[PATCH v3 02/12] KVM: arm64: selftests: Add write_sysreg_s and read_sysreg_s

Oliver Upton oupton at google.com
Wed Sep 1 16:06:10 PDT 2021


On Wed, Sep 01, 2021 at 03:48:40PM -0700, Raghavendra Rao Ananta wrote:
> On Wed, Sep 1, 2021 at 3:08 PM Oliver Upton <oupton at google.com> wrote:
> >
> > On Wed, Sep 01, 2021 at 09:28:28PM +0000, Oliver Upton wrote:
> > > On Wed, Sep 01, 2021 at 09:14:02PM +0000, Raghavendra Rao Ananta wrote:
> > > > For register names that are unsupported by the assembler or the ones
> > > > without architectural names, add the macros write_sysreg_s and
> > > > read_sysreg_s to support them.
> > > >
> > > > The functionality is derived from kvm-unit-tests and kernel's
> > > > arch/arm64/include/asm/sysreg.h.
> > > >
> > > > Signed-off-by: Raghavendra Rao Ananta <rananta at google.com>
> > >
> > > Would it be possible to just include <asm/sysreg.h>? See
> > > tools/arch/arm64/include/asm/sysreg.h
> >
> > Geez, sorry for the noise. I mistakenly searched from the root of my
> > repository, not the tools/ directory.
> >
> No worries :)
> 
> > In any case, you could perhaps just drop the kernel header there just to
> > use the exact same source for kernel and selftest.
> >
> You mean just copy/paste the entire header? There's a lot of stuff in
> there which we
> don't need it (yet).

Right. It's mostly register definitions, which I don't think is too high
of an overhead. Don't know where others stand, but I would prefer a
header that is equivalent between kernel & selftests over a concise
header.

--
Thanks,
Oliver

> > Thanks,
> > Oliver
> >
> > > > ---
> > > >  .../selftests/kvm/include/aarch64/processor.h | 61 +++++++++++++++++++
> > > >  1 file changed, 61 insertions(+)
> > > >
> > > > diff --git a/tools/testing/selftests/kvm/include/aarch64/processor.h b/tools/testing/selftests/kvm/include/aarch64/processor.h
> > > > index 3cbaf5c1e26b..082cc97ad8d3 100644
> > > > --- a/tools/testing/selftests/kvm/include/aarch64/processor.h
> > > > +++ b/tools/testing/selftests/kvm/include/aarch64/processor.h
> > > > @@ -118,6 +118,67 @@ void vm_install_exception_handler(struct kvm_vm *vm,
> > > >  void vm_install_sync_handler(struct kvm_vm *vm,
> > > >             int vector, int ec, handler_fn handler);
> > > >
> > > > +/*
> > > > + * ARMv8 ARM reserves the following encoding for system registers:
> > > > + * (Ref: ARMv8 ARM, Section: "System instruction class encoding overview",
> > > > + *  C5.2, version:ARM DDI 0487A.f)
> > > > + * [20-19] : Op0
> > > > + * [18-16] : Op1
> > > > + * [15-12] : CRn
> > > > + * [11-8]  : CRm
> > > > + * [7-5]   : Op2
> > > > + */
> > > > +#define Op0_shift  19
> > > > +#define Op0_mask   0x3
> > > > +#define Op1_shift  16
> > > > +#define Op1_mask   0x7
> > > > +#define CRn_shift  12
> > > > +#define CRn_mask   0xf
> > > > +#define CRm_shift  8
> > > > +#define CRm_mask   0xf
> > > > +#define Op2_shift  5
> > > > +#define Op2_mask   0x7
> > > > +
> > > > +/*
> > > > + * When accessed from guests, the ARM64_SYS_REG() doesn't work since it
> > > > + * generates a different encoding for additional KVM processing, and is
> > > > + * only suitable for userspace to access the register via ioctls.
> > > > + * Hence, define a 'pure' sys_reg() here to generate the encodings as per spec.
> > > > + */
> > > > +#define sys_reg(op0, op1, crn, crm, op2) \
> > > > +   (((op0) << Op0_shift) | ((op1) << Op1_shift) | \
> > > > +    ((crn) << CRn_shift) | ((crm) << CRm_shift) | \
> > > > +    ((op2) << Op2_shift))
> > > > +
> > > > +asm(
> > > > +"  .irp    num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30\n"
> > > > +"  .equ    .L__reg_num_x\\num, \\num\n"
> > > > +"  .endr\n"
> > > > +"  .equ    .L__reg_num_xzr, 31\n"
> > > > +"\n"
> > > > +"  .macro  mrs_s, rt, sreg\n"
> > > > +"  .inst   0xd5200000|(\\sreg)|(.L__reg_num_\\rt)\n"
> > > > +"  .endm\n"
> > > > +"\n"
> > > > +"  .macro  msr_s, sreg, rt\n"
> > > > +"  .inst   0xd5000000|(\\sreg)|(.L__reg_num_\\rt)\n"
> > > > +"  .endm\n"
> > > > +);
> > > > +
> > > > +/*
> > > > + * read_sysreg_s() and write_sysreg_s()'s 'reg' has to be encoded via sys_reg()
> > > > + */
> > > > +#define read_sysreg_s(reg) ({                                              \
> > > > +   u64 __val;                                                      \
> > > > +   asm volatile("mrs_s %0, "__stringify(reg) : "=r" (__val));      \
> > > > +   __val;                                                          \
> > > > +})
> > > > +
> > > > +#define write_sysreg_s(reg, val) do {                                      \
> > > > +   u64 __val = (u64)val;                                           \
> > > > +   asm volatile("msr_s "__stringify(reg) ", %x0" : : "rZ" (__val));\
> > > > +} while (0)
> > > > +
> > > >  #define write_sysreg(reg, val)                                               \
> > > >  ({                                                                   \
> > > >     u64 __val = (u64)(val);                                           \
> > > > --
> > > > 2.33.0.153.gba50c8fa24-goog
> > > >



More information about the linux-arm-kernel mailing list