[PATCH v2 2/6] arm64: dts: xilinx: zynqmp: Add RPU subsystem device node

[Tanmay Shah]

RPU subsystem can be configured in cluster-mode or split mode.
Also each r5 core has separate power domains.

Signed-off-by: Tanmay Shah <tanmay.shah at xilinx.com>
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 28dccb891a53..f4fb98ccb1b5 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -654,6 +654,23 @@ qspi: spi at ff0f0000 {
 			power-domains = <&zynqmp_firmware PD_QSPI>;
 		};
 
+		r5fss: r5fss at ff9a0000 {
+			compatible = "xlnx,zynqmp-r5fss";
+			xlnx,cluster-mode = <1>;
+
+                        reg = <0x0 0Xff9a0000 0x0 0x228>;
+
+			r5f_core0: r5f-0 {
+				compatible = "xlnx,zynqmp-r5f";
+				power-domains = <&zynqmp_firmware PD_RPU_0>;
+			};
+
+			r5f_core1: r5f-1 {
+				compatible = "xlnx,zynqmp-r5f";
+				power-domains = <&zynqmp_firmware PD_RPU_1>;
+			};
+		};
+
 		psgtr: phy at fd400000 {
 			compatible = "xlnx,zynqmp-psgtr-v1.1";
 			status = "disabled";
-- 
2.25.1