[PATCHv3 0/3] Support for GE B1x5v2 and B1x5Pv2

Sebastian Reichel sebastian.reichel at collabora.com
Wed May 26 08:22:40 PDT 2021


Hi,

This series adds support for another General Electric patient
monitor series (similar to existing Bx50v3), which is based on
i.MX6DL using Congatec's QMX6 module.

This series has a runtime dependency on two commits, that have
already been merged to linux-next:

1. Any imx6dl-qmx6 based boards without f765e349c3e1 ("rtc: m41t80:
   add support for fixed clock") and CONFIG_RTC_DRV_M41T80 enabled
   will result in unstable system. Because the kernel will disable
   one of the CPU clocks.

2. Booting B155(P)v2 additionally requires 94dfec48fca7 ("drm/imx:
   Add 8 pixel alignment fix") to avoid boot hanging indefinitely.

Changes since PATCHv2:
 * https://lore.kernel.org/lkml/20210428222953.235280-1-sebastian.reichel@collabora.com/
 * Add Acked-by from Rob Herring to patch DT binding patches
 * Drop RTC and DRM patch (applied)
 * order DT Makefile entries alphabetically
 * order DT nodes alphabetically
 * Remove a couple of superfluous status = 'okay';
 * Move compatible property to start of nodes
 * Move status property to end of nodes (but before sub-nodes)
 * Drop useless fsl,spi-num-chipselects property
 * Update pinctrl config for audio pins fixing noise issue affecting some boards
 * rebased to v5.13-rc1

Changes since PATCHv1:
 * https://lore.kernel.org/lkml/20210222171247.97609-1-sebastian.reichel@collabora.com/
 * drop patch 5 (applied)
 * instead of using 'protected-clocks' in RTC node, add fixed-clock
   node as suggested by Saravana Kannan
 * rebased to current master (68a32ba14177)

Thanks,

-- Sebastian

Sebastian Reichel (3):
  dt-bindings: vendor-prefixes: add congatec
  dt-bindings: arm: fsl: add GE B1x5pv2 boards
  ARM: dts: imx6: Add GE B1x5v2

 .../devicetree/bindings/arm/fsl.yaml          |  11 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   5 +
 arch/arm/boot/dts/imx6dl-b105pv2.dts          |  32 +
 arch/arm/boot/dts/imx6dl-b105v2.dts           |  32 +
 arch/arm/boot/dts/imx6dl-b125pv2.dts          |  30 +
 arch/arm/boot/dts/imx6dl-b125v2.dts           |  30 +
 arch/arm/boot/dts/imx6dl-b155v2.dts           |  32 +
 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi         | 413 ++++++++++++
 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi          |  58 ++
 arch/arm/boot/dts/imx6dl-qmx6.dtsi            | 612 ++++++++++++++++++
 11 files changed, 1257 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-b105pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b105v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125pv2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b125v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b155v2.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
 create mode 100644 arch/arm/boot/dts/imx6dl-qmx6.dtsi

-- 
2.30.2




More information about the linux-arm-kernel mailing list