[PATCH v2 49/52] arm64: dts: allwinner: a100: Fix thermal zone node name

[Maxime Ripard]

The thermal zones one the A100 are called $device-thermal-zone.

However, the thermal zone binding explicitly requires that zones are
called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index cc321c04f121..f6d7d7f7fdab 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -343,19 +343,19 @@ r_i2c1: i2c at 7081800 {
 	};
 
 	thermal-zones {
-		cpu-thermal-zone {
+		cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
 		};
 
-		ddr-thermal-zone {
+		ddr-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 2>;
 		};
 
-		gpu-thermal-zone {
+		gpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 1>;
-- 
2.31.1