[RFC PATCH 6/7] [DO NOT MERGE] clk: sunxi-ng: Add support for H6

[Samuel Holland]

On 9/3/21 9:51 AM, Maxime Ripard wrote:
> On Wed, Sep 01, 2021 at 12:39:50AM -0500, Samuel Holland wrote:
>> H6 has IOSC calibration and an ext-osc32k input.
>>
>> H6 has the osc32k mux and the rtc-32k mux, but no fanout mux.
>>
>> Signed-off-by: Samuel Holland <samuel at sholland.org>
>> ---
>>  drivers/clk/sunxi-ng/sun50i-rtc-ccu.c | 49 +++++++++++++++++++++++++++
>>  drivers/rtc/rtc-sun6i.c               | 17 ----------
>>  2 files changed, 49 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/clk/sunxi-ng/sun50i-rtc-ccu.c b/drivers/clk/sunxi-ng/sun50i-rtc-ccu.c
>> index 1dfa05c2f0e9..9603dc0d3d7b 100644
>> --- a/drivers/clk/sunxi-ng/sun50i-rtc-ccu.c
>> +++ b/drivers/clk/sunxi-ng/sun50i-rtc-ccu.c
>> @@ -227,6 +227,16 @@ static SUNXI_CCU_MUX_DATA_WITH_GATE(osc32k_fanout_clk, "rtc-32k-fanout",
>>  static SUNXI_CCU_M_FW_WITH_GATE(rtc_spi_clk, "rtc-spi", "ahb",
>>  				0x310, 0, 5, BIT(31), 0);
>>  
>> +static struct ccu_common *sun50i_h6_rtc_ccu_clks[] = {
>> +	&iosc_clk,
>> +	&iosc_32k_clk,
>> +	&ext_osc32k_gate_clk.common,
>> +	&osc32k_clk.common,
>> +	&osc24M_32k_clk.common,
>> +	&rtc_32k_mux_clk.common,
>> +	&osc32k_fanout_clk.common,
>> +};
>> +
>>  static struct ccu_common *sun50i_h616_rtc_ccu_clks[] = {
>>  	&iosc_clk,
>>  	&iosc_32k_clk,
>> @@ -246,6 +256,21 @@ static struct ccu_common *sun50i_r329_rtc_ccu_clks[] = {
>>  	&rtc_spi_clk.common,
>>  };
>>  
>> +static struct clk_hw_onecell_data sun50i_h6_rtc_ccu_hw_clks = {
>> +	.num = CLK_NUMBER,
>> +	.hws = {
>> +		[CLK_OSC32K]		= &osc32k_clk.common.hw,
>> +		[CLK_OSC32K_FANOUT]	= &osc32k_fanout_clk.common.hw,
>> +		[CLK_IOSC]		= &iosc_clk.hw,
>> +
>> +		[CLK_IOSC_32K]		= &iosc_32k_clk.hw,
>> +		[CLK_EXT_OSC32K_GATE]	= &ext_osc32k_gate_clk.common.hw,
>> +		[CLK_OSC24M_32K]	= &osc24M_32k_clk.common.hw,
>> +		[CLK_RTC_32K]		= &rtc_32k_mux_clk.common.hw,
>> +		[CLK_RTC_SPI]		= NULL,
>> +	},
>> +};
>> +
>>  static struct clk_hw_onecell_data sun50i_h616_rtc_ccu_hw_clks = {
>>  	.num = CLK_NUMBER,
>>  	.hws = {
>> @@ -276,6 +301,13 @@ static struct clk_hw_onecell_data sun50i_r329_rtc_ccu_hw_clks = {
>>  	},
>>  };
>>  
>> +static const struct sunxi_ccu_desc sun50i_h6_rtc_ccu_desc = {
>> +	.ccu_clks	= sun50i_h6_rtc_ccu_clks,
>> +	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_rtc_ccu_clks),
>> +
>> +	.hw_clks	= &sun50i_h6_rtc_ccu_hw_clks,
>> +};
>> +
>>  static const struct sunxi_ccu_desc sun50i_h616_rtc_ccu_desc = {
>>  	.ccu_clks	= sun50i_h616_rtc_ccu_clks,
>>  	.num_ccu_clks	= ARRAY_SIZE(sun50i_h616_rtc_ccu_clks),
>> @@ -318,6 +350,23 @@ static void __init sunxi_rtc_ccu_init(struct device_node *node,
>>  	of_sunxi_ccu_probe(node, reg, desc);
>>  }
>>  
>> +static void __init sun50i_h6_rtc_ccu_setup(struct device_node *node)
>> +{
>> +	struct clk_init_data *init;
>> +
>> +	have_iosc_calib = 1;
>> +
>> +	/* Casting away the const from a pointer to a non-const anonymous object... */
>> +	init = (struct clk_init_data *)osc32k_fanout_clk.common.hw.init;
>> +
>> +	/* Fanout only has one parent: osc32k. */
>> +	init->num_parents = 1;
>> +
>> +	sunxi_rtc_ccu_init(node, &sun50i_h6_rtc_ccu_desc);
>> +}
> 
> Indeed, that's not great.
> 
> Maybe we should just duplicate the sun50i_h6_rtc_ccu_desc (and
> osc32k_fanout_clk) to cover both cases?

Right, I could split osc32k_fanout_clk like with rtc_32k_fixed_clk and
rtc_32k_mux_clk. Then H6 would use osc32k_fanout_fixed_clk.

Regards,
Samuel