[PATCH V3 1/5] soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset

[Tim Harvey]

On Sun, Nov 28, 2021 at 4:50 AM Adam Ford <aford173 at gmail.com> wrote:
>
> Most of the blk-ctrl reset bits are found in one register, however
> there are two bits in offset 8 for pulling the MIPI DPHY out of reset
> and one of them needs to be set when IMX8MM_DISPBLK_PD_MIPI_CSI is brought
> out of reset or the MIPI_CSI hangs.
>
> Since MIPI_DSI is impacted, add the additional one for MIPI_DSI too.
>
> Fixes: 926e57c065df ("soc: imx: imx8m-blk-ctrl: add DISP blk-ctrl")
> Signed-off-by: Adam Ford <aford173 at gmail.com>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
> ---
> V3:  Split the  mipi_phy_rst_mask for CSI and DSI into their respective domains.
>
> V2:  Make a note that the extra register is only for Mini/Nano DISPLAY_BLK_CTRL
>      Rename the new register to mipi_phy_rst_mask
>      Encapsulate the edits to this register with an if-statement
>
>  drivers/soc/imx/imx8m-blk-ctrl.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>
> diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
> index 519b3651d1d9..c2f076b56e24 100644
> --- a/drivers/soc/imx/imx8m-blk-ctrl.c
> +++ b/drivers/soc/imx/imx8m-blk-ctrl.c
> @@ -17,6 +17,7 @@
>
>  #define BLK_SFT_RSTN   0x0
>  #define BLK_CLK_EN     0x4
> +#define BLK_MIPI_RESET_DIV     0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
>
>  struct imx8m_blk_ctrl_domain;
>
> @@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data {
>         const char *gpc_name;
>         u32 rst_mask;
>         u32 clk_mask;
> +
> +       /*
> +        * i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
> +        * which is used to control the reset for the MIPI Phy.
> +        * Since it's only present in certain circumstances,
> +        * an if-statement should be used before setting and clearing this
> +        * register.
> +        */
> +       u32 mipi_phy_rst_mask;
>  };
>
>  #define DOMAIN_MAX_CLKS 3
> @@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
>
>         /* put devices into reset */
>         regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> +       if (data->mipi_phy_rst_mask)
> +               regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
>
>         /* enable upstream and blk-ctrl clocks to allow reset to propagate */
>         ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
> @@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
>
>         /* release reset */
>         regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
> +       if (data->mipi_phy_rst_mask)
> +               regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
>
>         /* disable upstream clocks */
>         clk_bulk_disable_unprepare(data->num_clks, domain->clks);
> @@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
>         struct imx8m_blk_ctrl *bc = domain->bc;
>
>         /* put devices into reset and disable clocks */
> +       if (data->mipi_phy_rst_mask)
> +               regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
> +
>         regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
>         regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
>
> @@ -480,6 +497,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
>                 .gpc_name = "mipi-dsi",
>                 .rst_mask = BIT(5),
>                 .clk_mask = BIT(8) | BIT(9),
> +               .mipi_phy_rst_mask = BIT(17),
>         },
>         [IMX8MM_DISPBLK_PD_MIPI_CSI] = {
>                 .name = "dispblk-mipi-csi",
> @@ -488,6 +506,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
>                 .gpc_name = "mipi-csi",
>                 .rst_mask = BIT(3) | BIT(4),
>                 .clk_mask = BIT(10) | BIT(11),
> +               .mipi_phy_rst_mask = BIT(16),
>         },
>  };
>
> --
> 2.32.0
>

Adam,

Thanks - this is working on my hardware as well and I can display what
is captured on an imx219 to a dsi display.

Tested by: Tim Harvey <tharvey at gateworks.com> (tested on
imx8mm-venice-gw73xx-0x with imx219 support added)

Tim