[PATCH 0/7] Fix wrong static ip autoconf in some dts and defconfig

Giulio Benetti giulio.benetti at benettiengineering.com
Tue Nov 2 16:54:49 PDT 2021


While trying to have a working nfsroot through RNDIS on sunxi I've found
that in bootargs <autoconf> must be set to 'off' to use a static ip setup,
but I've also found that the following boards have it set to 'on' that is
not the <autoconf> setting for static ip as stated here:
https://www.kernel.org/doc/Documentation/filesystems/nfs/nfsroot.txt

And most of all on sunxi RNDIS it doesn't work as static ip nfsroot.

Unfortunately I don't have such boards to give a build and a test, so if
there is someone who could give a try it would be great.

Best regards
---
Giulio Benetti
Benetti Engineering sas

Giulio Benetti (7):
  ARM: dts: mmp2-brownstone: fix wrong static ip autoconf
  ARM: dts: pxa168-aspenite: fix wrong static ip autoconf
  ARM: dts: pxa910-dkb: fix wrong static ip autoconf
  ARM: mmp2: update mmp2_defconfig to fix wrong static ip autoconf
  ARM: pxa168: update pxa168_defconfig to fix wrong static ip autoconf
  ARM: pxa3xx: update pxa3xx_defconfig to fix wrong static ip autoconf
  ARM: pxa910: update pxa910_defconfig to fix wrong static ip autoconf

 arch/arm/boot/dts/mmp2-brownstone.dts | 2 +-
 arch/arm/boot/dts/pxa168-aspenite.dts | 2 +-
 arch/arm/boot/dts/pxa910-dkb.dts      | 2 +-
 arch/arm/configs/mmp2_defconfig       | 2 +-
 arch/arm/configs/pxa168_defconfig     | 2 +-
 arch/arm/configs/pxa3xx_defconfig     | 2 +-
 arch/arm/configs/pxa910_defconfig     | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)

-- 
2.25.1




More information about the linux-arm-kernel mailing list