[PATCH V6 0/4] soc: imx: add i.MX BLK-CTL support

[Adam Ford]

On Mon, May 24, 2021 at 2:29 PM Adam Ford <aford173 at gmail.com> wrote:
>
> On Sat, May 22, 2021 at 8:10 AM Peng Fan (OSS) <peng.fan at oss.nxp.com> wrote:
> >
> > From: Peng Fan <peng.fan at nxp.com>
> >
> > V6:
> >  Thanks for Adam's report on V5.
> >  Resolve the error message dump, it is the child device reuse
> >  the parent device node and matches the parent driver.
> >  Filled the remove function for child device.
> >  A diff dts file for upstream:
> >  https://gist.github.com/MrVan/d73888d8273c43ea4a3b28fa668ca1d0
>
Peng,

> Since Shawn has merged the pgc portion [1], can you post the device
> tree to the mailing list, so he can pull that in too? Without the DT,
> the PGC's won't do anything.

On that note, you may want to double check the VPU power domain nodes.
I think they should be:

vpumix_pd: power-domain at 6
vpu_g1_pd: power-domain at 7
vpu_g2_pd: power-domain at 8
vpu_h1_pd: power-domain at 9

> If you want me to do it, can I do it, but you've done all the work.
>
> [1] - https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/log/?h=for-next
>
> thanks
>
> adam
>
> >
> > V5:
> >  Rework the blk-ctl driver to let sub-PGC use blk-ctl as parent power
> >  domain to fix the potential handshake issue.
> >  I still keep R-b/A-b tag for Patch 1,2,4, since very minor changes
> >  I only drop R-b tag for Patch 3, since it has big change.
> >  An example, the pgc_mipi not take pgc_dispmix as parent:
> >
> >         pgc_dispmix: power-domain at 10 {
> >                 #power-domain-cells = <0>;
> >                 reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
> >                 clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
> >                          <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> >                          <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> >         };
> >
> >         pgc_mipi: power-domain at 11 {
> >                 #power-domain-cells = <0>;
> >                 reg = <IMX8MM_POWER_DOMAIN_MIPI>;
> >                 power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_BUS>;
> >         };
> >
> >         dispmix_blk_ctl: clock-controller at 32e28000 {
> >                 compatible = "fsl,imx8mm-dispmix-blk-ctl", "syscon";
> >                 reg = <0x32e28000 0x100>;
> >                 #power-domain-cells = <1>;
> >                 power-domains = <&pgc_dispmix>, <&pgc_mipi>;
> >                 power-domain-names = "dispmix", "mipi";
> >                 clocks = <&clk IMX8MM_CLK_DISP_ROOT>, <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
> >                          <&clk IMX8MM_CLK_DISP_APB_ROOT>;
> >         };
> >
> > V4:
> >  Add R-b tag
> >  Typo fix
> >  Update the power domain macro names Per Abel and Frieder
> >
> > V3:
> >  Add explaination for not listing items in patch 2 commit log Per Rob.
> >  Addressed comments from Lucas and Frieder on patch [3,4].
> >  A few comments from Jacky was ignored, because following gpcv2
> >  coding style.
> >
> > V2:
> >  Fix yaml check failure.
> >
> > Previously there is an effort from Abel that take BLK-CTL as clock
> > provider, but it turns out that there is A/B lock issue and we are
> > not able resolve that.
> >
> > Per discuss with Lucas and Jacky, we made an agreement that take BLK-CTL
> > as a power domain provider and use GPC's domain as parent, the consumer
> > node take BLK-CTL as power domain input.
> >
> > This patchset has been tested on i.MX8MM EVK board, but one hack
> > is not included in the patchset is that the DISPMIX BLK-CTL
> > MIPI_M/S_RESET not implemented. Per Lucas, we will finally have a MIPI
> > DPHY driver, so fine to leave it.
> >
> > Thanks for Lucas's suggestion, Frieder Schrempf for collecting
> > all the patches, Abel's previous BLK-CTL work, Jacky Bai on help
> > debug issues.
> >
> >
> > Peng Fan (4):
> >   dt-bindings: power: Add defines for i.MX8MM BLK-CTL power domains
> >   Documentation: bindings: clk: Add bindings for i.MX BLK_CTL
> >   soc: imx: Add generic blk-ctl driver
> >   soc: imx: Add blk-ctl driver for i.MX8MM
> >
> >  .../bindings/soc/imx/fsl,imx-blk-ctl.yaml     |  66 ++++
> >  drivers/soc/imx/Makefile                      |   2 +-
> >  drivers/soc/imx/blk-ctl-imx8mm.c              | 139 ++++++++
> >  drivers/soc/imx/blk-ctl.c                     | 334 ++++++++++++++++++
> >  drivers/soc/imx/blk-ctl.h                     |  85 +++++
> >  include/dt-bindings/power/imx8mm-power.h      |  13 +
> >  6 files changed, 638 insertions(+), 1 deletion(-)
> >  create mode 100644 Documentation/devicetree/bindings/soc/imx/fsl,imx-blk-ctl.yaml
> >  create mode 100644 drivers/soc/imx/blk-ctl-imx8mm.c
> >  create mode 100644 drivers/soc/imx/blk-ctl.c
> >  create mode 100644 drivers/soc/imx/blk-ctl.h
> >
> > --
> > 2.30.0
> >