[PATCH v3 00/10] iio: adc: at91-sama5d2_adc: add support for sama7g5

[Jonathan Cameron]

On Wed, 1 Sep 2021 15:30:03 +0300
Eugen Hristev <eugen.hristev at microchip.com> wrote:

> Hi,
> 
> This series adds support for sama7g5.
> 
> The sama7g5 is slightly different from sama5d2, but has the same basic
> operations. The register map is a bit different, so, I added some primitives
> to differentiate between the two classes of hardware blocks (sama5d2-sam9x60
> and sama7g5).
> 
> Sama7g5 has 16 channels ADC, no resistive touch, and extra features
> (FIFOs, better oversampling , not implemented yet).
> 
> It is a rework of the series initially sent here:
> https://marc.info/?l=linux-iio&m=161461656807826&w=2
> 
> Changes in v3:
> updates for the channel indexes ABI
> minor nitpicks fixes
> fixed krobot report

v2 dropped,
v3 1-8 applied to the togreg branch of iio.git and initially pushed out as testing
for 0-day to poke at and to allow me to rebase after rc1 is available.

Thanks,

Jonathan

> 
> 
> 
> Changes in v2:
> 
> I reworked this according to review by Jonathan, meaning that first I created
> a no-op patch that will convert the driver to a more platform specific data
> dedicated type of driver. This adds various structures that hold things like
> register layout and channel information.
> After this I created few patches that implement the main differences between
> sama7g5 and older products: the end-of-conversion new register. I added
> helper functions to make code more easy to read and more simple.
> One the last patches adds the layout and channels for sama7g5.
> At this moment in linux-next, the DT for sama7g5 and sama7g5ek is present,
> and the last patches add and enable this node in DT for this board.
> 
> Eugen
> 
> 
> 
> Eugen Hristev (10):
>   dt-bindings: iio: adc: at91-sama5d2: add compatible for sama7g5-adc
>   iio: adc: at91-sama5d2_adc: initialize hardware after clock is started
>   iio: adc: at91-sama5d2_adc: remove unused definition
>   iio: adc: at91-sama5d2_adc: convert to platform specific data
>     structures
>   iio: adc: at91-sama5d2_adc: add support for separate end of conversion
>     registers
>   iio: adc: at91-sama5d2_adc: add helper for COR register
>   iio: adc: at91-sama5d2_adc: add support for sama7g5 device
>   iio: adc: at91-sama5d2_adc: update copyright and authors information
>   ARM: dts: at91: sama7g5: add node for the ADC
>   ARM: dts: at91: sama7g5ek: enable ADC on the board
> 
>  .../bindings/iio/adc/atmel,sama5d2-adc.yaml   |   1 +
>  arch/arm/boot/dts/at91-sama7g5ek.dts          |   8 +
>  arch/arm/boot/dts/sama7g5.dtsi                |  16 +
>  drivers/iio/adc/at91-sama5d2_adc.c            | 594 ++++++++++++------
>  4 files changed, 432 insertions(+), 187 deletions(-)
>