[PATCH v2 51/52] arm64: dts: allwinner: teres-i: Add missing reg

[Maxime Ripard]

The anx6345 bridge mandates that the input port is named port at 0. Since
we have a unit-address, this implies that we need a reg property with
the same value, but it was found to be missing in the Teres-I device
tree. Make sure it's there.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 45e1abdf70a0..52e032f7fb68 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -139,6 +139,8 @@ ports {
 			#size-cells = <0>;
 
 			port at 0 {
+				reg = <0>;
+
 				anx6345_in: endpoint {
 					remote-endpoint = <&tcon0_out_anx6345>;
 				};
-- 
2.31.1