[PATCH] drm/exynos: Replace legacy gpio interface for gpiod interface

Inki Dae inki.dae at samsung.com
Tue Nov 9 00:45:04 PST 2021


Hi,

21. 11. 2. 오전 11:20에 Maíra Canal 이(가) 쓴 글:
> Considering the current transition of the GPIO subsystem, remove all
> dependencies of the legacy GPIO interface (linux/gpio.h and linux
> /of_gpio.h) and replace it with the descriptor-based GPIO approach.
> 

Applied.

Thanks,
Inki Dae

> Signed-off-by: Maíra Canal <maira.canal at usp.br>
> ---
>  drivers/gpu/drm/exynos/exynos_drm_dsi.c | 42 +++++++++----------------
>  1 file changed, 14 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 8d137857818c..b0b1acb7e712 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -13,7 +13,6 @@
>  #include <linux/gpio/consumer.h>
>  #include <linux/irq.h>
>  #include <linux/of_device.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_graph.h>
>  #include <linux/phy/phy.h>
>  #include <linux/regulator/consumer.h>
> @@ -265,7 +264,7 @@ struct exynos_dsi {
>  	struct clk **clks;
>  	struct regulator_bulk_data supplies[2];
>  	int irq;
> -	int te_gpio;
> +	struct gpio_desc *te_gpio;
>  
>  	u32 pll_clk_rate;
>  	u32 burst_clk_rate;
> @@ -1298,14 +1297,14 @@ static void exynos_dsi_enable_irq(struct exynos_dsi *dsi)
>  {
>  	enable_irq(dsi->irq);
>  
> -	if (gpio_is_valid(dsi->te_gpio))
> -		enable_irq(gpio_to_irq(dsi->te_gpio));
> +	if (dsi->te_gpio)
> +		enable_irq(gpiod_to_irq(dsi->te_gpio));
>  }
>  
>  static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
>  {
> -	if (gpio_is_valid(dsi->te_gpio))
> -		disable_irq(gpio_to_irq(dsi->te_gpio));
> +	if (dsi->te_gpio)
> +		disable_irq(gpiod_to_irq(dsi->te_gpio));
>  
>  	disable_irq(dsi->irq);
>  }
> @@ -1335,29 +1334,20 @@ static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi,
>  	int ret;
>  	int te_gpio_irq;
>  
> -	dsi->te_gpio = of_get_named_gpio(panel->of_node, "te-gpios", 0);
> -	if (dsi->te_gpio == -ENOENT)
> -		return 0;
> -
> -	if (!gpio_is_valid(dsi->te_gpio)) {
> -		ret = dsi->te_gpio;
> -		dev_err(dsi->dev, "cannot get te-gpios, %d\n", ret);
> +	dsi->te_gpio = devm_gpiod_get_optional(dsi->dev, "te", GPIOD_IN);
> +	if (IS_ERR(dsi->te_gpio)) {
> +		dev_err(dsi->dev, "gpio request failed with %ld\n",
> +				PTR_ERR(dsi->te_gpio));
>  		goto out;
>  	}
>  
> -	ret = gpio_request(dsi->te_gpio, "te_gpio");
> -	if (ret) {
> -		dev_err(dsi->dev, "gpio request failed with %d\n", ret);
> -		goto out;
> -	}
> -
> -	te_gpio_irq = gpio_to_irq(dsi->te_gpio);
> +	te_gpio_irq = gpiod_to_irq(dsi->te_gpio);
>  
>  	ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
>  				   IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN, "TE", dsi);
>  	if (ret) {
>  		dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
> -		gpio_free(dsi->te_gpio);
> +		gpiod_put(dsi->te_gpio);
>  		goto out;
>  	}
>  
> @@ -1367,10 +1357,9 @@ static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi,
>  
>  static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
>  {
> -	if (gpio_is_valid(dsi->te_gpio)) {
> -		free_irq(gpio_to_irq(dsi->te_gpio), dsi);
> -		gpio_free(dsi->te_gpio);
> -		dsi->te_gpio = -ENOENT;
> +	if (dsi->te_gpio) {
> +		free_irq(gpiod_to_irq(dsi->te_gpio), dsi);
> +		gpiod_put(dsi->te_gpio);
>  	}
>  }
>  
> @@ -1745,9 +1734,6 @@ static int exynos_dsi_probe(struct platform_device *pdev)
>  	if (!dsi)
>  		return -ENOMEM;
>  
> -	/* To be checked as invalid one */
> -	dsi->te_gpio = -ENOENT;
> -
>  	init_completion(&dsi->completed);
>  	spin_lock_init(&dsi->transfer_lock);
>  	INIT_LIST_HEAD(&dsi->transfer_list);
> 



More information about the linux-arm-kernel mailing list