[PATCH 2/3] PCI: imx: add err check to host init and fix regulator dump
Lucas Stach
l.stach at pengutronix.de
Wed Sep 8 01:42:07 PDT 2021
Am Mittwoch, dem 08.09.2021 um 14:59 +0800 schrieb Richard Zhu:
> Since there is error return check of the host_init callback, add error
> check to imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> function.
>
> Because that i.MX PCIe doesn't support the hot-plug feature. To save
> power consumption as much as possible, turn off the clocks and power
> supplies when the PCIe PHY link is never came up in probe procedure.
>
> When PCIe link is never came up and vpcie regulator is present, there
> would be following dump when try to put the regulator.
> Disable this regulator to fix this dump when link is never came up.
>
> [ 2.335880] imx6q-pcie 33800000.pcie: Phy link never came up
> [ 2.341642] imx6q-pcie: probe of 33800000.pcie failed with error -110
> [ 2.348160] ------------[ cut here ]------------
> [ 2.352778] WARNING: CPU: 3 PID: 119 at drivers/regulator/core.c:2256 _regulator_put.part.0+0x14c/0x158
> [ 2.362184] Modules linked in:
> [ 2.365243] CPU: 3 PID: 119 Comm: kworker/u8:2 Not tainted 5.13.0-rc7-next-20210625-94710-ge4e92b2588a3 #10
> [ 2.374987] Hardware name: FSL i.MX8MM EVK board (DT)
> [ 2.380040] Workqueue: events_unbound async_run_entry_fn
> [ 2.385359] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
> [ 2.391369] pc : _regulator_put.part.0+0x14c/0x158
> [ 2.396163] lr : regulator_put+0x34/0x48
> [ 2.400088] sp : ffff8000122ebb30
> [ 2.403400] x29: ffff8000122ebb30 x28: ffff800011be7000 x27: 0000000000000000
> [ 2.410546] x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000025f2bc
> [ 2.417689] x23: ffff00000025f2c0 x22: ffff00000025f010 x21: ffff8000122ebc18
> [ 2.424834] x20: ffff800011e3fa60 x19: ffff00000375fd80 x18: 0000000000000010
> [ 2.431979] x17: 000000040044ffff x16: 00400032b5503510 x15: 0000000000000108
> [ 2.439124] x14: ffff0000003cc938 x13: 00000000ffffffea x12: 0000000000000000
> [ 2.446267] x11: 0000000000000000 x10: ffff80001076ba88 x9 : ffff80001076a540
> [ 2.453411] x8 : ffff00000025f2c0 x7 : ffff0000001f4450 x6 : ffff000000176cd8
> [ 2.460556] x5 : ffff000003857880 x4 : 0000000000000000 x3 : ffff800011e3fe30
> [ 2.467700] x2 : ffff0000003cc4c0 x1 : 0000000000000000 x0 : 0000000000000001
> [ 2.474847] Call trace:
> [ 2.477295] _regulator_put.part.0+0x14c/0x158
> [ 2.481742] regulator_put+0x34/0x48
> [ 2.485322] devm_regulator_release+0x10/0x18
> [ 2.489681] release_nodes+0x38/0x60
> [ 2.493262] devres_release_all+0x88/0xd0
> [ 2.497276] really_probe+0xd0/0x2e8
> [ 2.500858] __driver_probe_device+0x74/0xd8
> [ 2.505137] driver_probe_device+0x7c/0x108
> [ 2.509325] __device_attach_driver+0x8c/0xd0
> [ 2.513685] bus_for_each_drv+0x74/0xc0
> [ 2.517531] __device_attach_async_helper+0xb4/0xd8
> [ 2.522419] async_run_entry_fn+0x30/0x100
> [ 2.526521] process_one_work+0x19c/0x320
> [ 2.530532] worker_thread+0x48/0x418
> [ 2.534199] kthread+0x14c/0x158
> [ 2.537432] ret_from_fork+0x10/0x18
> [ 2.541013] ---[ end trace 3664ca4a50ce849b ]---
>
> Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 28 +++++++++++++++++++--------
> 1 file changed, 20 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 0264432e4c4a..129928e42f84 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -144,6 +144,7 @@ struct imx6_pcie {
> #define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3)
>
> static int imx6_pcie_clk_enable(struct imx6_pcie *imx6_pcie);
> +static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie);
>
> static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val)
> {
> @@ -485,24 +486,24 @@ static void imx7d_pcie_wait_for_phy_pll_lock(struct imx6_pcie *imx6_pcie)
> dev_err(dev, "PCIe PLL lock timeout\n");
> }
>
> -static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> +static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> {
> struct dw_pcie *pci = imx6_pcie->pci;
> struct device *dev = pci->dev;
> - int ret;
> + int ret, err;
Why do we need a separate variable for the error code here? Why not
just use the existing ret?
>
> if (imx6_pcie->vpcie && !regulator_is_enabled(imx6_pcie->vpcie)) {
> ret = regulator_enable(imx6_pcie->vpcie);
> if (ret) {
> dev_err(dev, "failed to enable vpcie regulator: %d\n",
> ret);
> - return;
> + return ret;
> }
> }
>
> - ret = imx6_pcie_clk_enable(imx6_pcie);
> - if (ret) {
> - dev_err(dev, "unable to enable pcie clocks\n");
> + err = imx6_pcie_clk_enable(imx6_pcie);
> + if (err) {
> + dev_err(dev, "unable to enable pcie clocks: %d\n", err);
> goto err_clks;
> }
>
> @@ -557,7 +558,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> break;
> }
>
> - return;
> + return 0;
>
> err_clks:
> if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) {
> @@ -566,6 +567,7 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> dev_err(dev, "failed to disable vpcie regulator: %d\n",
> ret);
> }
> + return err;
> }
>
> static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> @@ -810,17 +812,27 @@ static int imx6_pcie_start_link(struct dw_pcie *pci)
> dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG0),
> dw_pcie_readl_dbi(pci, PCIE_PORT_DEBUG1));
> imx6_pcie_reset_phy(imx6_pcie);
> + imx6_pcie_clk_disable(imx6_pcie);
This is a separate fix for the clock enable counts, that isn't
mentioned in the commit message.
It seems like this patch fixes in fact 3 issues: error propagation from
host_init, fix regulator reference handling, fix clk reference
handling. Either split up the patch along those changes (if possible)
or improve the commit message to explain those changes.
Regards,
Lucas
> + if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0)
> + regulator_disable(imx6_pcie->vpcie);
> return ret;
> }
>
> static int imx6_pcie_host_init(struct pcie_port *pp)
> {
> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct device *dev = pci->dev;
> struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci);
> + int ret;
>
> imx6_pcie_assert_core_reset(imx6_pcie);
> imx6_pcie_init_phy(imx6_pcie);
> - imx6_pcie_deassert_core_reset(imx6_pcie);
> + ret = imx6_pcie_deassert_core_reset(imx6_pcie);
> + if (ret < 0) {
> + dev_err(dev, "pcie host init failed: %d.\n", ret);
> + return ret;
> + }
> +
> imx6_setup_phy_mpll(imx6_pcie);
>
> return 0;
More information about the linux-arm-kernel
mailing list