[PATCH 08/12] arm64: dts: rockchip: rk356x: Add VOP2 nodes

Sascha Hauer s.hauer at pengutronix.de
Thu Nov 25 23:40:21 PST 2021


On Thu, Nov 25, 2021 at 09:25:28PM +0100, Johan Jonker wrote:
> Hi Sascha,
> 
> 
> On 11/17/21 3:33 PM, Sascha Hauer wrote:
> > The VOP2 is the display output controller on the RK3568. Add the node
> > for it to the dtsi file along with the required display-subsystem node
> > and the iommu node.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
> > ---
> >  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 52 ++++++++++++++++++++++++
> >  1 file changed, 52 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > index 46d9552f60284..6ebf7c14e096a 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > @@ -447,6 +447,58 @@ gmac1_mtl_tx_setup: tx-queues-config {
> >  		};
> >  	};
> >  
> 
> > +	display_subsystem: display-subsystem {
> > +		compatible = "rockchip,display-subsystem";
> > +		ports = <&vop_out>;
> > +	};
> 
> Some DT sort rules:
> 
> For nodes:
> Sort things without reg alphabetical first,
> then sort the rest by reg address.
> 
> > +
> > +	vop: vop at fe040000 {
> 
> > +		compatible = "rockchip,rk3568-vop";
> 
> From rockchip-vop2.yaml:
> +properties:
> +  compatible:
> +    enum:
> 
> +      - rockchip,rk3568-vop
> +      - rockchip,rk3566-vop
> 
> Maybe sort yaml compatibles in alphabetical order.
> 
> rockchip,rk3566-vop is not used in the dtsi I think.
> 
> Comment by Andy Yan:
> > 
> > But take care that the vop on rk3566 has a special limitation: there are 
> > three
> > 
> > windows(Cluster1/Esmart1/Smart1) that have a mirror lock, that means they
> > 
> > can't be programed framebuffer address independently , they can only
> > 
> > share framebuffer address with Cluster0/Esmart0/Smart0.
> 
> Question:
> Given Andy's comment could someone explain weather the vop and hdmi
> nodes should be in rk3566.dtsi and rk3568.dtsi with an extra
> rockchip,rk3566-dw-hdmi compatible?

We could put the vop/hdmi nodes into rk356x.dtsi and just add the
compatible properties to rk3566.dtsi and rk3568.dtsi.
We'll need the exact SoC type, besides the mirror lock thingy there are a
few other minor differences between the SoCs.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the linux-arm-kernel mailing list