {
> + .name = "DL3_FE",
> + .stream_name = "DL3 Playback",
> + .trigger = {
> + SND_SOC_DPCM_TRIGGER_POST,
> + SND_SOC_DPCM_TRIGGER_POST,
> + },
> + .dynamic = 1,
> + .dpcm_playback = 1,
> + .ops = &mt8195_playback_ops,
> + SND_SOC_DAILINK_REG(DL3_FE),
> + },
> + [DAI_LINK_DL6_FE] = {
> + .name = "DL6_FE",
> + .stream_name = "DL6 Playback",
> + .trigger = {
> + SND_SOC_DPCM_TRIGGER_POST,
> + SND_SOC_DPCM_TRIGGER_POST,
> + },
> + .dynamic = 1,
> + .dpcm_playback = 1,
> + .ops = &mt8195_playback_ops,
> + SND_SOC_DAILINK_REG(DL6_FE),
> + },
> + [DAI_LINK_DL7_FE] = {
> + .name = "DL7_FE",
> + .stream_name = "DL7 Playback",
> + .trigger = {
> + SND_SOC_DPCM_TRIGGER_PRE,
> + SND_SOC_DPCM_TRIGGER_PRE,
> + },
this is interesting, is it intentional that the trigger order is
different from all FEs?
> + .dynamic = 1,
> + .dpcm_playback = 1,
also no .ops?
> + SND_SOC_DAILINK_REG(DL7_FE),
> + },
> + [DAI_LINK_DL8_FE] = {
> + .name = "DL8_FE",
> + .stream_name = "DL8 Playback",
> + .trigger = {
> + SND_SOC_DPCM_TRIGGER_POST,
> + SND_SOC_DPCM_TRIGGER_POST,
> + },
> + .dynamic = 1,
> + .dpcm_playback = 1,
> + .ops = &mt8195_playback_ops,
> + SND_SOC_DAILINK_REG(DL8_FE),
> + },
> + [DAI_LINK_DL10_FE] = {
> + .name = "DL10_FE",
> + .stream_name = "DL10 Playback",
> + .trigger = {
> + SND_SOC_DPCM_TRIGGER_POST,
> + SND_SOC_DPCM_TRIGGER_POST,
> + },
> + .dynamic = 1,
> + .dpcm_playback = 1,
> + .ops = &mt8195_hdmitx_dptx_playback_ops,
> + SND_SOC_DAILINK_REG(DL10_FE),
> + },
> + [DAI_LINK_DL11_FE] = {
> + .name = "DL11_FE",
> + .stream_name = "DL11 Playback",
> + .trigger = {
> + SND_SOC_DPCM_TRIGGER_POST,
> + SND_SOC_DPCM_TRIGGER_POST,
> + },
> + .dynamic = 1,
> + .dpcm_playback = 1,
> + .ops = &mt8195_playback_ops,
> + SND_SOC_DAILINK_REG(DL11_FE),
> + },
> + [DAI_LINK_UL1_FE] = {
> + .name = "UL1_FE",
> + .stream_name = "UL1 Capture",
> + .trigger = {
> + SND_SOC_DPCM_TRIGGER_PRE,
> + SND_SOC_DPCM_TRIGGER_PRE,
and again here, why PRE and no ops?
> +static int mt8195_mt6359_rt1011_rt5682_dev_probe(struct platform_device *pdev)
> +{
> + struct snd_soc_card *card = &mt8195_mt6359_rt1011_rt5682_soc_card;
> + struct device_node *platform_node;
> + struct snd_soc_dai_link *dai_link;
> + struct mt8195_mt6359_rt1011_rt5682_priv *priv = NULL;
initialization is not necessary
> + int ret, i;
> +
> + card->dev = &pdev->dev;
> +
> + platform_node = of_parse_phandle(pdev->dev.of_node,
> + "mediatek,platform", 0);
> + if (!platform_node) {
> + dev_dbg(&pdev->dev, "Property 'platform' missing or invalid\n");
> + return -EINVAL;
> + }
> +
> + for_each_card_prelinks(card, i, dai_link) {
> + if (!dai_link->platforms->name)
> + dai_link->platforms->of_node = platform_node;
> +
> + if (strcmp(dai_link->name, "DPTX_BE") == 0) {
> + dai_link->codecs->of_node =
> + of_parse_phandle(pdev->dev.of_node,
> + "mediatek,dptx-codec", 0);
> + if (!dai_link->codecs->of_node) {
> + dev_dbg(&pdev->dev, "No property 'dptx-codec'\n");
> + } else {
> + dai_link->codecs->name = NULL;
> + dai_link->codecs->dai_name = "i2s-hifi";
> + dai_link->init = mt8195_dptx_codec_init;
> + }
> + }
> +
> + if (strcmp(dai_link->name, "ETDM3_OUT_BE") == 0) {
> + dai_link->codecs->of_node =
> + of_parse_phandle(pdev->dev.of_node,
> + "mediatek,hdmi-codec", 0);
> + if (!dai_link->codecs->of_node) {
> + dev_dbg(&pdev->dev, "No property 'hdmi-codec'\n");
> + } else {
> + dai_link->codecs->name = NULL;
> + dai_link->codecs->dai_name = "i2s-hifi";
> + dai_link->init = mt8195_hdmi_codec_init;
> + }
> + }
> + }
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + snd_soc_card_set_drvdata(card, priv);
> +
> + ret = devm_snd_soc_register_card(&pdev->dev, card);
> + if (ret)
> + dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
> + __func__, ret);
> + return ret;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id mt8195_mt6359_rt1011_rt5682_dt_match[] = {
> + {.compatible = "mediatek,mt8195_mt6359_rt1011_rt5682",},
> + {}
> +};
> +#endif
> +
> +static const struct dev_pm_ops mt8195_mt6359_rt1011_rt5682_pm_ops = {
> + .poweroff = snd_soc_poweroff,
> + .restore = snd_soc_resume,
> +};
> +
> +static struct platform_driver mt8195_mt6359_rt1011_rt5682_driver = {
> + .driver = {
> + .name = "mt8195_mt6359_rt1011_rt5682",
> +#ifdef CONFIG_OF
> + .of_match_table = mt8195_mt6359_rt1011_rt5682_dt_match,
> +#endif
> + .pm = &mt8195_mt6359_rt1011_rt5682_pm_ops,
> + },
> + .probe = mt8195_mt6359_rt1011_rt5682_dev_probe,
> +};
> +
> +module_platform_driver(mt8195_mt6359_rt1011_rt5682_driver);
> +
> +/* Module information */
> +MODULE_DESCRIPTION("MT8195-MT6359-RT1011-RT5682 ALSA SoC machine driver");
> +MODULE_AUTHOR("Trevor Wu <trevor.wu at mediatek.com>");
> +MODULE_LICENSE("GPL v2");
"GPL" is enough
> +MODULE_ALIAS("mt8195_mt6359_rt1011_rt5682 soc card");
>
More information about the linux-arm-kernel
mailing list