[RFC V2 5/5] arm64: dts: imx8mm-evk: Enable OV5640 Camera

[Tim Harvey]

On Wed, Oct 27, 2021 at 6:34 PM Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
>
> Hi Adam,
>
> Thank you for the patch.
>
> On Sat, Oct 23, 2021 at 03:34:56PM -0500, Adam Ford wrote:
> > The schematic shows support for a camera interface, and the NXP
> > kernel shows it is an OV5640.
>
> The camera is an external module though. Should this be a DT overlay ?
>

Laurent,

I wanted to ask you about your comment here. I would agree that for
something like the OV5640 on the imx8mm-evk which is an add-in board
via a connector should be a dt overlay. I'm investigating using
overlays for features like this on my boards vs creating hierarchical
dts files and I see that the kernel allows building fragments with
'/plugin/' but I don't see any such overlays in the kernel tree
currently. Would overlay/fragments be accepted? Are there any examples
in the kernel tree already that I'm missing?

Best regards,

Tim