[PATCH] arm64: dts: imx8mm: Add support for emtrion emCON-MX8M Mini

thanushree.sreerama at emtrion.com thanushree.sreerama at emtrion.com
Wed Sep 1 05:28:26 PDT 2021


This patch adds support for the emtrion GmbH emCON-MX8M Mini modules.
They are available with NXP i.MX 8M Mini equipped with 2 or 4 GB Memory.

The devicetree imx8mm-emcon.dtsi is the common part providing all
module components and the basic support for the SoC. The support for the
avari baseboard in the developer-kit configuration is provided by the
emcon-avari dts files.

Signed-off-by: Thanushree Sreerama <thanushree.sreerama at emtrion.com>
Reviewed by: Frank Erdrich <frank.erdrich at emtrion.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8mm-emcon-avari.dts |  23 +
 .../dts/freescale/imx8mm-emcon-avari.dtsi     | 141 ++++
 .../boot/dts/freescale/imx8mm-emcon.dtsi      | 687 ++++++++++++++++++
 4 files changed, 852 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 44890d56c194..ac67956e0bdc 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -64,5 +64,6 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 
 dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
new file mode 100644
index 000000000000..b2e8967e9687
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Frank Erdrich <frank.erdrich at emtrion.com>
+//
+
+/dts-v1/;
+
+#include "imx8mm-emcon.dtsi"
+#include "imx8mm-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX8M mini on Avari";
+	compatible = "emtrion,emcon-mx8mm-avari", "fsl,imx8mm";
+};
+
+&lvds_backlight {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
new file mode 100644
index 000000000000..127385ad36aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2021 emtrion GmbH
+// Author: Frank Erdrich <frank.erdrich at emtrion.com>
+//
+
+/ {
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		boardid = &boardID;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_wall_5p0: reg-wall5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "Main-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base3p3: reg-base3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "3V3-avari";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base1p5: reg-base1p5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_base3p3>;
+		regulator-name = "1V5-avari";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg: reg-otgvbus {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	clk_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	sgtl5000: audio-codec at a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_codec>;
+		VDDA-supply = <&reg_base3p3>;
+		VDDIO-supply = <&reg_base3p3>;
+	};
+
+	boardID: gpio at 3a {
+		compatible = "nxp,pca8574";
+		reg = <0x3a>;
+		gpio-controller;
+		#gpio-cells = <1>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	fsl,uart-has-rtscts;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "disabled";
+};
+
+&usdhc2 {
+	status = "okay";
+};
+
+
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
new file mode 100644
index 000000000000..9a0cae089568
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -0,0 +1,687 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright 2018 NXP
+// Copyright (C) 2021 emtrion GmbH
+//
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX8MM";
+	compatible = "emtrion,emcon-mx8", "fsl,imx8mm";
+
+	chosen {
+		bootargs = "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200";
+		stdout-path = &uart1;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rpmsg_reserved: rpmsg at 0xb8000000 {
+			no-map;
+			reg = <0 0xb8000000 0 0x400000>;
+		};
+
+		ivshmem_reserved: ivshmem at bbb00000 {
+			no-map;
+			reg = <0 0xbbb00000 0x0 0x00100000>;
+		};
+
+		ivshmem2_reserved: ivshmem2 at bba00000 {
+			no-map;
+			reg = <0 0xbba00000 0x0 0x00100000>;
+		};
+
+		pci_reserved: pci at bb800000 {
+			no-map;
+			reg = <0 0xbb800000 0x0 0x00200000>;
+		};
+
+		loader_reserved: loader at bb700000 {
+			no-map;
+			reg = <0 0xbb700000 0x0 0x00100000>;
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		/* dummy entry, required for pcie */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	som_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		green {
+			label = "som:green";
+			gpios = <&gpio3 4 0>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		red {
+			label = "som:red";
+			gpios = <&gpio5 10 0>;
+			default-state = "off";
+		};
+	};
+
+	lvds_backlight: lvds-backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <
+			0 4 8 16 32 64 80 96 112
+			128 144 160 176 250
+		>;
+		default-brightness-level = <9>;
+		status = "disabled";
+	};
+
+	reg_usdhc1_vmmc: regulator-emmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		off-on-delay = <20000>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		off-on-delay = <20000>;
+		enable-active-high;
+	};
+
+	busfreq {
+		/* Disable busfreq, to avoid 1st Linux busfreq crash other inmates */
+		status = "disabled";
+	};
+};
+
+
+&cpu_pd_wait {
+	/delete-property/ compatible;
+	/* arm,psci-suspend-param = <0x0>; */
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	emcon-mx8 {
+		pinctrl_csi_pwn: csi_pwn_grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+				MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+				MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+				MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+				MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+				MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+				MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+				MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+				MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+				MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+				MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+				MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+				MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+				MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+				MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			>;
+		};
+
+		pinctrl_flexspi0: flexspi0grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
+				MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
+				MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82
+				MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82
+				MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
+				MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
+				MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x82
+			>;
+		};
+
+		pinctrl_flexspi1: flexspi1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK		0x1c2
+				MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B		0x82
+				MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0		0x82
+				MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1		0x82
+				MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2		0x82
+				MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3		0x82
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+				MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+				MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+			>;
+		};
+
+		pinctrl_ecspi1_cs: ecspi1cs {
+			fsl,pins = <
+				MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
+				MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40000
+			>;
+		};
+
+		pinctrl_gpio_led: gpioledgrp {
+			fsl,pins = <
+				MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10		0x19
+				MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+				MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+				MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+				MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+			>;
+		};
+
+		pinctrl_pcie0: pcie0grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
+				MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x41
+			>;
+		};
+
+		pinctrl_pmic: pmicirq {
+			fsl,pins = <
+				MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x41
+			>;
+		};
+
+		pinctrl_sai2: sai2grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+				MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK		0xd6
+				MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6
+				MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+				MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+				MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6
+				MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+			>;
+		};
+
+		pinctrl_spdif1: spdif1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT		0xd6
+				MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN			0xd6
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x140
+				MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x140
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+				MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+
+				/* rts and cts */
+				MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x140
+				MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x140
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+				MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x140
+				MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x140
+			>;
+		};
+
+		pinctrl_usdhc1_gpio: usdhc1grpgpio {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B		0x41
+				MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c4
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+				MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+				MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+				MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+				MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+				MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+				MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+				MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+				MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+				MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+				MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+				MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+				MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+			>;
+		};
+
+		/* no reset for sdhc2 interface */
+		pinctrl_usdhc2_gpio: usdhc2grpgpio {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+				MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x1c4
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+				MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+				MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+				MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+				MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+				MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+				MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+				MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+				MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+				MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+				MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+				MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+				MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+			fsl,pins = <
+				MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+				MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+				MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+				MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+				MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+				MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+				MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x06
+			>;
+		};
+
+		pinctrl_lvds: lvdsgrp {
+			fsl,pins = <
+				MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x06
+			>;
+		};
+	};
+};
+
+&clk {
+	init-on-array = <
+		IMX8MM_CLK_USDHC3_ROOT
+		IMX8MM_CLK_NAND_USDHC_BUS
+		IMX8MM_CLK_UART4_ROOT
+	>;
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	pinctrl-1 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: spi-flash at 0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	fsl,spi-num-chipselects = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic: bd71837 at 4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 GPIO_ACTIVE_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	rtc: rv1805 at 69 {
+		reg = <0x69>;
+		compatible = "abracon,ab1805";
+		status = "okay";
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&mu {
+	status = "okay";
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12000000>;
+	status = "disabled";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		<&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		"rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
+	status = "disabled";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 9 0>;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_usdhc1_vmmc>;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
-- 
2.20.1




More information about the linux-arm-kernel mailing list