[PATCH 2/2] ARM: dts: imx6qdl: Handle unneeded MFD-subdevices correctly

[Andrej Picej]

From: Yunus Bas <y.bas at phytec.de>

The proper way to handle partly used MFD devices are to describe all MFD
subdevices in the devicetree and disable the not used ones. This
suppresses any warnings that may arise as a result.

Signed-off-by: Yunus Bas <y.bas at phytec.de>
Signed-off-by: Andrej Picej <andrej.picej at norik.com>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi      |  5 +++++
 arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 10 ++++++++++
 2 files changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 2ec154756bbc..3590f439adf5 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -213,6 +213,11 @@ pmic_rtc: rtc {
 		da9063_wdog: wdt {
 			compatible = "dlg,da9063-watchdog";
 		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index a80aa08a37cb..972419f20af8 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -113,6 +113,16 @@ watchdog {
 			dlg,use-sw-pm;
 		};
 
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+			status = "disabled";
+		};
+
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
-- 
2.25.1