[PATCH v3 0/2] arm64: dts: amlogic: add support for Radxa Zero

Christian Hewitt christianshewitt at gmail.com
Thu Sep 9 03:21:52 PDT 2021


This adds support for the Radxa Zero SBC. The device-tree is loosely
based upon existing support for SEI510 and U200 (also G12A boards)
and has been developed with the 4/32 board configuration.

Changes since v2:
- Add Rob's bindings ack
- Drop interrupts from wifi node

Changes since v1:
- Drop flash_1v8 and use vcc_1v8
- Rename dc_in to ao_5v
- Rename vcc_5v to hdmi_pw and drop GPIO control

Christian Hewitt (2):
  dt-bindings: arm: amlogic: add support for Radxa Zero
  arm64: dts: amlogic: add support for Radxa Zero

 .../devicetree/bindings/arm/amlogic.yaml      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../dts/amlogic/meson-g12a-radxa-zero.dts     | 405 ++++++++++++++++++
 3 files changed, 407 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts

-- 
2.17.1




More information about the linux-arm-kernel mailing list