[PATCH v3 4/5] KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs
Mathieu Desnoyers
mathieu.desnoyers at efficios.com
Thu Sep 2 08:28:36 PDT 2021
----- On Sep 1, 2021, at 4:30 PM, Sean Christopherson seanjc at google.com wrote:
> Add a test to verify an rseq's CPU ID is updated correctly if the task is
> migrated while the kernel is handling KVM_RUN. This is a regression test
> for a bug introduced by commit 72c3c0fe54a3 ("x86/kvm: Use generic xfer
> to guest work function"), where TIF_NOTIFY_RESUME would be cleared by KVM
> without updating rseq, leading to a stale CPU ID and other badness.
>
> Signed-off-by: Sean Christopherson <seanjc at google.com>
Thanks!
Acked-by: Mathieu Desnoyers <mathieu.desnoyers at efficios.com>
> ---
> tools/testing/selftests/kvm/.gitignore | 1 +
> tools/testing/selftests/kvm/Makefile | 3 +
> tools/testing/selftests/kvm/rseq_test.c | 236 ++++++++++++++++++++++++
> 3 files changed, 240 insertions(+)
> create mode 100644 tools/testing/selftests/kvm/rseq_test.c
>
> diff --git a/tools/testing/selftests/kvm/.gitignore
> b/tools/testing/selftests/kvm/.gitignore
> index 0709af0144c8..6d031ff6b68e 100644
> --- a/tools/testing/selftests/kvm/.gitignore
> +++ b/tools/testing/selftests/kvm/.gitignore
> @@ -47,6 +47,7 @@
> /kvm_page_table_test
> /memslot_modification_stress_test
> /memslot_perf_test
> +/rseq_test
> /set_memory_region_test
> /steal_time
> /kvm_binary_stats_test
> diff --git a/tools/testing/selftests/kvm/Makefile
> b/tools/testing/selftests/kvm/Makefile
> index 5832f510a16c..0756e79cb513 100644
> --- a/tools/testing/selftests/kvm/Makefile
> +++ b/tools/testing/selftests/kvm/Makefile
> @@ -80,6 +80,7 @@ TEST_GEN_PROGS_x86_64 += kvm_create_max_vcpus
> TEST_GEN_PROGS_x86_64 += kvm_page_table_test
> TEST_GEN_PROGS_x86_64 += memslot_modification_stress_test
> TEST_GEN_PROGS_x86_64 += memslot_perf_test
> +TEST_GEN_PROGS_x86_64 += rseq_test
> TEST_GEN_PROGS_x86_64 += set_memory_region_test
> TEST_GEN_PROGS_x86_64 += steal_time
> TEST_GEN_PROGS_x86_64 += kvm_binary_stats_test
> @@ -92,6 +93,7 @@ TEST_GEN_PROGS_aarch64 += dirty_log_test
> TEST_GEN_PROGS_aarch64 += dirty_log_perf_test
> TEST_GEN_PROGS_aarch64 += kvm_create_max_vcpus
> TEST_GEN_PROGS_aarch64 += kvm_page_table_test
> +TEST_GEN_PROGS_aarch64 += rseq_test
> TEST_GEN_PROGS_aarch64 += set_memory_region_test
> TEST_GEN_PROGS_aarch64 += steal_time
> TEST_GEN_PROGS_aarch64 += kvm_binary_stats_test
> @@ -103,6 +105,7 @@ TEST_GEN_PROGS_s390x += demand_paging_test
> TEST_GEN_PROGS_s390x += dirty_log_test
> TEST_GEN_PROGS_s390x += kvm_create_max_vcpus
> TEST_GEN_PROGS_s390x += kvm_page_table_test
> +TEST_GEN_PROGS_s390x += rseq_test
> TEST_GEN_PROGS_s390x += set_memory_region_test
> TEST_GEN_PROGS_s390x += kvm_binary_stats_test
>
> diff --git a/tools/testing/selftests/kvm/rseq_test.c
> b/tools/testing/selftests/kvm/rseq_test.c
> new file mode 100644
> index 000000000000..060538bd405a
> --- /dev/null
> +++ b/tools/testing/selftests/kvm/rseq_test.c
> @@ -0,0 +1,236 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#define _GNU_SOURCE /* for program_invocation_short_name */
> +#include <errno.h>
> +#include <fcntl.h>
> +#include <pthread.h>
> +#include <sched.h>
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <string.h>
> +#include <signal.h>
> +#include <syscall.h>
> +#include <sys/ioctl.h>
> +#include <asm/barrier.h>
> +#include <linux/atomic.h>
> +#include <linux/rseq.h>
> +#include <linux/unistd.h>
> +
> +#include "kvm_util.h"
> +#include "processor.h"
> +#include "test_util.h"
> +
> +#define VCPU_ID 0
> +
> +static __thread volatile struct rseq __rseq = {
> + .cpu_id = RSEQ_CPU_ID_UNINITIALIZED,
> +};
> +
> +/*
> + * Use an arbitrary, bogus signature for configuring rseq, this test does not
> + * actually enter an rseq critical section.
> + */
> +#define RSEQ_SIG 0xdeadbeef
> +
> +/*
> + * Any bug related to task migration is likely to be timing-dependent; perform
> + * a large number of migrations to reduce the odds of a false negative.
> + */
> +#define NR_TASK_MIGRATIONS 100000
> +
> +static pthread_t migration_thread;
> +static cpu_set_t possible_mask;
> +static bool done;
> +
> +static atomic_t seq_cnt;
> +
> +static void guest_code(void)
> +{
> + for (;;)
> + GUEST_SYNC(0);
> +}
> +
> +static void sys_rseq(int flags)
> +{
> + int r;
> +
> + r = syscall(__NR_rseq, &__rseq, sizeof(__rseq), flags, RSEQ_SIG);
> + TEST_ASSERT(!r, "rseq failed, errno = %d (%s)", errno, strerror(errno));
> +}
> +
> +static void *migration_worker(void *ign)
> +{
> + cpu_set_t allowed_mask;
> + int r, i, nr_cpus, cpu;
> +
> + CPU_ZERO(&allowed_mask);
> +
> + nr_cpus = CPU_COUNT(&possible_mask);
> +
> + for (i = 0; i < NR_TASK_MIGRATIONS; i++) {
> + cpu = i % nr_cpus;
> + if (!CPU_ISSET(cpu, &possible_mask))
> + continue;
> +
> + CPU_SET(cpu, &allowed_mask);
> +
> + /*
> + * Bump the sequence count twice to allow the reader to detect
> + * that a migration may have occurred in between rseq and sched
> + * CPU ID reads. An odd sequence count indicates a migration
> + * is in-progress, while a completely different count indicates
> + * a migration occurred since the count was last read.
> + */
> + atomic_inc(&seq_cnt);
> +
> + /*
> + * Ensure the odd count is visible while sched_getcpu() isn't
> + * stable, i.e. while changing affinity is in-progress.
> + */
> + smp_wmb();
> + r = sched_setaffinity(0, sizeof(allowed_mask), &allowed_mask);
> + TEST_ASSERT(!r, "sched_setaffinity failed, errno = %d (%s)",
> + errno, strerror(errno));
> + smp_wmb();
> + atomic_inc(&seq_cnt);
> +
> + CPU_CLR(cpu, &allowed_mask);
> +
> + /*
> + * Wait 1-10us before proceeding to the next iteration and more
> + * specifically, before bumping seq_cnt again. A delay is
> + * needed on three fronts:
> + *
> + * 1. To allow sched_setaffinity() to prompt migration before
> + * ioctl(KVM_RUN) enters the guest so that TIF_NOTIFY_RESUME
> + * (or TIF_NEED_RESCHED, which indirectly leads to handling
> + * NOTIFY_RESUME) is handled in KVM context.
> + *
> + * If NOTIFY_RESUME/NEED_RESCHED is set after KVM enters
> + * the guest, the guest will trigger a IO/MMIO exit all the
> + * way to userspace and the TIF flags will be handled by
> + * the generic "exit to userspace" logic, not by KVM. The
> + * exit to userspace is necessary to give the test a chance
> + * to check the rseq CPU ID (see #2).
> + *
> + * Alternatively, guest_code() could include an instruction
> + * to trigger an exit that is handled by KVM, but any such
> + * exit requires architecture specific code.
> + *
> + * 2. To let ioctl(KVM_RUN) make its way back to the test
> + * before the next round of migration. The test's check on
> + * the rseq CPU ID must wait for migration to complete in
> + * order to avoid false positive, thus any kernel rseq bug
> + * will be missed if the next migration starts before the
> + * check completes.
> + *
> + * 3. To ensure the read-side makes efficient forward progress,
> + * e.g. if sched_getcpu() involves a syscall. Stalling the
> + * read-side means the test will spend more time waiting for
> + * sched_getcpu() to stabilize and less time trying to hit
> + * the timing-dependent bug.
> + *
> + * Because any bug in this area is likely to be timing-dependent,
> + * run with a range of delays at 1us intervals from 1us to 10us
> + * as a best effort to avoid tuning the test to the point where
> + * it can hit _only_ the original bug and not detect future
> + * regressions.
> + *
> + * The original bug can reproduce with a delay up to ~500us on
> + * x86-64, but starts to require more iterations to reproduce
> + * as the delay creeps above ~10us, and the average runtime of
> + * each iteration obviously increases as well. Cap the delay
> + * at 10us to keep test runtime reasonable while minimizing
> + * potential coverage loss.
> + *
> + * The lower bound for reproducing the bug is likely below 1us,
> + * e.g. failures occur on x86-64 with nanosleep(0), but at that
> + * point the overhead of the syscall likely dominates the delay.
> + * Use usleep() for simplicity and to avoid unnecessary kernel
> + * dependencies.
> + */
> + usleep((i % 10) + 1);
> + }
> + done = true;
> + return NULL;
> +}
> +
> +int main(int argc, char *argv[])
> +{
> + int r, i, snapshot;
> + struct kvm_vm *vm;
> + u32 cpu, rseq_cpu;
> +
> + /* Tell stdout not to buffer its content */
> + setbuf(stdout, NULL);
> +
> + r = sched_getaffinity(0, sizeof(possible_mask), &possible_mask);
> + TEST_ASSERT(!r, "sched_getaffinity failed, errno = %d (%s)", errno,
> + strerror(errno));
> +
> + if (CPU_COUNT(&possible_mask) < 2) {
> + print_skip("Only one CPU, task migration not possible\n");
> + exit(KSFT_SKIP);
> + }
> +
> + sys_rseq(0);
> +
> + /*
> + * Create and run a dummy VM that immediately exits to userspace via
> + * GUEST_SYNC, while concurrently migrating the process by setting its
> + * CPU affinity.
> + */
> + vm = vm_create_default(VCPU_ID, 0, guest_code);
> +
> + pthread_create(&migration_thread, NULL, migration_worker, 0);
> +
> + for (i = 0; !done; i++) {
> + vcpu_run(vm, VCPU_ID);
> + TEST_ASSERT(get_ucall(vm, VCPU_ID, NULL) == UCALL_SYNC,
> + "Guest failed?");
> +
> + /*
> + * Verify rseq's CPU matches sched's CPU. Ensure migration
> + * doesn't occur between sched_getcpu() and reading the rseq
> + * cpu_id by rereading both if the sequence count changes, or
> + * if the count is odd (migration in-progress).
> + */
> + do {
> + /*
> + * Drop bit 0 to force a mismatch if the count is odd,
> + * i.e. if a migration is in-progress.
> + */
> + snapshot = atomic_read(&seq_cnt) & ~1;
> +
> + /*
> + * Ensure reading sched_getcpu() and rseq.cpu_id
> + * complete in a single "no migration" window, i.e. are
> + * not reordered across the seq_cnt reads.
> + */
> + smp_rmb();
> + cpu = sched_getcpu();
> + rseq_cpu = READ_ONCE(__rseq.cpu_id);
> + smp_rmb();
> + } while (snapshot != atomic_read(&seq_cnt));
> +
> + TEST_ASSERT(rseq_cpu == cpu,
> + "rseq CPU = %d, sched CPU = %d\n", rseq_cpu, cpu);
> + }
> +
> + /*
> + * Sanity check that the test was able to enter the guest a reasonable
> + * number of times, e.g. didn't get stalled too often/long waiting for
> + * sched_getcpu() to stabilize. A 2:1 migration:KVM_RUN ratio is a
> + * fairly conservative ratio on x86-64, which can do _more_ KVM_RUNs
> + * than migrations given the 1us+ delay in the migration task.
> + */
> + TEST_ASSERT(i > (NR_TASK_MIGRATIONS / 2),
> + "Only performed %d KVM_RUNs, task stalled too much?\n", i);
> +
> + pthread_join(migration_thread, NULL);
> +
> + kvm_vm_free(vm);
> +
> + sys_rseq(RSEQ_FLAG_UNREGISTER);
> +
> + return 0;
> +}
> --
> 2.33.0.153.gba50c8fa24-goog
--
Mathieu Desnoyers
EfficiOS Inc.
http://www.efficios.com
More information about the linux-arm-kernel
mailing list