[PATCH 09/10] ARM: dts: rockchip: add vdec node for RK322x

Alex Bee knaerzche at gmail.com
Tue May 25 08:22:24 PDT 2021


The vdec IP block of RK322x is the same as RK3399 has and the driver can
be used as-is.

Add the respective node to the device tree.

Note: core and cabac clock need to be set to a specific rate which is
done by using "assigned-clocks" / "assigned-clock-rates" properties
(axi clock rate is currently set in the driver).

Signed-off-by: Alex Bee <knaerzche at gmail.com>
---
 arch/arm/boot/dts/rk322x.dtsi | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 62d1113b7804..13c2f92ac013 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -633,6 +633,19 @@ vpu_mmu: iommu at 20020800 {
 		#iommu-cells = <0>;
 	};
 
+	vdec: video-codec at 20030000 {
+		compatible = "rockchip,rk3228-vdec", "rockchip,rk3399-vdec";
+		reg = <0x20030000 0x480>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RKVDEC>, <&cru HCLK_RKVDEC>,
+			 <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+		clock-names = "axi", "ahb", "cabac", "core";
+		assigned-clocks = <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>;
+		assigned-clock-rates = <300000000>, <300000000>;
+		power-domains = <&power RK3228_PD_RKVDEC>;
+		iommus = <&vdec_mmu>;
+	};
+
 	vdec_mmu: iommu at 20030480 {
 		compatible = "rockchip,iommu";
 		reg = <0x20030480 0x40>, <0x200304c0 0x40>;
@@ -641,7 +654,6 @@ vdec_mmu: iommu at 20030480 {
 		clock-names = "aclk", "iface";
 		power-domains = <&power RK3228_PD_RKVDEC>;
 		#iommu-cells = <0>;
-		status = "disabled";
 	};
 
 	vop: vop at 20050000 {
-- 
2.27.0




More information about the linux-arm-kernel mailing list