[PATCH v2 2/6] hwtracing: Add trace function support for HiSilicon PCIe Tune and Trace device
Yicong Yang
yangyicong at hisilicon.com
Mon Nov 29 00:45:49 PST 2021
On 2021/11/26 2:50, Mathieu Poirier wrote:
> On Thu, Nov 25, 2021 at 04:39:46PM +0800, Yicong Yang wrote:
>> Hi Mathieu,
>>
>> Thanks for the comments! Replies inline.
>>
>> On 2021/11/25 2:51, Mathieu Poirier wrote:
>>> Hi Yicong,
>>>
>>> On Tue, Nov 16, 2021 at 05:06:21PM +0800, Yicong Yang wrote:
>>>> HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex
>>>> integrated Endpoint(RCiEP) device, providing the capability
>>>> to dynamically monitor and tune the PCIe traffic(tune),
>>>> and trace the TLP headers(trace).
>>>>
>>>
>>> Is there a reason to put "tune" and "trace" are whithin parentheses?
>>>
>>
>> yeah. I want to use these single word to denote the related function, and
>> place them in the parantheses near the function's description to make sure
>> readers can match them.
>>
>
> Probably a better idea to simply write "TLP headers" and "PCIe traffic" when
> referring to them. Otherwise it is very confusing because the reader doesn't
> know if you mean the acronym or the real definition of "tune" and "trace".
>
ok I reread the commit and seems reader will know the acronym as it's mentioned
as "*tune* the PCIe traffic" and "*trace* the TLP headers". I think the
contents in the parantheses can be simply dropped.
>>>> Add the driver for the device to enable the trace function. The driver
>>>> will create PMU device for each PTT device, and users can start trace
>>>> through perf command.
>>>>
>>>> Signed-off-by: Yicong Yang <yangyicong at hisilicon.com>
>>>> ---
>>>> drivers/Makefile | 1 +
>>>> drivers/hwtracing/Kconfig | 2 +
>>>> drivers/hwtracing/hisilicon/Kconfig | 8 +
>>>> drivers/hwtracing/hisilicon/Makefile | 2 +
>>>> drivers/hwtracing/hisilicon/hisi_ptt.c | 1146 ++++++++++++++++++++++++
>>>
>>> Not sure about the "hisilicon" directory. Right now we have "coresight",
>>> "intel_th" and "stm" - they concentrate on the technology rather than the
>>> vendor. I think "ptt" would be just fine:
>>>
>>> drivers/hwtracing/ptt/Kconfig
>>> drivers/hwtracing/ptt/Makefile
>>> drivers/hwtracing/ptt/hisi_ptt.c
>>>
>>> That way if other vendors want to introduce support for the same kind of
>>> technology we can simply put them under "drivers/hwtracing/ptt/" and things are
>>> still accurate.
>>>
>>
>> sure. sounds sensible. will rename the directory to "ptt" if no objection.
>>
>>>
>>>> 5 files changed, 1159 insertions(+)
>>>> create mode 100644 drivers/hwtracing/hisilicon/Kconfig
>>>> create mode 100644 drivers/hwtracing/hisilicon/Makefile
>>>> create mode 100644 drivers/hwtracing/hisilicon/hisi_ptt.c
>>>>
>>>> diff --git a/drivers/Makefile b/drivers/Makefile
>>>> index be5d40ae1488..bb0dc9b55ea2 100644
>>>> --- a/drivers/Makefile
>>>> +++ b/drivers/Makefile
>>>> @@ -176,6 +176,7 @@ obj-$(CONFIG_USB4) += thunderbolt/
>>>> obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
>>>> obj-y += hwtracing/intel_th/
>>>> obj-$(CONFIG_STM) += hwtracing/stm/
>>>> +obj-$(CONFIG_HISI_PTT) += hwtracing/hisilicon/
>>>> obj-$(CONFIG_ANDROID) += android/
>>>> obj-$(CONFIG_NVMEM) += nvmem/
>>>> obj-$(CONFIG_FPGA) += fpga/
>>>> diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
>>>> index 13085835a636..e3796b17541a 100644
>>>> --- a/drivers/hwtracing/Kconfig
>>>> +++ b/drivers/hwtracing/Kconfig
>>>> @@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig"
>>>>
>>>> source "drivers/hwtracing/intel_th/Kconfig"
>>>>
>>>> +source "drivers/hwtracing/hisilicon/Kconfig"
>>>> +
>>>> endmenu
>>>> diff --git a/drivers/hwtracing/hisilicon/Kconfig b/drivers/hwtracing/hisilicon/Kconfig
>>>> new file mode 100644
>>>> index 000000000000..9c3ab80d99fe
>>>> --- /dev/null
>>>> +++ b/drivers/hwtracing/hisilicon/Kconfig
>>>> @@ -0,0 +1,8 @@
>>>> +# SPDX-License-Identifier: GPL-2.0-only
>>>> +config HISI_PTT
>>>> + tristate "HiSilicon PCIe Tune and Trace Device"
>>>> + depends on PCI && HAS_DMA && HAS_IOMEM
>>>
>>> What Arm architecture are you aiming this for? Can it be found on both armv7
>>> and armv8?
>>>
>>
>> currently the device will appear on Kunpeng 930, which is armv8.
>
> Ok, then please make it dependent on armv8.
>
sure.
>>
>>>> + help
>>>> + HiSilicon PCIe Tune and Trace Device exist as a PCIe RCiEP
>>>> + device, provides support for PCIe traffic tuning and
>>>> + tracing TLP headers to the memory.
>>>
>>> Please indicate what the name of the driver will be when compiled as a module.
>>>
>>
>> sure. will add the module's name here.
>>
>>>> diff --git a/drivers/hwtracing/hisilicon/Makefile b/drivers/hwtracing/hisilicon/Makefile
>>>> new file mode 100644
>>>> index 000000000000..908c09a98161
>>>> --- /dev/null
>>>> +++ b/drivers/hwtracing/hisilicon/Makefile
>>>> @@ -0,0 +1,2 @@
>>>> +# SPDX-License-Identifier: GPL-2.0
>>>> +obj-$(CONFIG_HISI_PTT) += hisi_ptt.o
>>>> diff --git a/drivers/hwtracing/hisilicon/hisi_ptt.c b/drivers/hwtracing/hisilicon/hisi_ptt.c
>>>> new file mode 100644
>>>> index 000000000000..e11e9b6cc2a8
>>>> --- /dev/null
>>>> +++ b/drivers/hwtracing/hisilicon/hisi_ptt.c
>>>> @@ -0,0 +1,1146 @@
>>>> +// SPDX-License-Identifier: GPL-2.0
>>>> +/*
>>>> + * Driver for HiSilicon PCIe tune and trace device
>>>> + *
>>>> + * Copyright (c) 2021 HiSilicon Limited.
>>>> + */
>>>> +
>>>> +#include <linux/bitfield.h>
>>>> +#include <linux/bitops.h>
>>>> +#include <linux/delay.h>
>>>> +#include <linux/dma-iommu.h>
>>>> +#include <linux/dma-mapping.h>
>>>> +#include <linux/interrupt.h>
>>>> +#include <linux/io.h>
>>>> +#include <linux/iommu.h>
>>>> +#include <linux/iopoll.h>
>>>> +#include <linux/kfifo.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/notifier.h>
>>>> +#include <linux/pci.h>
>>>> +#include <linux/perf_event.h>
>>>> +#include <linux/sizes.h>
>>>> +#include <linux/sysfs.h>
>>>> +#include <linux/vmalloc.h>
>>>> +#include <linux/workqueue.h>
>>>> +
>>>> +#define HISI_PTT_TRACE_ADDR_SIZE 0x0800
>>>> +#define HISI_PTT_TRACE_ADDR_BASE_LO_0 0x0810
>>>> +#define HISI_PTT_TRACE_ADDR_BASE_HI_0 0x0814
>>>> +#define HISI_PTT_TRACE_ADDR_STRIDE 0x8
>>>> +#define HISI_PTT_TRACE_CTRL 0x0850
>>>> +#define HISI_PTT_TRACE_CTRL_EN BIT(0)
>>>> +#define HISI_PTT_TRACE_CTRL_RST BIT(1)
>>>> +#define HISI_PTT_TRACE_CTRL_RXTX_SEL GENMASK(3, 2)
>>>> +#define HISI_PTT_TRACE_CTRL_TYPE_SEL GENMASK(7, 4)
>>>> +#define HISI_PTT_TRACE_CTRL_DATA_FORMAT BIT(14)
>>>> +#define HISI_PTT_TRACE_CTRL_FILTER_MODE BIT(15)
>>>> +#define HISI_PTT_TRACE_CTRL_TARGET_SEL GENMASK(31, 16)
>>>> +#define HISI_PTT_TRACE_INT_STAT 0x0890
>>>> +#define HISI_PTT_TRACE_INT_STAT_MASK GENMASK(3, 0)
>>>> +#define HISI_PTT_TRACE_INT_MASK 0x0894
>>>> +#define HISI_PTT_TRACE_WR_STS 0x08a0
>>>> +#define HISI_PTT_TRACE_WR_STS_WRITE GENMASK(27, 0)
>>>> +#define HISI_PTT_TRACE_WR_STS_BUFFER GENMASK(29, 28)
>>>> +#define HISI_PTT_TRACE_STS 0x08b0
>>>> +#define HISI_PTT_TRACE_IDLE BIT(0)
>>>> +#define HISI_PTT_DEVICE_RANGE 0x0fe0
>>>> +#define HISI_PTT_LOCATION 0x0fe8
>>>> +#define HISI_PTT_CORE_ID GENMASK(15, 0)
>>>> +#define HISI_PTT_SICL_ID GENMASK(31, 16)
>>>
>>> Extra spaces between #define and the literals. Please align the values with
>>> that of HISI_PTT_TRACE_DMA_IRQ below.
>>>
>>
>> Spaces are intended to distinguish the definition of the register offset and
>> related register fields. also used in include/uapi/linux/pci_regs.h.
>>
>
> Interesting and definitely not the norm...
>
>> HISI_PTT_TRACE_DMA_IRQ is well aligned with tab but seems with problem display
>> in the mail text, maybe because the tab is not 8 characters when display.
>>
>
> In my VI terminal the '0' of HISI_PTT_TRACE_DMA_IRQ is align with the '3' in
> GENMASK(31, 16) and I suspect it is the same for other people.
>
not sure what happens, with tab=8char it's aligned on my vim and vscode. and yes
it's also aligned with '3' in GENMASK(31,16).
#define HISI_PTT_TRACE_DMA_IRQ\t\t\t0
#define HISI_PTT_TRACE_BUFLETS_CNT\t\t4
>>>> +
>>>> +#define HISI_PTT_TRACE_DMA_IRQ 0
>>>> +#define HISI_PTT_TRACE_BUFLETS_CNT 4
>>>> +#define HISI_PTT_TRACE_BUFLET_SIZE SZ_4M
>>>> +#define HISI_PTT_TRACE_BUFFER_SIZE (HISI_PTT_TRACE_BUFLET_SIZE * \
>>>> + HISI_PTT_TRACE_BUFLETS_CNT)
>>>> +#define HISI_PTT_FILTER_UPDATE_FIFO_SIZE 16
>>>> +
>>>> +/* Delay time for filter updating work */
>>>> +#define HISI_PTT_WORK_DELAY_MS 100UL
>>>> +/* Wait time for DMA hardware to reset */
>>>> +#define HISI_PTT_RESET_WAIT_MS 1000UL
>>>> +/* Poll timeout and interval for waiting hardware work to finish */
>>>> +#define HISI_PTT_WAIT_TIMEOUT_US 1000000UL
>>>> +#define HISI_PTT_WAIT_POLL_INTERVAL_US 100UL
>>>> +
>>>> +#define HISI_PCIE_CORE_PORT_ID(devfn) (PCI_FUNC(devfn) << 1)
>>>> +
>>>> +enum hisi_ptt_trace_status {
>>>> + HISI_PTT_TRACE_STATUS_OFF = 0,
>>>> + HISI_PTT_TRACE_STATUS_ON,
>>>> +};
>>>> +
>>>> +struct hisi_ptt_dma_buflet {
>>>
>>> I'm not sure what a "buflet" is... Probably best to just call this
>>> hisi_ptt_dma_buffer" if it pertains to a buffer. On that note it is hard to
>>> know due to the lack of proper structure documentation. Please have a look at
>>> how "coresight_device" is documented. The same applies to the rest of the
>>> structures declared below.
>>>
>>
>> It's mentioned in section 5 of hisi_ptt.rst as "Driver will allocate each DMA buffer
>> (we call it buflet) of 4MiB ...".
>
> I just noticed the documentation in patch 5 - I will read it before continuing
> with this set.
>
>>
>> The total DMA buffer of PTT device is divided into 4 parts, and each part is called
>> a 'buflet', which means a small buffer (there exists other words with similiar
>> format: droplet, wavelet, ...).
>>
>> The device is designed like this to make sure we won't lose any data when we have to change
>> the buffer address, the device can continue to write to the next buflet and don't
>> neet to pause.
>>
>>>> + struct list_head list;
>>>> + unsigned int size;
>>>> + dma_addr_t dma;
>>>> +
>>>> + /*
>>>> + * The address of the buflet holding the trace data.
>>>> + * See Documentation/trace/hisi-ptt.rst for the details
>>>
>>> As of this writing, hisi-ptt.rst doesn't exist.
>>>
>>
>> The comment intends to direct the user to the documentation if the user
>> want to know details about the data format. The data format is decribed
>> in the section 4 of the doc.
>>
>>>> + * of the data format.
>>>> + */
>>>> + void *addr;
>>>> + int index;
>>>> +};
>>>> +
>>>> +struct hisi_ptt_trace_ctrl {
>>>> + enum hisi_ptt_trace_status status;
>>>> + struct perf_output_handle handle;
>>>> + struct list_head trace_buf;
>>>> + /*
>>>> + * The index of the buffer which trace data
>>>> + * currently is writing to.
>>>> + */
>>>> + u32 buf_index;
>>>> +
>>>> + int default_cpu;
>>>> + u32 buflet_size;
>>>> + bool is_port;
>>>> + u32 format:1; /* Format of the traced TLP headers */
>>>> + u32 type:4; /* Type of the TLP headers to trace */
>>>> + u32 direction:2; /* Direction of the TLP headers to trace */
>>>> + u32 filter:16; /* Root port or Requester to filter the TLP headers */
>>>> +
>>>> + phys_addr_t rmr_addr;
>>>> + size_t rmr_length;
>>>> + bool has_rmr;
>>>> +};
>>>> +
>>>> +struct hisi_ptt_filter_desc {
>>>> + struct list_head list;
>>>> + struct pci_dev *pdev;
>>>> + u16 val;
>>>> +};
>>>> +
>>>> +struct hisi_ptt_pmu_buf {
>>>> + size_t length;
>>>> + int nr_pages;
>>>> + void *base;
>>>> + long pos;
>>>> +};
>>>> +
>>>> +/* Structure containing the information for filter updating */
>>>> +struct hisi_ptt_filter_update_info {
>>>> + struct pci_dev *pdev;
>>>> + u32 port_devid;
>>>> + bool is_port;
>>>> + bool is_add;
>>>> + u16 val;
>>>> +};
>>>> +
>>>> +struct hisi_ptt {
>>>> + struct hisi_ptt_trace_ctrl trace_ctrl;
>>>> + struct notifier_block hisi_ptt_nb;
>>>> + struct pmu hisi_ptt_pmu;
>>>> + void __iomem *iobase;
>>>> + struct pci_dev *pdev;
>>>> + /*
>>>> + * Use the mutex to protect the filter list and
>>>> + * serialize the perf process.
>>>> + */
>>>> + struct mutex mutex;
>>>> + const char *name;
>>>> + u16 core_id;
>>>> + u16 sicl_id;
>>>> + /* PCI device range managed by the PTT device */
>>>> + u32 upper;
>>>> + u32 lower;
>>>> + u8 busnr;
>>>> +
>>>> + /*
>>>> + * The trace TLP headers can either be filtered by certain
>>>> + * root port, or by the requester ID. Organize the filters
>>>> + * by @port_filters and @req_filters here. The mask of all
>>>> + * the valid ports is also cached for doing sanity check
>>>> + * of user input.
>>>> + */
>>>> + struct list_head port_filters;
>>>> + struct list_head req_filters;
>>>> + u16 port_mask;
>>>> +
>>>> + /*
>>>> + * We use a delayed work here to avoid indefinitely waiting for
>>>> + * the hisi_ptt->mutex which protecting the filter list. The
>>>> + * work will be delayed only if the mutex can not be held,
>>>> + * otherwise no delay will be applied.
>>>> + */
>>>> + struct delayed_work work;
>>>> + spinlock_t filter_update_lock;
>>>> + DECLARE_KFIFO(filter_update_kfifo, struct hisi_ptt_filter_update_info,
>>>> + HISI_PTT_FILTER_UPDATE_FIFO_SIZE);
>>>> +};
>>>
>>> It might be a good idea to spinoff a hisi_ptt.h for the above declarations.
>>>
>>
>> I'm not sure whether it is common or permitted to provide a header which is only used by
>> this driver with a single file.
>
> I've seen it done many times.
>
will split a header file for the driver.
>>
>>>> +
>>>> +static inline struct hisi_ptt *to_hisi_ptt(struct pmu *pmu)
>>>> +{
>>>> + return container_of(pmu, struct hisi_ptt, hisi_ptt_pmu);
>>>> +}
>>>
>>> I'm not sure there is any value to this inline function. I suggest to simply
>>> call container_of() whenever it is needed.
>>>
>>
>> ok.
>>
>>>> +
>>>> +static u16 hisi_ptt_get_filter_val(struct pci_dev *pdev)
>>>> +{
>>>> + if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
>>>> + return BIT(HISI_PCIE_CORE_PORT_ID(PCI_SLOT(pdev->devfn)));
>>>> +
>>>> + return PCI_DEVID(pdev->bus->number, pdev->devfn);
>>>> +}
>>>> +
>>>> +static int hisi_ptt_wait_trace_hw_idle(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + u32 val;
>>>> +
>>>> + return readl_poll_timeout(hisi_ptt->iobase + HISI_PTT_TRACE_STS, val,
>>>> + val & HISI_PTT_TRACE_IDLE,
>>>> + HISI_PTT_WAIT_POLL_INTERVAL_US,
>>>> + HISI_PTT_WAIT_TIMEOUT_US);
>>>> +}
>>>> +
>>>> +static void hisi_ptt_free_trace_buf(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>>>> + struct device *dev = &hisi_ptt->pdev->dev;
>>>> + struct hisi_ptt_dma_buflet *buflet, *tbuflet;
>>>> +
>>>> + list_for_each_entry_safe(buflet, tbuflet, &ctrl->trace_buf, list) {
>>>> + list_del(&buflet->list);
>>>> +
>>>> + if (ctrl->has_rmr)
>>>> + memunmap(buflet->addr);
>>>> + else
>>>> + dma_free_coherent(dev, buflet->size, buflet->addr,
>>>> + buflet->dma);
>>>> +
>>>> + kfree(buflet);
>>>> + }
>>>> +}
>>>> +
>>>> +static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>>>> + struct device *dev = &hisi_ptt->pdev->dev;
>>>> + struct hisi_ptt_dma_buflet *buflet;
>>>> + int i, ret;
>>>> +
>>>> + hisi_ptt->trace_ctrl.buf_index = 0;
>>>> +
>>>> + /* Make sure the trace buffer is empty before allocating */
>>>> + if (!list_empty(&ctrl->trace_buf)) {
>>>> + list_for_each_entry(buflet, &ctrl->trace_buf, list)
>>>> + memset(buflet->addr, 0, buflet->size);
>>>> + return 0;
>>>> + }
>>>> +
>>>> + for (i = 0; i < HISI_PTT_TRACE_BUFLETS_CNT; ++i) {
>>>> + buflet = kzalloc(sizeof(*buflet), GFP_KERNEL);
>>>> + if (!buflet) {
>>>> + ret = -ENOMEM;
>>>> + goto err;
>>>> + }
>>>> +
>>>> + if (ctrl->has_rmr) {
>>>> + phys_addr_t base = ctrl->rmr_addr + i * ctrl->buflet_size;
>>>> +
>>>> + buflet->dma = base;
>>>> + buflet->addr = memremap(base, ctrl->buflet_size, MEMREMAP_WB);
>>>> + } else {
>>>> + buflet->addr = dma_alloc_coherent(dev, ctrl->buflet_size,
>>>> + &buflet->dma, GFP_KERNEL);
>>>> + }
>>>> +
>>>> + if (!buflet->addr) {
>>>> + kfree(buflet);
>>>> + ret = -ENOMEM;
>>>> + goto err;
>>>> + }
>>>> +
>>>> + memset(buflet->addr, 0, buflet->size);
>>>> +
>>>> + buflet->index = i;
>>>> + buflet->size = ctrl->buflet_size;
>>>> + list_add_tail(&buflet->list, &ctrl->trace_buf);
>>>> + }
>>>> +
>>>> + return 0;
>>>> +err:
>>>> + hisi_ptt_free_trace_buf(hisi_ptt);
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static void hisi_ptt_trace_end(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>>> + hisi_ptt->trace_ctrl.status = HISI_PTT_TRACE_STATUS_OFF;
>>>> +}
>>>> +
>>>> +static int hisi_ptt_trace_start(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>>>> + struct hisi_ptt_dma_buflet *cur;
>>>> + u32 val;
>>>> +
>>>> + /* Check device idle before start trace */
>>>> + if (hisi_ptt_wait_trace_hw_idle(hisi_ptt)) {
>>>> + pci_err(hisi_ptt->pdev, "Failed to start trace, the device is still busy.\n");
>>>> + return -EBUSY;
>>>> + }
>>>> +
>>>> + /* Reset the DMA before start tracing */
>>>> + val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>>> + val |= HISI_PTT_TRACE_CTRL_RST;
>>>> + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>>> +
>>>> + /*
>>>> + * We'll be in the perf context where preemption is disabled,
>>>> + * so use busy loop here.
>>>> + */
>>>> + mdelay(HISI_PTT_RESET_WAIT_MS);
>>>> +
>>>> + val = readl(hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>>> + val &= ~HISI_PTT_TRACE_CTRL_RST;
>>>> + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>>> +
>>>> + /* clear the interrupt status */
>>>> + writel(HISI_PTT_TRACE_INT_STAT_MASK, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>>>> + writel(0, hisi_ptt->iobase + HISI_PTT_TRACE_INT_MASK);
>>>> +
>>>> + list_for_each_entry(cur, &ctrl->trace_buf, list) {
>>>> + writel(lower_32_bits(cur->dma),
>>>> + hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_LO_0 +
>>>> + cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
>>>> + writel(upper_32_bits(cur->dma),
>>>> + hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_BASE_HI_0 +
>>>> + cur->index * HISI_PTT_TRACE_ADDR_STRIDE);
>>>> + }
>>>> + writel(ctrl->buflet_size, hisi_ptt->iobase + HISI_PTT_TRACE_ADDR_SIZE);
>>>> +
>>>> + /* set the trace control register */
>>>> + val = FIELD_PREP(HISI_PTT_TRACE_CTRL_TYPE_SEL, ctrl->type);
>>>> + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_RXTX_SEL, ctrl->direction);
>>>> + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_DATA_FORMAT, ctrl->format);
>>>> + val |= FIELD_PREP(HISI_PTT_TRACE_CTRL_TARGET_SEL, hisi_ptt->trace_ctrl.filter);
>>>> + if (!hisi_ptt->trace_ctrl.is_port)
>>>> + val |= HISI_PTT_TRACE_CTRL_FILTER_MODE;
>>>> +
>>>> + val |= HISI_PTT_TRACE_CTRL_EN;
>>>> + writel(val, hisi_ptt->iobase + HISI_PTT_TRACE_CTRL);
>>>> +
>>>> + ctrl->status = HISI_PTT_TRACE_STATUS_ON;
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int hisi_ptt_update_aux(struct hisi_ptt *hisi_ptt, int index, bool stop)
>>>> +{
>>>> + struct perf_output_handle *handle = &hisi_ptt->trace_ctrl.handle;
>>>> + struct perf_event *event = handle->event;
>>>> + struct hisi_ptt_dma_buflet *cur;
>>>> + struct hisi_ptt_pmu_buf *buf;
>>>> +
>>>> + buf = perf_get_aux(handle);
>>>> + if (!buf || !handle->size)
>>>> + return -EINVAL;
>>>> +
>>>> + list_for_each_entry(cur, &hisi_ptt->trace_ctrl.trace_buf, list)
>>>> + if (cur->index == index)
>>>> + break;
>>>> +
>>>> + memcpy(buf->base + buf->pos, cur->addr, cur->size);
>>>> + memset(cur->addr, 0, cur->size);
>>>> + buf->pos += cur->size;
>>>> +
>>>> + if (stop) {
>>>> + perf_aux_output_end(handle, buf->pos);
>>>> + } else if (buf->length - buf->pos < cur->size) {
>>>> + perf_aux_output_skip(handle, buf->length - buf->pos);
>>>> + perf_aux_output_end(handle, buf->pos);
>>>> +
>>>> + buf = perf_aux_output_begin(handle, event);
>>>> + if (!buf)
>>>> + return -EINVAL;
>>>> +
>>>> + buf->pos = handle->head % buf->length;
>>>> + if (buf->length - buf->pos < cur->size) {
>>>> + perf_aux_output_end(handle, 0);
>>>> + return -EINVAL;
>>>> + }
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static irqreturn_t hisi_ptt_isr(int irq, void *context)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = context;
>>>> + u32 status, buf_idx;
>>>> +
>>>> + status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>>>> + buf_idx = ffs(status) - 1;
>>>> +
>>>> + /* Clear the interrupt status of buflet @buf_idx */
>>>> + writel(status, hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>>>> +
>>>> + /*
>>>> + * Update the AUX buffer and cache the current buflet index,
>>>> + * as we need to know this and save the data when the trace
>>>> + * is ended out of the interrupt handler. End the trace
>>>> + * if the updating fails.
>>>> + */
>>>> + if (hisi_ptt_update_aux(hisi_ptt, buf_idx, false))
>>>> + hisi_ptt_trace_end(hisi_ptt);
>>>> + else
>>>> + hisi_ptt->trace_ctrl.buf_index = (buf_idx + 1) % HISI_PTT_TRACE_BUFLETS_CNT;
>>>> +
>>>> + return IRQ_HANDLED;
>>>> +}
>>>> +
>>>> +static irqreturn_t hisi_ptt_irq(int irq, void *context)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = context;
>>>> + u32 status;
>>>> +
>>>> + status = readl(hisi_ptt->iobase + HISI_PTT_TRACE_INT_STAT);
>>>> + if (!(status & HISI_PTT_TRACE_INT_STAT_MASK))
>>>> + return IRQ_NONE;
>>>> +
>>>> + return IRQ_WAKE_THREAD;
>>>> +}
>>>> +
>>>> +static void hisi_ptt_irq_free_vectors(void *pdev)
>>>> +{
>>>> + pci_free_irq_vectors(pdev);
>>>> +}
>>>> +
>>>> +static int hisi_ptt_register_irq(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + struct pci_dev *pdev = hisi_ptt->pdev;
>>>> + int ret;
>>>> +
>>>> + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
>>>> + if (ret < 0) {
>>>> + pci_err(pdev, "failed to allocate irq vector, ret = %d.\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + ret = devm_add_action_or_reset(&pdev->dev, hisi_ptt_irq_free_vectors, pdev);
>>>> + if (ret < 0)
>>>> + return ret;
>>>> +
>>>> + ret = devm_request_threaded_irq(&pdev->dev,
>>>> + pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ),
>>>> + hisi_ptt_irq, hisi_ptt_isr, 0,
>>>> + "hisi-ptt", hisi_ptt);
>>>> + if (ret) {
>>>> + pci_err(pdev, "failed to request irq %d, ret = %d.\n",
>>>> + pci_irq_vector(pdev, HISI_PTT_TRACE_DMA_IRQ), ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void hisi_ptt_update_filters(struct work_struct *work)
>>>> +{
>>>> + struct delayed_work *delayed_work = to_delayed_work(work);
>>>> + struct hisi_ptt_filter_update_info info;
>>>> + struct hisi_ptt_filter_desc *filter;
>>>> + struct list_head *target_list;
>>>> + struct hisi_ptt *hisi_ptt;
>>>> +
>>>> + hisi_ptt = container_of(delayed_work, struct hisi_ptt, work);
>>>> +
>>>> + if (!mutex_trylock(&hisi_ptt->mutex)) {
>>>> + schedule_delayed_work(&hisi_ptt->work, HISI_PTT_WORK_DELAY_MS);
>>>> + return;
>>>> + }
>>>> +
>>>> + while (kfifo_get(&hisi_ptt->filter_update_kfifo, &info)) {
>>>> + target_list = info.is_port ? &hisi_ptt->port_filters :
>>>> + &hisi_ptt->req_filters;
>>>> +
>>>> + if (info.is_add) {
>>>> + filter = kzalloc(sizeof(*filter), GFP_KERNEL);
>>>> + if (!filter)
>>>> + continue;
>>>> +
>>>> + filter->pdev = info.pdev;
>>>> + filter->val = info.val;
>>>> +
>>>> + list_add_tail(&filter->list, target_list);
>>>> + } else {
>>>> + list_for_each_entry(filter, target_list, list)
>>>> + if (filter->val == info.val) {
>>>> + list_del(&filter->list);
>>>> + kfree(filter);
>>>> + break;
>>>> + }
>>>> + }
>>>> +
>>>> + /* Update the available port mask */
>>>> + if (!info.is_port)
>>>> + continue;
>>>> +
>>>> + if (info.is_add)
>>>> + hisi_ptt->port_mask |= info.val;
>>>> + else
>>>> + hisi_ptt->port_mask &= ~info.val;
>>>> + }
>>>> +
>>>> + mutex_unlock(&hisi_ptt->mutex);
>>>> +}
>>>> +
>>>> +static void hisi_ptt_update_fifo_in(struct hisi_ptt *hisi_ptt,
>>>> + struct hisi_ptt_filter_update_info *info)
>>>> +{
>>>> + struct pci_dev *root_port = pcie_find_root_port(info->pdev);
>>>> +
>>>> + if (!root_port)
>>>> + return;
>>>> +
>>>> + info->port_devid = PCI_DEVID(root_port->bus->number, root_port->devfn);
>>>> + if (info->port_devid < hisi_ptt->lower ||
>>>> + info->port_devid > hisi_ptt->upper)
>>>> + return;
>>>> +
>>>> + info->is_port = pci_pcie_type(info->pdev) == PCI_EXP_TYPE_ROOT_PORT;
>>>> + info->val = hisi_ptt_get_filter_val(info->pdev);
>>>> +
>>>> + if (kfifo_in_spinlocked(&hisi_ptt->filter_update_kfifo, info, 1,
>>>> + &hisi_ptt->filter_update_lock))
>>>> + schedule_delayed_work(&hisi_ptt->work, 0);
>>>> + else
>>>> + pci_warn(hisi_ptt->pdev,
>>>> + "filter update fifo overflow for target %s\n",
>>>> + pci_name(info->pdev));
>>>> +}
>>>> +
>>>> +/*
>>>> + * A PCI bus notifier is used here for dynamically updating the filter
>>>> + * list.
>>>> + */
>>>> +static int hisi_ptt_notifier_call(struct notifier_block *nb, unsigned long action,
>>>> + void *data)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = container_of(nb, struct hisi_ptt, hisi_ptt_nb);
>>>> + struct hisi_ptt_filter_update_info info;
>>>> + struct device *dev = data;
>>>> + struct pci_dev *pdev = to_pci_dev(dev);
>>>> +
>>>> + info.pdev = pdev;
>>>> +
>>>> + switch (action) {
>>>> + case BUS_NOTIFY_ADD_DEVICE:
>>>> + info.is_add = true;
>>>> + break;
>>>> + case BUS_NOTIFY_DEL_DEVICE:
>>>> + info.is_add = false;
>>>> + break;
>>>> + default:
>>>> + return 0;
>>>> + }
>>>> +
>>>> + hisi_ptt_update_fifo_in(hisi_ptt, &info);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data)
>>>> +{
>>>> + struct hisi_ptt_filter_update_info info = {
>>>> + .pdev = pdev,
>>>> + .is_add = true,
>>>> + };
>>>> + struct hisi_ptt *hisi_ptt = data;
>>>> +
>>>> + hisi_ptt_update_fifo_in(hisi_ptt, &info);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void hisi_ptt_release_filters(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + struct hisi_ptt_filter_desc *filter, *tfilter;
>>>> +
>>>> + list_for_each_entry_safe(filter, tfilter, &hisi_ptt->req_filters, list) {
>>>> + list_del(&filter->list);
>>>> + kfree(filter);
>>>> + }
>>>> +
>>>> + list_for_each_entry_safe(filter, tfilter, &hisi_ptt->port_filters, list) {
>>>> + list_del(&filter->list);
>>>> + kfree(filter);
>>>> + }
>>>> +}
>>>> +
>>>> +static void hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + struct pci_dev *pdev = hisi_ptt->pdev;
>>>> + struct pci_bus *bus;
>>>> + u32 reg;
>>>> +
>>>> + INIT_DELAYED_WORK(&hisi_ptt->work, hisi_ptt_update_filters);
>>>> + spin_lock_init(&hisi_ptt->filter_update_lock);
>>>> + INIT_KFIFO(hisi_ptt->filter_update_kfifo);
>>>> + INIT_LIST_HEAD(&hisi_ptt->port_filters);
>>>> + INIT_LIST_HEAD(&hisi_ptt->req_filters);
>>>> +
>>>> + /*
>>>> + * The device range register provides the information about the
>>>> + * root ports which the RCiEP can control and trace. The RCiEP
>>>> + * and the root ports it support are on the same PCIe core, with
>>>> + * same domain number but maybe different bus number. The device
>>>> + * range register will tell us which root ports we can support,
>>>> + * Bit[31:16] indicates the upper BDF numbers of the root port,
>>>> + * while Bit[15:0] indicates the lower.
>>>> + */
>>>> + reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
>>>> + hisi_ptt->upper = reg >> 16;
>>>> + hisi_ptt->lower = reg & 0xffff;
>>>> + hisi_ptt->busnr = PCI_BUS_NUM(hisi_ptt->upper);
>>>> +
>>>> + reg = readl(hisi_ptt->iobase + HISI_PTT_LOCATION);
>>>> + hisi_ptt->core_id = FIELD_GET(HISI_PTT_CORE_ID, reg);
>>>> + hisi_ptt->sicl_id = FIELD_GET(HISI_PTT_SICL_ID, reg);
>>>> +
>>>> + bus = pci_find_bus(pci_domain_nr(pdev->bus), hisi_ptt->busnr);
>>>> + if (bus)
>>>> + pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);
>>>
>>> What happens if bus is NULL? Should this be reported to the caller and cause
>>> hisi_ptt_probe() to fail? Please add a comment that describes the scenario.
>>>
>>
>> It's ok if the list is NULL in the probe process,
>> as the device maybe hotplugged after the PTT driver probe, in which case
>> we can detect the event and update the list as we register a bus notifier.
>>
>
> Please add the above as a comment in the code.
>
sure. will do.
>
>>>> +
>>>> + /* Initialize trace controls */
>>>> + INIT_LIST_HEAD(&hisi_ptt->trace_ctrl.trace_buf);
>>>> + hisi_ptt->trace_ctrl.buflet_size = HISI_PTT_TRACE_BUFLET_SIZE;
>>>> + hisi_ptt->trace_ctrl.default_cpu = cpumask_first(cpumask_of_node(dev_to_node(&pdev->dev)));
>>>> +}
>>>> +
>>>> +#define HISI_PTT_PMU_FILTER_IS_PORT BIT(19)
>>>> +#define HISI_PTT_PMU_FILTER_VAL_MASK GENMASK(15, 0)
>>>> +#define HISI_PTT_PMU_DIRECTION_MASK GENMASK(23, 20)
>>>> +#define HISI_PTT_PMU_TYPE_MASK GENMASK(31, 24)
>>>> +#define HISI_PTT_PMU_FORMAT_MASK GENMASK(35, 32)
>>>> +
>>>> +static ssize_t available_filters_show(struct device *dev,
>>>> + struct device_attribute *attr,
>>>> + char *buf)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = to_hisi_ptt(dev_get_drvdata(dev));
>>>> + struct hisi_ptt_filter_desc *filter;
>>>> + int pos = 0;
>>>> +
>>>> + if (list_empty(&hisi_ptt->port_filters))
>>>> + return sysfs_emit(buf, "#### No available filter ####\n");
>>>> +
>>>> + mutex_lock(&hisi_ptt->mutex);
>>>> + pos += sysfs_emit_at(buf, pos, "#### Root Ports ####\n");
>>>> + list_for_each_entry(filter, &hisi_ptt->port_filters, list)
>>>> + pos += sysfs_emit_at(buf, pos, "%s 0x%05lx\n",
>>>> + pci_name(filter->pdev),
>>>> + hisi_ptt_get_filter_val(filter->pdev) |
>>>> + HISI_PTT_PMU_FILTER_IS_PORT);
>>>> +
>>>> + pos += sysfs_emit_at(buf, pos, "#### Requesters ####\n");
>>>> + list_for_each_entry(filter, &hisi_ptt->req_filters, list)
>>>> + pos += sysfs_emit_at(buf, pos, "%s 0x%05x\n",
>>>> + pci_name(filter->pdev),
>>>> + hisi_ptt_get_filter_val(filter->pdev));
>>>> +
>>>> + mutex_unlock(&hisi_ptt->mutex);
>>>> + return pos;
>>>> +}
>>>> +static DEVICE_ATTR_ADMIN_RO(available_filters);
>>>> +
>>>> +PMU_FORMAT_ATTR(filter, "config:0-19");
>>>> +PMU_FORMAT_ATTR(direction, "config:20-23");
>>>> +PMU_FORMAT_ATTR(type, "config:24-31");
>>>> +PMU_FORMAT_ATTR(format, "config:32-35");
>>>> +
>>>> +static struct attribute *hisi_ptt_pmu_format_attrs[] = {
>>>> + &format_attr_filter.attr,
>>>> + &format_attr_direction.attr,
>>>> + &format_attr_type.attr,
>>>> + &format_attr_format.attr,
>>>> + NULL
>>>> +};
>>>> +
>>>> +static struct attribute_group hisi_ptt_pmu_format_group = {
>>>> + .name = "format",
>>>> + .attrs = hisi_ptt_pmu_format_attrs,
>>>> +};
>>>> +
>>>> +static struct attribute *hisi_ptt_pmu_filter_attrs[] = {
>>>> + &dev_attr_available_filters.attr,
>>>> + NULL
>>>> +};
>>>> +
>>>> +static struct attribute_group hisi_ptt_pmu_filter_group = {
>>>> + .attrs = hisi_ptt_pmu_filter_attrs,
>>>> +};
>>>> +
>>>> +static const struct attribute_group *hisi_ptt_pmu_groups[] = {
>>>> + &hisi_ptt_pmu_format_group,
>>>> + &hisi_ptt_pmu_filter_group,
>>>> + NULL
>>>> +};
>>>> +
>>>> +/*
>>>> + * The supported value of the direction parameter. See hisi_ptt.rst
>>>> + * documentation for more details.
>>>> + */
>>>> +static u32 hisi_ptt_trace_available_direction[] = {
>>>> + 0,
>>>> + 1,
>>>> + 2,
>>>> + 3,
>>>> +};
>>>> +
>>>> +/* Different types can be set simultaneously */
>>>> +static u32 hisi_ptt_trace_available_type[] = {
>>>> + 1, /* posted_request */
>>>> + 2, /* non-posted_request */
>>>> + 4, /* completion */
>>>> +};
>>>> +
>>>> +static u32 hisi_ptt_trace_availble_format[] = {
>>>> + 0, /* 4DW */
>>>> + 1, /* 8DW */
>>>> +};
>>>> +
>>>> +/*
>>>> + * Check whether the config is valid or not. Some configs are multi-selectable
>>>> + * and can be set simultaneously, while some are single selectable (onehot).
>>>> + * Use this function to check the non-onehot configs while
>>>> + * hisi_ptt_trace_valid_config_onehot() for the onehot ones.
>>>> + */
>>>> +static int hisi_ptt_trace_valid_config(u32 val, u32 *available_list, u32 list_size)
>>>> +{
>>>> + int i;
>>>> +
>>>> + /*
>>>> + * The non-onehot configs cannot be 0. Walk the available
>>>> + * list and clear the valid bits of the config. If there
>>>> + * is any resident bit after the walk then the config is
>>>> + * invalid.
>>>> + */
>>>> + for (i = 0; i < list_size; i++)
>>>> + val &= ~available_list[i];
>>>> +
>>>> + return val ? -EINVAL : 0;
>>>> +}
>>>> +
>>>> +static int hisi_ptt_trace_valid_config_onehot(u32 val, u32 *available_list, u32 list_size)
>>>> +{
>>>> + int i, ret = -EINVAL;
>>>> +
>>>> + for (i = 0; i < list_size; i++)
>>>> + if (val == available_list[i]) {
>>>> + ret = 0;
>>>> + break;
>>>> + }
>>>> +
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static int hisi_ptt_trace_init_filter(struct hisi_ptt *hisi_ptt, u64 config)
>>>> +{
>>>> + unsigned long val, port_mask = hisi_ptt->port_mask;
>>>> + struct hisi_ptt_filter_desc *filter;
>>>> + int ret = -EINVAL;
>>>> +
>>>> + hisi_ptt->trace_ctrl.is_port = FIELD_GET(HISI_PTT_PMU_FILTER_IS_PORT, config);
>>>> + val = FIELD_GET(HISI_PTT_PMU_FILTER_VAL_MASK, config);
>>>> +
>>>> + /*
>>>> + * Port filters are defined as bit mask. For port filters, check
>>>> + * the bits in the @val are within the range of hisi_ptt->port_mask
>>>> + * and whether it's empty or not, otherwise user has specified
>>>> + * some unsupported root ports.
>>>> + *
>>>> + * For Requester ID filters, walk the available filter list to see
>>>> + * whether we have one matched.
>>>> + */
>>>> + if (hisi_ptt->trace_ctrl.is_port &&
>>>> + bitmap_subset(&val, &port_mask, BITS_PER_LONG)) {
>>>> + ret = 0;
>>>> + } else {
>>>> + list_for_each_entry(filter, &hisi_ptt->req_filters, list)
>>>> + if (filter->val == val) {
>>>> + ret = 0;
>>>> + break;
>>>> + }
>>>> + }
>>>> +
>>>> + if (ret)
>>>> + return ret;
>>>> +
>>>> + hisi_ptt->trace_ctrl.filter = val;
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static int hisi_ptt_pmu_event_init(struct perf_event *event)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
>>>> + struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
>>>> + int ret;
>>>> + u32 val;
>>>> +
>>>> + if (event->attr.type != hisi_ptt->hisi_ptt_pmu.type)
>>>> + return -ENOENT;
>>>> +
>>>> + mutex_lock(&hisi_ptt->mutex);
>>>> +
>>>> + ret = hisi_ptt_trace_init_filter(hisi_ptt, event->attr.config);
>>>> + if (ret < 0)
>>>> + goto out;
>>>> +
>>>> + val = FIELD_GET(HISI_PTT_PMU_DIRECTION_MASK, event->attr.config);
>>>> + ret = hisi_ptt_trace_valid_config_onehot(val, hisi_ptt_trace_available_direction,
>>>> + ARRAY_SIZE(hisi_ptt_trace_available_direction));
>>>> + if (ret < 0)
>>>> + goto out;
>>>> + ctrl->direction = val;
>>>> +
>>>> + val = FIELD_GET(HISI_PTT_PMU_TYPE_MASK, event->attr.config);
>>>> +
>>>> + ret = hisi_ptt_trace_valid_config(val, hisi_ptt_trace_available_type,
>>>> + ARRAY_SIZE(hisi_ptt_trace_available_type));
>>>> + if (ret < 0)
>>>> + goto out;
>>>> + ctrl->type = val;
>>>> +
>>>> + val = FIELD_GET(HISI_PTT_PMU_FORMAT_MASK, event->attr.config);
>>>> + ret = hisi_ptt_trace_valid_config_onehot(val, hisi_ptt_trace_availble_format,
>>>> + ARRAY_SIZE(hisi_ptt_trace_availble_format));
>>>> + if (ret < 0)
>>>> + goto out;
>>>> + ctrl->format = val;
>>>> +
>>>> +out:
>>>> + mutex_unlock(&hisi_ptt->mutex);
>>>> + return ret;
>>>> +}
>>>> +
>>>> +static void *hisi_ptt_pmu_setup_aux(struct perf_event *event, void **pages,
>>>> + int nr_pages, bool overwrite)
>>>> +{
>>>> + struct hisi_ptt_pmu_buf *buf;
>>>> + struct page **pagelist;
>>>> + int i;
>>>> +
>>>> + if (overwrite) {
>>>> + dev_warn(event->pmu->dev, "Overwrite mode is not supported\n");
>>>> + return NULL;
>>>> + }
>>>> +
>>>> + /* If the pages size less than buflets, we cannot start trace */
>>>> + if (nr_pages < HISI_PTT_TRACE_BUFFER_SIZE / PAGE_SIZE)
>>>> + return NULL;
>>>> +
>>>> + buf = kzalloc(sizeof(*buf), GFP_KERNEL);
>>>> + if (!buf)
>>>> + return NULL;
>>>> +
>>>> + pagelist = kcalloc(nr_pages, sizeof(*pagelist), GFP_KERNEL);
>>>> + if (!pagelist) {
>>>> + kfree(buf);
>>>> + return NULL;
>>>> + }
>>>> +
>>>> + for (i = 0; i < nr_pages; i++)
>>>> + pagelist[i] = virt_to_page(pages[i]);
>>>> +
>>>> + buf->base = vmap(pagelist, nr_pages, VM_MAP, PAGE_KERNEL);
>>>> + if (!buf->base) {
>>>> + kfree(pagelist);
>>>> + kfree(buf);
>>>> + return NULL;
>>>> + }
>>>> +
>>>> + buf->nr_pages = nr_pages;
>>>> + buf->length = nr_pages * PAGE_SIZE;
>>>> + buf->pos = 0;
>>>> +
>>>> + kfree(pagelist);
>>>> + return buf;
>>>> +}
>>>> +
>>>> +static void hisi_ptt_pmu_free_aux(void *aux)
>>>> +{
>>>> + struct hisi_ptt_pmu_buf *buf = aux;
>>>> +
>>>> + vunmap(buf->base);
>>>> + kfree(buf);
>>>> +}
>>>> +
>>>> +static void hisi_ptt_pmu_start(struct perf_event *event, int flags)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
>>>> + struct perf_output_handle *handle = &hisi_ptt->trace_ctrl.handle;
>>>> + struct hw_perf_event *hwc = &event->hw;
>>>> + struct hisi_ptt_pmu_buf *buf;
>>>> + int cpu = event->cpu;
>>>> + int ret;
>>>> +
>>>> + hwc->state = 0;
>>>> + mutex_lock(&hisi_ptt->mutex);
>>>> + if (hisi_ptt->trace_ctrl.status == HISI_PTT_TRACE_STATUS_ON) {
>>>> + pci_dbg(hisi_ptt->pdev, "trace has already started\n");
>>>> + goto stop;
>>>> + }
>>>> +
>>>> + if (cpu == -1)
>>>> + cpu = hisi_ptt->trace_ctrl.default_cpu;
>>>> +
>>>> + /*
>>>> + * Handle the interrupt on the same cpu which starts the trace to avoid
>>>> + * context mismatch. Otherwise we'll trigger the WARN from the perf
>>>> + * core in event_function_local().
>>>> + */
>>>> + WARN_ON(irq_set_affinity(pci_irq_vector(hisi_ptt->pdev, HISI_PTT_TRACE_DMA_IRQ),
>>>> + cpumask_of(cpu)));
>>>> +
>>>> + ret = hisi_ptt_alloc_trace_buf(hisi_ptt);
>>>> + if (ret) {
>>>> + pci_dbg(hisi_ptt->pdev, "alloc trace buf failed, ret = %d\n", ret);
>>>> + goto stop;
>>>> + }
>>>> +
>>>> + buf = perf_aux_output_begin(handle, event);
>>>> + if (!buf) {
>>>> + pci_dbg(hisi_ptt->pdev, "aux output begin failed\n");
>>>> + goto stop;
>>>> + }
>>>> +
>>>> + buf->pos = handle->head % buf->length;
>>>> +
>>>> + ret = hisi_ptt_trace_start(hisi_ptt);
>>>> + if (ret) {
>>>> + pci_dbg(hisi_ptt->pdev, "trace start failed, ret = %d\n", ret);
>>>> + perf_aux_output_end(handle, 0);
>>>> + goto stop;
>>>> + }
>>>> +
>>>> + mutex_unlock(&hisi_ptt->mutex);
>>>> + return;
>>>> +stop:
>>>> + event->hw.state |= PERF_HES_STOPPED;
>>>> + mutex_unlock(&hisi_ptt->mutex);
>>>> +}
>>>> +
>>>> +static void hisi_ptt_pmu_stop(struct perf_event *event, int flags)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
>>>> + struct hw_perf_event *hwc = &event->hw;
>>>> +
>>>> + if (hwc->state & PERF_HES_STOPPED)
>>>> + return;
>>>> +
>>>> + mutex_lock(&hisi_ptt->mutex);
>>>> + if (hisi_ptt->trace_ctrl.status == HISI_PTT_TRACE_STATUS_ON) {
>>>> + hisi_ptt_trace_end(hisi_ptt);
>>>> + WARN(hisi_ptt_wait_trace_hw_idle(hisi_ptt), "Device is still busy");
>>>> + hisi_ptt_update_aux(hisi_ptt, hisi_ptt->trace_ctrl.buf_index, true);
>>>> + }
>>>> + mutex_unlock(&hisi_ptt->mutex);
>>>> +
>>>> + hwc->state |= PERF_HES_STOPPED;
>>>> + perf_event_update_userpage(event);
>>>> + hwc->state |= PERF_HES_UPTODATE;
>>>> +}
>>>> +
>>>> +static int hisi_ptt_pmu_add(struct perf_event *event, int flags)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = to_hisi_ptt(event->pmu);
>>>> + struct hw_perf_event *hwc = &event->hw;
>>>> + int cpu = event->cpu;
>>>> +
>>>> + if (cpu == -1 && smp_processor_id() != hisi_ptt->trace_ctrl.default_cpu)
>>>> + return 0;
>>>> +
>>>> + hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
>>>> +
>>>> + if (flags & PERF_EF_START) {
>>>> + hisi_ptt_pmu_start(event, PERF_EF_RELOAD);
>>>> + if (hwc->state & PERF_HES_STOPPED)
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +static void hisi_ptt_pmu_del(struct perf_event *event, int flags)
>>>> +{
>>>> + hisi_ptt_pmu_stop(event, PERF_EF_UPDATE);
>>>> +}
>>>> +
>>>> +static void hisi_ptt_unregister_pmu(void *priv)
>>>> +{
>>>> + perf_pmu_unregister(priv);
>>>> +}
>>>> +
>>>> +static int hisi_ptt_register_pmu(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + char *pmu_name;
>>>> + int ret;
>>>> +
>>>> + hisi_ptt->hisi_ptt_pmu = (struct pmu) {
>>>> + .module = THIS_MODULE,
>>>> + .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
>>>> + .task_ctx_nr = perf_sw_context,
>>>> + .attr_groups = hisi_ptt_pmu_groups,
>>>> + .event_init = hisi_ptt_pmu_event_init,
>>>> + .setup_aux = hisi_ptt_pmu_setup_aux,
>>>> + .free_aux = hisi_ptt_pmu_free_aux,
>>>> + .start = hisi_ptt_pmu_start,
>>>> + .stop = hisi_ptt_pmu_stop,
>>>> + .add = hisi_ptt_pmu_add,
>>>> + .del = hisi_ptt_pmu_del,
>>>> + };
>>>> +
>>>> + pmu_name = devm_kasprintf(&hisi_ptt->pdev->dev, GFP_KERNEL, "hisi_ptt%u_%u",
>>>> + hisi_ptt->sicl_id, hisi_ptt->core_id);
>>>> + if (!pmu_name)
>>>> + return -ENOMEM;
>>>> +
>>>> + ret = perf_pmu_register(&hisi_ptt->hisi_ptt_pmu, pmu_name, -1);
>>>> + if (ret)
>>>> + return ret;
>>>> +
>>>> + return devm_add_action_or_reset(&hisi_ptt->pdev->dev,
>>>> + hisi_ptt_unregister_pmu,
>>>> + &hisi_ptt->hisi_ptt_pmu);
>>>> +}
>>>> +
>>>> +/*
>>>> + * Get RMR address if provided by the firmware.
>>>> + * Return 0 if the IOMMU doesn't present or the policy of the
>>>> + * IOMMU domain is passthrough or we get a usable RMR region.
>>>> + * Otherwise a negative value is returned.
>>>> + */
>>>> +static int hisi_ptt_get_rmr(struct hisi_ptt *hisi_ptt)
>>>> +{
>>>> + struct pci_dev *pdev = hisi_ptt->pdev;
>>>> + struct iommu_domain *iommu_domain;
>>>> + struct iommu_resv_region *region;
>>>> + LIST_HEAD(list);
>>>> +
>>>> + /*
>>>> + * Use direct DMA if IOMMU does not present or the policy of the
>>>> + * IOMMU domain is passthrough.
>>>> + */
>>>> + iommu_domain = iommu_get_domain_for_dev(&pdev->dev);
>>>> + if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY)
>>>> + return 0;
>>>> +
>>>> + iommu_get_resv_regions(&pdev->dev, &list);
>>>> + list_for_each_entry(region, &list, list)
>>>> + if (region->type == IOMMU_RESV_DIRECT &&
>>>> + region->length >= HISI_PTT_TRACE_BUFFER_SIZE) {
>>>> + hisi_ptt->trace_ctrl.has_rmr = true;
>>>> + hisi_ptt->trace_ctrl.rmr_addr = region->start;
>>>> + hisi_ptt->trace_ctrl.rmr_length = region->length;
>>>> + break;
>>>> + }
>>>> +
>>>> + iommu_put_resv_regions(&pdev->dev, &list);
>>>> + return hisi_ptt->trace_ctrl.has_rmr ? 0 : -ENOMEM;
>>>> +}
>>>> +
>>>> +static int hisi_ptt_probe(struct pci_dev *pdev,
>>>> + const struct pci_device_id *id)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt;
>>>> + int ret;
>>>> +
>>>> + hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL);
>>>> + if (!hisi_ptt)
>>>> + return -ENOMEM;
>>>> +
>>>> + mutex_init(&hisi_ptt->mutex);
>>>> + hisi_ptt->pdev = pdev;
>>>> +
>>>> + /*
>>>> + * Lifetime of pci_dev is longer than hisi_ptt,
>>>> + * so directly reference to the pci name string.
>>>> + */
>>>> + hisi_ptt->name = pci_name(hisi_ptt->pdev);
>>>> + pci_set_drvdata(pdev, hisi_ptt);
>>>> +
>>>> + ret = pcim_enable_device(pdev);
>>>> + if (ret) {
>>>> + pci_err(pdev, "failed to enable device, ret = %d.\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + ret = pcim_iomap_regions(pdev, BIT(2), hisi_ptt->name);
>>>> + if (ret) {
>>>> + pci_err(pdev, "failed to remap io memory, ret = %d.\n", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + hisi_ptt->iobase = pcim_iomap_table(pdev)[2];
>>>> +
>>>> + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
>>>> + if (ret) {
>>>> + pci_err(pdev, "failed to set 64 bit dma mask, ret = %d.\n", ret);
>>>> + return ret;
>>>> + }
>>>> + pci_set_master(pdev);
>>>> +
>>>> + ret = hisi_ptt_register_irq(hisi_ptt);
>>>> + if (ret)
>>>> + return ret;
>>>> +
>>>> + hisi_ptt_init_ctrls(hisi_ptt);
>>>> +
>>>> + ret = hisi_ptt_register_pmu(hisi_ptt);
>>>> + if (ret) {
>>>> + pci_err(pdev, "failed to register pmu device, ret = %d", ret);
>>>> + return ret;
>>>> + }
>>>
>>> If this fails the pci_free_irq_vectors() is not called.
>>>
>>
>> It'll be called as we've registered a devm callback when
>> allocating the irq vector. See hisi_ptt_register_irq().
>
> Ah yes - thanks for pointing that out.
>
>>
>>> I am out of time for today - I will continue tomorrow.
>>>
>>
>> Sure. Thanks!
>> Yicong
>>
>>> Thanks,
>>> Mathieu
>>>
>>>> +
>>>> + ret = hisi_ptt_get_rmr(hisi_ptt);
>>>> + if (ret) {
>>>> + pci_err(pdev, "failed to get RMR region, ret = %d", ret);
>>>> + return ret;
>>>> + }
>>>> +
>>>> + /* Register the bus notifier for dynamically updating the filter list */
>>>> + hisi_ptt->hisi_ptt_nb.notifier_call = hisi_ptt_notifier_call;
>>>> + ret = bus_register_notifier(&pci_bus_type, &hisi_ptt->hisi_ptt_nb);
>>>> + if (ret)
>>>> + pci_warn(pdev, "failed to register filter update notifier, ret = %d", ret);
>>>> +
>>>> + return 0;
>>>> +}
>>>> +
>>>> +void hisi_ptt_remove(struct pci_dev *pdev)
>>>> +{
>>>> + struct hisi_ptt *hisi_ptt = pci_get_drvdata(pdev);
>>>> +
>>>> + bus_unregister_notifier(&pci_bus_type, &hisi_ptt->hisi_ptt_nb);
>>>> +
>>>> + /* Cancel any work that has been queued */
>>>> + cancel_delayed_work_sync(&hisi_ptt->work);
>>>> +
>>>> + if (hisi_ptt->trace_ctrl.status == HISI_PTT_TRACE_STATUS_ON)
>>>> + hisi_ptt_trace_end(hisi_ptt);
>>>> +
>>>> + hisi_ptt_free_trace_buf(hisi_ptt);
>>>> + hisi_ptt_release_filters(hisi_ptt);
>>>> +}
>>>> +
>>>> +static const struct pci_device_id hisi_ptt_id_tbl[] = {
>>>> + { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, 0xa12e) },
>>>> + { }
>>>> +};
>>>> +MODULE_DEVICE_TABLE(pci, hisi_ptt_id_tbl);
>>>> +
>>>> +static struct pci_driver hisi_ptt_driver = {
>>>> + .name = "hisi_ptt",
>>>> + .id_table = hisi_ptt_id_tbl,
>>>> + .probe = hisi_ptt_probe,
>>>> + .remove = hisi_ptt_remove,
>>>> +};
>>>> +module_pci_driver(hisi_ptt_driver);
>>>> +
>>>> +MODULE_LICENSE("GPL v2");
>>>> +MODULE_AUTHOR("Yicong Yang <yangyicong at hisilicon.com>");
>>>> +MODULE_DESCRIPTION("Driver for HiSilicon PCIe tune and trace device");
>>>> --
>>>> 2.33.0
>>>>
>>> .
>>>
> .
>
More information about the linux-arm-kernel
mailing list