[PATCH 4/8] dt-bindings: clock: arm, syscon-icst: Use 'reg' instead of 'vco-offset' for VCO register address

[Rob Herring]

'reg' is the standard property for defining register banks/addresses. Add
it to use for the VCO register address and deprecate 'vco-offset'. This
will also allow for using standard node names with unit-addresses.

Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: Stephen Boyd <sboyd at kernel.org>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-clk at vger.kernel.org
Cc: Michael Turquette <mturquette at baylibre.com>
Signed-off-by: Rob Herring <robh at kernel.org>
---
 Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
index 118c5543e037..c346287ca15d 100644
--- a/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
+++ b/Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
@@ -69,6 +69,10 @@ properties:
       - arm,impd1-vco1
       - arm,impd1-vco2
 
+  reg:
+    maxItems: 1
+    description: The VCO register
+
   clocks:
     description: Parent clock for the ICST VCO
     maxItems: 1
@@ -83,6 +87,7 @@ properties:
   vco-offset:
     $ref: '/schemas/types.yaml#/definitions/uint32'
     description: Offset to the VCO register for the oscillator
+    deprecated
 
 required:
   - "#clock-cells"
-- 
2.30.2