[PATCH v2 2/4] Documentation: DT: bindings: input: Add documentation for cyttsp5

[Rob Herring]

On Wed, 03 Nov 2021 21:48:28 +1000, Alistair Francis wrote:
> From: Mylène Josserand <mylene.josserand at free-electrons.com>
> 
> Add the Cypress TrueTouch Generation 5 touchscreen device tree bindings
> documentation. It can use I2C or SPI bus.
> This touchscreen can handle some defined zone that are designed and
> sent as button. To be able to customize the keycode sent, the
> "linux,code" property in a "button" sub-node can be used.
> 
> Signed-off-by: Mylène Josserand <mylene.josserand at free-electrons.com>
> Message-Id: <20170529144538.29187-3-mylene.josserand at free-electrons.com>
> Signed-off-by: Alistair Francis <alistair at alistair23.me>
> ---
>  .../input/touchscreen/cypress,tt21000.yaml    | 92 +++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/input/touchscreen/cypress,tt21000.yaml#
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:37.26-39.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen at 24/button at 0: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:41.26-43.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen at 24/button at 1: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dts:45.26-47.19: Warning (unit_address_vs_reg): /example-0/i2c/touchscreen at 24/button at 2: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.example.dt.yaml:0:0: /example-0/i2c/touchscreen at 24: failed to match any schema with compatible: ['cypress,tt2100']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1550218

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.