[PATCH 05/10] media: hantro: add support for Rockchip RK3036

Alex Bee knaerzche at gmail.com
Wed May 26 16:27:59 PDT 2021


Hi Ezequiel,

Am 26.05.21 um 12:28 schrieb Ezequiel Garcia:
> Hi Alex,
>
> Thanks a lot for the patch.
>
> On Tue, 2021-05-25 at 17:22 +0200, Alex Bee wrote:
>> RK3036's VPU IP block is the same as RK3288 has, except that it doesn't
>> have an encoder, decoding is supported up to 1920x1088 only and the axi
>> clock can be set to 300 MHz max.
>>
>> Add a new RK3036 variant which reflect this differences.
>>
>> Signed-off-by: Alex Bee <knaerzche at gmail.com>
>> ---
>>   drivers/staging/media/hantro/hantro_drv.c    |  1 +
>>   drivers/staging/media/hantro/hantro_hw.h     |  1 +
>>   drivers/staging/media/hantro/rk3288_vpu_hw.c | 49 ++++++++++++++++++++
>>   3 files changed, 51 insertions(+)
>>
>> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
>> index 38ea7b24036e..4f3c08e85bb8 100644
>> --- a/drivers/staging/media/hantro/hantro_drv.c
>> +++ b/drivers/staging/media/hantro/hantro_drv.c
>> @@ -490,6 +490,7 @@ static const struct of_device_id of_hantro_match[] = {
>>          { .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
>>          { .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
>>          { .compatible = "rockchip,rk3066-vpu", .data = &rk3066_vpu_variant, },
>> +       { .compatible = "rockchip,rk3036-vpu", .data = &rk3036_vpu_variant, },
>>   #endif
>>   #ifdef CONFIG_VIDEO_HANTRO_IMX8M
>>          { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
>> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
>> index de2bc367a15a..d8d6b0d3c3b3 100644
>> --- a/drivers/staging/media/hantro/hantro_hw.h
>> +++ b/drivers/staging/media/hantro/hantro_hw.h
>> @@ -164,6 +164,7 @@ extern const struct hantro_variant rk3399_vpu_variant;
>>   extern const struct hantro_variant rk3328_vpu_variant;
>>   extern const struct hantro_variant rk3288_vpu_variant;
>>   extern const struct hantro_variant rk3066_vpu_variant;
>> +extern const struct hantro_variant rk3036_vpu_variant;
>>   extern const struct hantro_variant imx8mq_vpu_variant;
>>   extern const struct hantro_variant sama5d4_vdec_variant;
>>   
>> diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
>> index 29805c4bd92f..c4684df4e012 100644
>> --- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
>> +++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
>> @@ -174,6 +174,13 @@ static irqreturn_t rk3288_vepu_irq(int irq, void *dev_id)
>>          return IRQ_HANDLED;
>>   }
>>   
>> +static int rk3036_vpu_hw_init(struct hantro_dev *vpu)
>> +{
>> +       /* Bump ACLKs to max. possible freq. to improve performance. */
>> +       clk_set_rate(vpu->clocks[0].clk, RK3066_ACLK_MAX_FREQ);
>> +       return 0;
>> +}
>> +
>>   static int rk3066_vpu_hw_init(struct hantro_dev *vpu)
>>   {
>>          /* Bump ACLKs to max. possible freq. to improve performance. */
>> @@ -209,6 +216,27 @@ static void rk3288_vpu_enc_reset(struct hantro_ctx *ctx)
>>   /*
>>    * Supported codec ops.
>>    */
>> +static const struct hantro_codec_ops rk3036_vpu_codec_ops[] = {
>> +       [HANTRO_MODE_H264_DEC] = {
>> +               .run = hantro_g1_h264_dec_run,
>> +               .reset = hantro_g1_reset,
>> +               .init = hantro_h264_dec_init,
>> +               .exit = hantro_h264_dec_exit,
>> +       },
>> +       [HANTRO_MODE_MPEG2_DEC] = {
>> +               .run = hantro_g1_mpeg2_dec_run,
>> +               .reset = hantro_g1_reset,
>> +               .init = hantro_mpeg2_dec_init,
>> +               .exit = hantro_mpeg2_dec_exit,
>> +       },
>> +       [HANTRO_MODE_VP8_DEC] = {
>> +               .run = hantro_g1_vp8_dec_run,
>> +               .reset = hantro_g1_reset,
>> +               .init = hantro_vp8_dec_init,
>> +               .exit = hantro_vp8_dec_exit,
>> +       },
>> +};
>> +
>>   static const struct hantro_codec_ops rk3066_vpu_codec_ops[] = {
>>          [HANTRO_MODE_JPEG_ENC] = {
>>                  .run = hantro_h1_jpeg_enc_run,
>> @@ -269,6 +297,10 @@ static const struct hantro_codec_ops rk3288_vpu_codec_ops[] = {
>>    * VPU variant.
>>    */
>>   
>> +static const struct hantro_irq rk3036_irqs[] = {
>> +       { "vdpu", hantro_g1_irq },
>> +};
>> +
>>   static const struct hantro_irq rk3288_irqs[] = {
>>          { "vepu", rk3288_vepu_irq },
>>          { "vdpu", hantro_g1_irq },
>> @@ -283,6 +315,23 @@ static const char * const rk3288_clk_names[] = {
>>          "aclk", "hclk"
>>   };
>>   
>> +const struct hantro_variant rk3036_vpu_variant = {
>> +       .dec_offset = 0x400,
> If it doesn't have an encoder, then you should just
> use dec_offset = 0x0.
>
> Thanks,
> Ezequiel
>
That would mean, I'd have to adapt the register offset in the device 
tree - I'd prefer to keep it in line with the TRM. Unless you insist, 
I'd like to keep it this way (It's , btw, the very same for RK3328).

Alex




More information about the linux-arm-kernel mailing list