[PATCH 1/2] arm64: dts: rockchip: rk356x: Add HDMI audio nodes

Johan Jonker jbx6244 at gmail.com
Thu Nov 25 11:07:21 PST 2021


Hi Nicolas,

Some comments...

On 11/25/21 11:08 AM, Nicolas Frattaroli wrote:
> This adds the i2s0 node and an hdmi-sound sound device to the
> rk356x device tree. On the rk356[68], the i2s0 controller is
> connected to HDMI audio.
> 
> Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas at gmail.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 32 ++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> index 3c09cf6d4c37..ad4053402eef 100644
> --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> @@ -614,6 +614,21 @@ hdmi_in_vp2: endpoint at 2 {
>  		};
>  	};
>  

> +	hdmi_sound: hdmi-sound {

Some DT sort rules:

For nodes:
Sort things without reg alphabetical first,
then sort the rest by reg address.

> +		compatible = "simple-audio-card";

simple-audio-card,name = "HDMI";

> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,mclk-fs = <256>;

> +		simple-audio-card,name = "hdmi-sound";

Exceptions:
Sort simple-audio-card,name above other simple-audio-card properties.

Shouldn't we standardize to SPDIF, HDMI and Analog similar to rk3318/rk3328?
Make a shorter label without spaces or special chars, so that chars
don't get removed?
See "aplay -l" screen print.

Maybe rename to "HDMI"?

> +		status = "disabled";
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&i2s0_8ch>;
> +		};

Add empty line between nodes.

Not sure if Heiko cares, but when alphabetical sort I get this:
simple-audio-card,codec
simple-audio-card,cpu

> +		simple-audio-card,codec {
> +			sound-dai = <&hdmi>;
> +		};
> +	};
> +
>  	qos_gpu: qos at fe128000 {
>  		compatible = "rockchip,rk3568-qos", "syscon";
>  		reg = <0x0 0xfe128000 0x0 0x20>;
> @@ -789,6 +804,23 @@ spdif: spdif at fe460000 {
>  		status = "disabled";
>  	};
>  
> +	i2s0_8ch: i2s at fe400000 {
> +		compatible = "rockchip,rk3568-i2s-tdm";
> +		reg = <0x0 0xfe400000 0x0 0x1000>;
> +		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> +		assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
> +		assigned-clock-rates = <1188000000>, <1188000000>;
> +		clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
> +		clock-names = "mclk_tx", "mclk_rx", "hclk";
> +		dmas = <&dmac1 0>;
> +		dma-names = "tx";
> +		resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
> +		reset-names = "tx-m", "rx-m";
> +		rockchip,grf = <&grf>;
> +		#sound-dai-cells = <0>;
> +		status = "disabled";
> +	};
> +
>  	i2s1_8ch: i2s at fe410000 {
>  		compatible = "rockchip,rk3568-i2s-tdm";
>  		reg = <0x0 0xfe410000 0x0 0x1000>;
> 



More information about the linux-arm-kernel mailing list