[PATCH 2/3] dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

[Rob Herring]

On Thu, 11 Nov 2021 21:15:56 +0530, Jagan Teki wrote:
> i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
> 
> C.TOUCH 2.0 is a general purpose carrier board with capacitive
> touch interface support.
> 
> 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.
> 
> i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
> pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
> 10.1" Open Frame board.
> 
> Add bindings for it.
> 
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/arm/stm32/stm32.yaml:76:111: [warning] line too long (116 > 110 characters) (line-length)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1553999

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.