[PATCH 1/3] dt-bindings: net: can: add support for Allwinner R40 CAN controller

[Evgeny Boger]

Allwinner R40 (also known as A40i, T3, V40) has a CAN controller. The
controller is the same as in earlier A10 and A20 SoCs, but needs reset
line to be deasserted before use.

This patch Introduces new compatible for R40 CAN controller with
required resets property.

Signed-off-by: Evgeny Boger <boger at wirenboard.com>
---
 .../net/can/allwinner,sun4i-a10-can.yaml      | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
index a95960ee3feb..c93fe9d3ea82 100644
--- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
+++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml
@@ -17,6 +17,7 @@ properties:
           - const: allwinner,sun7i-a20-can
           - const: allwinner,sun4i-a10-can
       - const: allwinner,sun4i-a10-can
+      - const: allwinner,sun8i-r40-can
 
   reg:
     maxItems: 1
@@ -27,6 +28,19 @@ properties:
   clocks:
     maxItems: 1
 
+  resets:
+    maxItems: 1
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: allwinner,sun8i-r40-can
+
+then:
+  required:
+    - resets
+
 required:
   - compatible
   - reg
@@ -47,5 +61,15 @@ examples:
         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
         clocks = <&ccu CLK_APB1_CAN>;
     };
+  - |
+    #define RST_BUS_CAN		68
+    #define CLK_BUS_CAN		91
+    can1: can at 1c2bc00 {
+        compatible = "allwinner,sun8i-r40-can";
+        reg = <0x01c2bc00 0x400>;
+        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&ccu CLK_BUS_CAN>;
+        resets = <&ccu RST_BUS_CAN>;
+    };
 
 ...
-- 
2.25.1