[PATCH v6 1/3] dt-bindings: mediatek: add adsp-mbox document

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Fri Nov 26 03:36:02 PST 2021


Il 26/11/21 10:30, allen-kh.cheng ha scritto:
> From: Allen-KH Cheng <Allen-KH.Cheng at mediatek.com>
> 
> This patch adds document for mediatek adsp mbox
> 
> Signed-off-by: Allen-KH Cheng <Allen-KH.Cheng at mediatek.com>
> ---
>   .../bindings/mailbox/mtk,adsp-mbox.yaml       | 52 +++++++++++++++++++
>   1 file changed, 52 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
> new file mode 100644
> index 000000000000..a0149566ae56
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/mtk,adsp-mbox.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek ADSP mailbox
> +
> +maintainers:
> +  - Allen-KH Cheng <Allen-KH.Cheng at mediatek.com>
> +
> +description: |
> +  The MTK ADSP mailbox Inter-Processor Communication (IPC) enables the SoC
> +  to ommunicate with ADSP by passing messages through two mailbox channels.
> +  The MTK ADSP mailbox IPC also provides the ability for one processor to
> +  signal the other processor using interrupts.
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: mediatek,mt8195-adsp-mbox
> +
> +  "#mbox-cells":
> +    const: 0
> +
> +  reg:
> +    description:
> +      Physical address base for dsp mbox base registers.
> +
> +  interrupts:
> +    description:
> +      adsp mbox interrupt
> +
> +required:
> +  - compatible
> +  - "#mbox-cells"
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    adsp_mailbox0:adsp_mailbox0 at 10816000 {

This should be:

adsp_mailbox0: mailbox at 10816000 {

> +        compatible = "mediatek,mt8195-adsp-mbox";
> +        #mbox-cells = <0>;
> +        reg = <0x10816000 0x1000>;
> +        interrupts = <GIC_SPI 702 IRQ_TYPE_LEVEL_HIGH 0>;
> +    };
> 

Regards,
- Angelo



More information about the linux-arm-kernel mailing list