[PATCH 2/2] arm64: dts: rockchip: hook up camera on px30-evb

Heiko Stübner heiko at sntech.de
Fri Sep 3 06:13:44 PDT 2021


Am Montag, 30. August 2021, 16:13:18 CEST schrieb Heiko Stuebner:
> From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

Note to self: missing patch description, make it something like:

Enable the isp and csi phy on px30-evb and connect it to the board's
ov5695 camera.


> Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
> ---
>  arch/arm64/boot/dts/rockchip/px30-evb.dts | 52 +++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
> index c1ce9c295e5b..848bc39cf86a 100644
> --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
> +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
> @@ -114,6 +114,10 @@ &cpu3 {
>  	cpu-supply = <&vdd_arm>;
>  };
>  
> +&csi_dphy {
> +	status = "okay";
> +};
> +
>  &display_subsystem {
>  	status = "okay";
>  };
> @@ -428,6 +432,36 @@ sensor at 4c {
>  	};
>  };
>  
> +&i2c2 {
> +	status = "okay";
> +
> +	clock-frequency = <100000>;
> +
> +	/* These are relatively safe rise/fall times; TODO: measure */
> +	i2c-scl-falling-time-ns = <50>;
> +	i2c-scl-rising-time-ns = <300>;
> +
> +	ov5695: ov5695 at 36 {
> +		compatible = "ovti,ov5695";
> +		reg = <0x36>;
> +		avdd-supply = <&vcc2v8_dvp>;
> +		clocks = <&cru SCLK_CIF_OUT>;
> +		clock-names = "xvclk";
> +		dvdd-supply = <&vcc1v5_dvp>;
> +		dovdd-supply = <&vcc1v8_dvp>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&cif_clkout_m0>;
> +		reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
> +
> +		port {
> +			ucam_out: endpoint {
> +				remote-endpoint = <&mipi_in_ucam>;
> +				data-lanes = <1 2>;
> +			};
> +		};
> +	};
> +};
> +
>  &i2s1_2ch {
>  	status = "okay";
>  };
> @@ -443,6 +477,24 @@ &io_domains {
>  	vccio6-supply = <&vccio_flash>;
>  };
>  
> +&isp {
> +	status = "okay";
> +
> +	ports {
> +		port at 0 {
> +			mipi_in_ucam: endpoint at 0 {
> +				reg = <0>;
> +				data-lanes = <1 2>;
> +				remote-endpoint = <&ucam_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&isp_mmu {
> +	status = "okay";
> +};
> +
>  &pinctrl {
>  	headphone {
>  		hp_det: hp-det {
> 







More information about the linux-arm-kernel mailing list