[PATCH 0/7] arm64: dts: ls1028: GPU support and cleanups

[Shawn Guo]

On Tue, Aug 31, 2021 at 03:40:06PM +0200, Michael Walle wrote:
> In an attempt to unify u-boot's and linux' device tree for the LS1028A SoC
> we first need to clean up some network related stuff. Vladimir suggested to
> move the Ethernet PHYs into the MDIO controller node, which is already the
> case for u-boot's device tree. Further we unify the use of phy-mode and
> phy-connection-type. Both have the same meaning, but phy-mode is used more
> often in the kernel and for the ls1028a both were used. Replace
> phy-connection-type with phy-mode.
> 
> Further move all the nodes which belongs to the CCSR into the /soc node.
> These are the Mali display conntroller and its associated pixel clock PLL.
> Finally, add the GPU node for the etnaviv driver under /soc.
> 
> Michael Walle (7):
>   arm64: dts: ls1028a: move pixel clock pll into /soc
>   arm64: dts: ls1028a: move Mali DP500 node into /soc
>   arm64: dts: ls1028a: add Vivante GPU node
>   arm64: dts: freescale: fix arm,sp805 compatible string
>   arm64: dts: ls1028a: disable usb controller by default
>   arm64: dts: ls1028a: move PHY nodes to MDIO controller
>   arm64: dts: ls1028a: use phy-mode instead of phy-connection-type

Applied all, except #4 which had been picked up separately.

Shawn