[PATCHv2 4/4] media: imx: Use dedicated format handler for i.MX7/8

[Dan Carpenter]

On Sun, Oct 17, 2021 at 01:08:37PM +0200, Dorota Czaplejewicz wrote:
> +static int imx78_media_mbus_fmt_to_pix_fmt(struct v4l2_pix_format *pix,
> +					   const struct v4l2_mbus_framefmt *mbus,
> +					   const struct imx_media_pixfmt *cc)
> +{
> +	u32 width;
> +	u32 stride;
> +	u8 divisor;
> +
> +	if (!cc) {
> +		cc = imx_media_find_ipu_format(mbus->code,
> +					       PIXFMT_SEL_YUV_RGB);
> +		if (!cc)
> +			cc = imx_media_find_mbus_format(mbus->code,
> +							PIXFMT_SEL_ANY);
> +		if (!cc)
> +			return -EINVAL;
> +	}
> +
> +	/*
> +	 * TODO: the IPU currently does not support the AYUV32 format,
> +	 * so until it does convert to a supported YUV format.
> +	 */
> +	if (cc->ipufmt && cc->cs == IPUV3_COLORSPACE_YUV) {
> +		u32 code;
> +
> +		imx_media_enum_mbus_formats(&code, 0, PIXFMT_SEL_YUV);
> +		cc = imx_media_find_mbus_format(code, PIXFMT_SEL_YUV);

Do we need a if (!cc) NULL check after this assignment?

> +	}
> +
> +	/*
> +	 * The hardware can handle line lengths divisible by 4 bytes,
> +	 * as long as the number of lines is even.
> +	 * Otherwise, use the value of 8 bytes recommended in the datasheet.
> +	 */
> +	divisor = 4 << (mbus->height % 2);
> +
> +	width = round_up(mbus->width, divisor);
> +
> +	if (cc->planar)
> +		stride = round_up(width, 16);
> +	else
> +		stride = round_up((width * cc->bpp) >> 3, divisor);
> +
> +	pix->width = width;
> +	pix->height = mbus->height;
> +	pix->pixelformat = cc->fourcc;
> +	pix->colorspace = mbus->colorspace;
> +	pix->xfer_func = mbus->xfer_func;
> +	pix->ycbcr_enc = mbus->ycbcr_enc;
> +	pix->quantization = mbus->quantization;
> +	pix->field = mbus->field;
> +	pix->bytesperline = stride;
> +	pix->sizeimage = cc->planar ? ((stride * pix->height * cc->bpp) >> 3) :
> +			 stride * pix->height;
> +
> +	return 0;
> +}

regards,
dan carpenter