[PATCH v5 2/8] dt-bindings: phy: Add imx8 pcie phy driver support

[Richard Zhu]

> -----Original Message-----
> From: Rob Herring <robh at kernel.org>
> Sent: Wednesday, November 3, 2021 12:41 AM
> To: Richard Zhu <hongxing.zhu at nxp.com>
> Cc: l.stach at pengutronix.de; Marcel Ziswiler
> <marcel.ziswiler at toradex.com>; tharvey at gateworks.com;
> kishon at ti.com; vkoul at kernel.org; galak at kernel.crashing.org;
> shawnguo at kernel.org; linux-phy at lists.infradead.org;
> devicetree at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> linux-kernel at vger.kernel.org; kernel at pengutronix.de; dl-linux-imx
> <linux-imx at nxp.com>
> Subject: Re: [PATCH v5 2/8] dt-bindings: phy: Add imx8 pcie phy driver
> support
> 
> On Tue, Nov 02, 2021 at 10:32:29AM +0800, Richard Zhu wrote:
> > Add dt-binding for the standalone i.MX8 PCIe PHY driver.
> >
> > Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
> > Tested-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > Reviewed-by: Tim Harvey <tharvey at gateworks.com>
> > Tested-by: Tim Harvey <tharvey at gateworks.com>
> > ---
> >  .../bindings/phy/fsl,imx8-pcie-phy.yaml       | 95
> +++++++++++++++++++
> >  1 file changed, 95 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
> > b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
> > new file mode 100644
> > index 000000000000..b9f89e343b0b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8-pcie-phy.yaml
> > @@ -0,0 +1,95 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> >
> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fde
> vi
> >
> +cetree.org%2Fschemas%2Fphy%2Ffsl%2Cimx8-pcie-phy.yaml%23&amp
> ;data=04%
> >
> +7C01%7Chongxing.zhu%40nxp.com%7C1364bc88f1f84bac546708d99e1
> f8542%7C68
> >
> +6ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C6377146804867737
> 07%7CUnknown
> >
> +%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik
> 1haWwiLC
> >
> +JXVCI6Mn0%3D%7C1000&sdata=iEptMTlSVOTBuZCQNAKj6dyMFU
> fuBRnSt24nB6h
> > +Z9Lc%3D&reserved=0
> > +$schema:
> >
> +https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fde
> vi
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%
> 7Chongxing.
> >
> +zhu%40nxp.com%7C1364bc88f1f84bac546708d99e1f8542%7C686ea1d
> 3bc2b4c6fa9
> >
> +2cd99c5c301635%7C0%7C0%7C637714680486773707%7CUnknown%7
> CTWFpbGZsb3d8e
> >
> +yJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn
> 0%3D%7C1
> >
> +000&sdata=Q9S%2BP%2B8hliF4led7BdtytbPNzLH5pKLEoMjxhFIeg9
> M%3D&
> > +reserved=0
> > +
> > +title: Freescale i.MX8 SoC series PCIe PHY Device Tree Bindings
> > +
> > +maintainers:
> > +  - Richard Zhu <hongxing.zhu at nxp.com>
> > +
> > +properties:
> > +  "#phy-cells":
> > +    const: 0
> > +
> > +  compatible:
> > +    enum:
> > +      - fsl,imx8mm-pcie-phy
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    items:
> > +      - description: PHY module clock
> 
> The description doesn't really add much. Just 'maxItems: 1'.
[Richard Zhu] Okay, would add maxItems: 1. And remove the original items and
 description. Thanks.
> 
> > +
> > +  clock-names:
> > +    items:
> > +      - const: ref
> > +
> > +  resets:
> > +    items:
> > +      - description: Phandles to PCIe-related reset lines exposed by
> SRC
> > +          IP block.
> 
> More than 1 phandle? The schema says only 1. Again, for only 1, you can
> use just 'maxItems: 1'.
[Richard Zhu] It's just only 1. Okay, the original items and descriptions would
 be replaced by 'maxItems: 1'. Thanks.
> 
> > +
> > +  reset-names:
> > +    items:
> > +      - const: pciephy
> > +
> > +  fsl,refclk-pad-mode:
> > +    description: |
> > +      Specifies the mode of the refclk pad used. It can be
> UNUSED(PHY
> > +      refclock is derived from SoC internal source), INPUT(PHY
> refclock
> > +      is provided externally via the refclk pad) or OUTPUT(PHY
> refclock
> > +      is derived from SoC internal source and provided on the refclk
> pad).
> > +      Refer include/dt-bindings/phy/phy-imx8-pcie.h for the
> constants
> > +      to be used.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    enum: [ 0, 1, 2 ]
> > +
> > +  fsl,tx-deemph-gen1:
> > +    description: Gen1 De-emphasis value (optional required).
> 
> Optional or required?
[Richard Zhu] It's optional. Would simple it and below later. Thanks.

> 
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    default: 0
> > +
> > +  fsl,tx-deemph-gen2:
> > +    description: Gen2 De-emphasis value (optional required).
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    default: 0
> > +
> > +  fsl,clkreq-unsupported:
> > +    type: boolean
> > +    description: A boolean property indicating the CLKREQ# signal is
> > +      not supported in the board design (optional)
> > +
> > +required:
> > +  - "#phy-cells"
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - fsl,refclk-pad-mode
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/imx8mm-clock.h>
> > +    #include <dt-bindings/phy/phy-imx8-pcie.h>
> > +    #include <dt-bindings/reset/imx8mq-reset.h>
> > +
> > +    pcie_phy: pcie-phy at 32f00000 {
> > +            compatible = "fsl,imx8mm-pcie-phy";
> > +            reg = <0x32f00000 0x10000>;
> > +            clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
> > +            clock-names = "ref";
> > +            assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
> > +            assigned-clock-rates = <100000000>;
> > +            assigned-clock-parents = <&clk
> IMX8MM_SYS_PLL2_100M>;
> > +            resets = <&src IMX8MQ_RESET_PCIEPHY>;
> > +            reset-names = "pciephy";
> > +            fsl,refclk-pad-mode =
> <IMX8_PCIE_REFCLK_PAD_INPUT>;
> > +            #phy-cells = <0>;
> > +    };
> > +...
> > --
> > 2.25.1
> >
> >