[PATCH] usb: gadget: at91_udc: Convert to GPIO descriptors
Balamanikandan Gunasundar
balamanikandan.gunasundar at microchip.com
Tue Oct 26 01:56:10 PDT 2021
Replace the legacy GPIO APIs with gpio descriptor consumer
interface. Remove all gpio inversion(active low) flags as it is
already handled by the gpiod_set_value() and gpiod_get_value()
functions.
Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar at microchip.com>
Reviewed-by: Dan Sneddon <dan.sneddon at microchip.com>
---
drivers/usb/gadget/udc/at91_udc.c | 67 +++++++++++--------------------
drivers/usb/gadget/udc/at91_udc.h | 8 ++--
2 files changed, 27 insertions(+), 48 deletions(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index eede5cedacb4..21365f185b94 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -25,7 +25,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/platform_data/atmel.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
@@ -1510,7 +1510,6 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc)
static void at91_vbus_update(struct at91_udc *udc, unsigned value)
{
- value ^= udc->board.vbus_active_low;
if (value != udc->vbus)
at91_vbus_session(&udc->gadget, value);
}
@@ -1521,7 +1520,7 @@ static irqreturn_t at91_vbus_irq(int irq, void *_udc)
/* vbus needs at least brief debouncing */
udelay(10);
- at91_vbus_update(udc, gpio_get_value(udc->board.vbus_pin));
+ at91_vbus_update(udc, gpiod_get_value(udc->board.vbus_pin));
return IRQ_HANDLED;
}
@@ -1531,7 +1530,7 @@ static void at91_vbus_timer_work(struct work_struct *work)
struct at91_udc *udc = container_of(work, struct at91_udc,
vbus_timer_work);
- at91_vbus_update(udc, gpio_get_value_cansleep(udc->board.vbus_pin));
+ at91_vbus_update(udc, gpiod_get_value_cansleep(udc->board.vbus_pin));
if (!timer_pending(&udc->vbus_timer))
mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT);
@@ -1595,7 +1594,6 @@ static void at91udc_shutdown(struct platform_device *dev)
static int at91rm9200_udc_init(struct at91_udc *udc)
{
struct at91_ep *ep;
- int ret;
int i;
for (i = 0; i < NUM_ENDPOINTS; i++) {
@@ -1615,32 +1613,23 @@ static int at91rm9200_udc_init(struct at91_udc *udc)
}
}
- if (!gpio_is_valid(udc->board.pullup_pin)) {
+ if (!udc->board.pullup_pin) {
DBG("no D+ pullup?\n");
return -ENODEV;
}
- ret = devm_gpio_request(&udc->pdev->dev, udc->board.pullup_pin,
- "udc_pullup");
- if (ret) {
- DBG("D+ pullup is busy\n");
- return ret;
- }
-
- gpio_direction_output(udc->board.pullup_pin,
- udc->board.pullup_active_low);
+ gpiod_direction_output(udc->board.pullup_pin,
+ gpiod_is_active_low(udc->board.pullup_pin));
return 0;
}
static void at91rm9200_udc_pullup(struct at91_udc *udc, int is_on)
{
- int active = !udc->board.pullup_active_low;
-
if (is_on)
- gpio_set_value(udc->board.pullup_pin, active);
+ gpiod_set_value(udc->board.pullup_pin, 1);
else
- gpio_set_value(udc->board.pullup_pin, !active);
+ gpiod_set_value(udc->board.pullup_pin, 0);
}
static const struct at91_udc_caps at91rm9200_udc_caps = {
@@ -1783,20 +1772,20 @@ static void at91udc_of_init(struct at91_udc *udc, struct device_node *np)
{
struct at91_udc_data *board = &udc->board;
const struct of_device_id *match;
- enum of_gpio_flags flags;
u32 val;
if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0)
board->vbus_polled = 1;
- board->vbus_pin = of_get_named_gpio_flags(np, "atmel,vbus-gpio", 0,
- &flags);
- board->vbus_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+ board->vbus_pin = gpiod_get_from_of_node(np, "atmel,vbus-gpio", 0,
+ GPIOD_IN, "udc_vbus");
+ if (IS_ERR(board->vbus_pin))
+ board->vbus_pin = NULL;
- board->pullup_pin = of_get_named_gpio_flags(np, "atmel,pullup-gpio", 0,
- &flags);
-
- board->pullup_active_low = (flags & OF_GPIO_ACTIVE_LOW) ? 1 : 0;
+ board->pullup_pin = gpiod_get_from_of_node(np, "atmel,pullup-gpio", 0,
+ GPIOD_ASIS, "udc_pullup");
+ if (IS_ERR(board->pullup_pin))
+ board->pullup_pin = NULL;
match = of_match_node(at91_udc_dt_ids, np);
if (match)
@@ -1884,22 +1873,14 @@ static int at91udc_probe(struct platform_device *pdev)
goto err_unprepare_iclk;
}
- if (gpio_is_valid(udc->board.vbus_pin)) {
- retval = devm_gpio_request(dev, udc->board.vbus_pin,
- "udc_vbus");
- if (retval) {
- DBG("request vbus pin failed\n");
- goto err_unprepare_iclk;
- }
-
- gpio_direction_input(udc->board.vbus_pin);
+ if (udc->board.vbus_pin) {
+ gpiod_direction_input(udc->board.vbus_pin);
/*
* Get the initial state of VBUS - we cannot expect
* a pending interrupt.
*/
- udc->vbus = gpio_get_value_cansleep(udc->board.vbus_pin) ^
- udc->board.vbus_active_low;
+ udc->vbus = gpiod_get_value_cansleep(udc->board.vbus_pin);
if (udc->board.vbus_polled) {
INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work);
@@ -1908,7 +1889,7 @@ static int at91udc_probe(struct platform_device *pdev)
jiffies + VBUS_POLL_TIMEOUT);
} else {
retval = devm_request_irq(dev,
- gpio_to_irq(udc->board.vbus_pin),
+ gpiod_to_irq(udc->board.vbus_pin),
at91_vbus_irq, 0, driver_name, udc);
if (retval) {
DBG("request vbus irq %d failed\n",
@@ -1986,8 +1967,8 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg)
enable_irq_wake(udc->udp_irq);
udc->active_suspend = wake;
- if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled && wake)
- enable_irq_wake(udc->board.vbus_pin);
+ if (udc->board.vbus_pin && !udc->board.vbus_polled && wake)
+ enable_irq_wake(gpiod_to_irq(udc->board.vbus_pin));
return 0;
}
@@ -1996,9 +1977,9 @@ static int at91udc_resume(struct platform_device *pdev)
struct at91_udc *udc = platform_get_drvdata(pdev);
unsigned long flags;
- if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled &&
+ if (udc->board.vbus_pin && !udc->board.vbus_polled &&
udc->active_suspend)
- disable_irq_wake(udc->board.vbus_pin);
+ disable_irq_wake(gpiod_to_irq(udc->board.vbus_pin));
/* maybe reconnect to host; if so, clocks on */
if (udc->active_suspend)
diff --git a/drivers/usb/gadget/udc/at91_udc.h b/drivers/usb/gadget/udc/at91_udc.h
index fd58c5b81826..28c1042f8623 100644
--- a/drivers/usb/gadget/udc/at91_udc.h
+++ b/drivers/usb/gadget/udc/at91_udc.h
@@ -109,11 +109,9 @@ struct at91_udc_caps {
};
struct at91_udc_data {
- int vbus_pin; /* high == host powering us */
- u8 vbus_active_low; /* vbus polarity */
- u8 vbus_polled; /* Use polling, not interrupt */
- int pullup_pin; /* active == D+ pulled up */
- u8 pullup_active_low; /* true == pullup_pin is active low */
+ struct gpio_desc *vbus_pin; /* high == host powering us */
+ u8 vbus_polled; /* Use polling, not interrupt */
+ struct gpio_desc *pullup_pin; /* active == D+ pulled up */
};
/*
--
2.25.1
More information about the linux-arm-kernel
mailing list