[PATCH v8 08/12] media: hantro: Rename registers
Ezequiel Garcia
ezequiel at vanguardiasur.com.ar
Wed Nov 17 03:02:39 PST 2021
On Tue, Nov 16, 2021 at 03:38:38PM +0100, Andrzej Pietrasiewicz wrote:
> Add more consistency in the way registers are named.
>
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p at collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>
> ---
> .../staging/media/hantro/hantro_g2_hevc_dec.c | 40 +++++++++----------
> drivers/staging/media/hantro/hantro_g2_regs.h | 28 ++++++-------
> 2 files changed, 34 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> index 76a921163b9a..abae36f9b418 100644
> --- a/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> +++ b/drivers/staging/media/hantro/hantro_g2_hevc_dec.c
> @@ -448,9 +448,9 @@ static int set_ref(struct hantro_ctx *ctx)
> if (dpb[i].rps == V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR)
> dpb_longterm_e |= BIT(V4L2_HEVC_DPB_ENTRIES_NUM_MAX - 1 - i);
>
> - hantro_write_addr(vpu, G2_REG_ADDR_REF(i), luma_addr);
> - hantro_write_addr(vpu, G2_REG_CHR_REF(i), chroma_addr);
> - hantro_write_addr(vpu, G2_REG_DMV_REF(i), mv_addr);
> + hantro_write_addr(vpu, G2_REF_LUMA_ADDR(i), luma_addr);
> + hantro_write_addr(vpu, G2_REF_CHROMA_ADDR(i), chroma_addr);
> + hantro_write_addr(vpu, G2_REF_MV_ADDR(i), mv_addr);
> }
>
> luma_addr = hantro_hevc_get_ref_buf(ctx, decode_params->pic_order_cnt_val);
> @@ -460,20 +460,20 @@ static int set_ref(struct hantro_ctx *ctx)
> chroma_addr = luma_addr + cr_offset;
> mv_addr = luma_addr + mv_offset;
>
> - hantro_write_addr(vpu, G2_REG_ADDR_REF(i), luma_addr);
> - hantro_write_addr(vpu, G2_REG_CHR_REF(i), chroma_addr);
> - hantro_write_addr(vpu, G2_REG_DMV_REF(i++), mv_addr);
> + hantro_write_addr(vpu, G2_REF_LUMA_ADDR(i), luma_addr);
> + hantro_write_addr(vpu, G2_REF_CHROMA_ADDR(i), chroma_addr);
> + hantro_write_addr(vpu, G2_REF_MV_ADDR(i++), mv_addr);
>
> - hantro_write_addr(vpu, G2_ADDR_DST, luma_addr);
> - hantro_write_addr(vpu, G2_ADDR_DST_CHR, chroma_addr);
> - hantro_write_addr(vpu, G2_ADDR_DST_MV, mv_addr);
> + hantro_write_addr(vpu, G2_OUT_LUMA_ADDR, luma_addr);
> + hantro_write_addr(vpu, G2_OUT_CHROMA_ADDR, chroma_addr);
> + hantro_write_addr(vpu, G2_OUT_MV_ADDR, mv_addr);
>
> hantro_hevc_ref_remove_unused(ctx);
>
> for (; i < V4L2_HEVC_DPB_ENTRIES_NUM_MAX; i++) {
> - hantro_write_addr(vpu, G2_REG_ADDR_REF(i), 0);
> - hantro_write_addr(vpu, G2_REG_CHR_REF(i), 0);
> - hantro_write_addr(vpu, G2_REG_DMV_REF(i), 0);
> + hantro_write_addr(vpu, G2_REF_LUMA_ADDR(i), 0);
> + hantro_write_addr(vpu, G2_REF_CHROMA_ADDR(i), 0);
> + hantro_write_addr(vpu, G2_REF_MV_ADDR(i), 0);
> }
>
> hantro_reg_write(vpu, &g2_refer_lterm_e, dpb_longterm_e);
> @@ -499,7 +499,7 @@ static void set_buffers(struct hantro_ctx *ctx)
> src_len = vb2_get_plane_payload(&src_buf->vb2_buf, 0);
> src_buf_len = vb2_plane_size(&src_buf->vb2_buf, 0);
>
> - hantro_write_addr(vpu, G2_ADDR_STR, src_dma);
> + hantro_write_addr(vpu, G2_STREAM_ADDR, src_dma);
> hantro_reg_write(vpu, &g2_stream_len, src_len);
> hantro_reg_write(vpu, &g2_strm_buffer_len, src_buf_len);
> hantro_reg_write(vpu, &g2_strm_start_offset, 0);
> @@ -508,12 +508,12 @@ static void set_buffers(struct hantro_ctx *ctx)
> /* Destination (decoded frame) buffer. */
> dst_dma = hantro_get_dec_buf_addr(ctx, &dst_buf->vb2_buf);
>
> - hantro_write_addr(vpu, G2_RASTER_SCAN, dst_dma);
> - hantro_write_addr(vpu, G2_RASTER_SCAN_CHR, dst_dma + cr_offset);
> - hantro_write_addr(vpu, G2_ADDR_TILE_SIZE, ctx->hevc_dec.tile_sizes.dma);
> - hantro_write_addr(vpu, G2_TILE_FILTER, ctx->hevc_dec.tile_filter.dma);
> - hantro_write_addr(vpu, G2_TILE_SAO, ctx->hevc_dec.tile_sao.dma);
> - hantro_write_addr(vpu, G2_TILE_BSD, ctx->hevc_dec.tile_bsd.dma);
> + hantro_write_addr(vpu, G2_RS_OUT_LUMA_ADDR, dst_dma);
> + hantro_write_addr(vpu, G2_RS_OUT_CHROMA_ADDR, dst_dma + cr_offset);
> + hantro_write_addr(vpu, G2_TILE_SIZES_ADDR, ctx->hevc_dec.tile_sizes.dma);
> + hantro_write_addr(vpu, G2_TILE_FILTER_ADDR, ctx->hevc_dec.tile_filter.dma);
> + hantro_write_addr(vpu, G2_TILE_SAO_ADDR, ctx->hevc_dec.tile_sao.dma);
> + hantro_write_addr(vpu, G2_TILE_BSD_ADDR, ctx->hevc_dec.tile_bsd.dma);
> }
>
> static void prepare_scaling_list_buffer(struct hantro_ctx *ctx)
> @@ -563,7 +563,7 @@ static void prepare_scaling_list_buffer(struct hantro_ctx *ctx)
> for (k = 0; k < 8; k++)
> *p++ = sc->scaling_list_32x32[i][8 * k + j];
>
> - hantro_write_addr(vpu, HEVC_SCALING_LIST, ctx->hevc_dec.scaling_lists.dma);
> + hantro_write_addr(vpu, G2_HEVC_SCALING_LIST_ADDR, ctx->hevc_dec.scaling_lists.dma);
> }
>
> static void hantro_g2_check_idle(struct hantro_dev *vpu)
> diff --git a/drivers/staging/media/hantro/hantro_g2_regs.h b/drivers/staging/media/hantro/hantro_g2_regs.h
> index bb22fa921914..24b18f839ff8 100644
> --- a/drivers/staging/media/hantro/hantro_g2_regs.h
> +++ b/drivers/staging/media/hantro/hantro_g2_regs.h
> @@ -177,20 +177,20 @@
> #define G2_REG_CONFIG_DEC_CLK_GATE_E BIT(16)
> #define G2_REG_CONFIG_DEC_CLK_GATE_IDLE_E BIT(17)
>
> -#define G2_ADDR_DST (G2_SWREG(65))
> -#define G2_REG_ADDR_REF(i) (G2_SWREG(67) + ((i) * 0x8))
> -#define G2_ADDR_DST_CHR (G2_SWREG(99))
> -#define G2_REG_CHR_REF(i) (G2_SWREG(101) + ((i) * 0x8))
> -#define G2_ADDR_DST_MV (G2_SWREG(133))
> -#define G2_REG_DMV_REF(i) (G2_SWREG(135) + ((i) * 0x8))
> -#define G2_ADDR_TILE_SIZE (G2_SWREG(167))
> -#define G2_ADDR_STR (G2_SWREG(169))
> -#define HEVC_SCALING_LIST (G2_SWREG(171))
> -#define G2_RASTER_SCAN (G2_SWREG(175))
> -#define G2_RASTER_SCAN_CHR (G2_SWREG(177))
> -#define G2_TILE_FILTER (G2_SWREG(179))
> -#define G2_TILE_SAO (G2_SWREG(181))
> -#define G2_TILE_BSD (G2_SWREG(183))
> +#define G2_OUT_LUMA_ADDR (G2_SWREG(65))
> +#define G2_REF_LUMA_ADDR(i) (G2_SWREG(67) + ((i) * 0x8))
> +#define G2_OUT_CHROMA_ADDR (G2_SWREG(99))
> +#define G2_REF_CHROMA_ADDR(i) (G2_SWREG(101) + ((i) * 0x8))
> +#define G2_OUT_MV_ADDR (G2_SWREG(133))
> +#define G2_REF_MV_ADDR(i) (G2_SWREG(135) + ((i) * 0x8))
> +#define G2_TILE_SIZES_ADDR (G2_SWREG(167))
> +#define G2_STREAM_ADDR (G2_SWREG(169))
> +#define G2_HEVC_SCALING_LIST_ADDR (G2_SWREG(171))
> +#define G2_RS_OUT_LUMA_ADDR (G2_SWREG(175))
> +#define G2_RS_OUT_CHROMA_ADDR (G2_SWREG(177))
> +#define G2_TILE_FILTER_ADDR (G2_SWREG(179))
> +#define G2_TILE_SAO_ADDR (G2_SWREG(181))
> +#define G2_TILE_BSD_ADDR (G2_SWREG(183))
>
> #define g2_strm_buffer_len G2_DEC_REG(258, 0, 0xffffffff)
> #define g2_strm_start_offset G2_DEC_REG(259, 0, 0xffffffff)
> --
> 2.25.1
>
More information about the linux-arm-kernel
mailing list