[PATCH v13 2/2] arm64: dts: imx: Add jpeg encoder/decoder nodes
Mirela Rabulea
mirela.rabulea at nxp.com
Mon May 24 00:17:07 PDT 2021
Hi Aisheng, Ezequiel,
On Mon, 2021-05-24 at 03:28 +0000, Aisheng Dong wrote:
> > From: Mirela Rabulea (OSS) <mirela.rabulea at oss.nxp.com>
> > Sent: Sunday, May 23, 2021 5:11 AM
> > Subject: [PATCH v13 2/2] arm64: dts: imx: Add jpeg encoder/decoder
> > nodes
> >
>
> s/imx/imx8
Ok, I'll use imx8 in patch subject.
>
> >
> > Add dts for imaging subsytem, include jpeg nodes here.
> > Tested on imx8qxp/qm.
> >
> > Signed-off-by: Mirela Rabulea <mirela.rabulea at nxp.com>
> > ---
> > Changes in v13:
> > Adress feedback from Aisheng Dong and update the commit message:
> > - Move jpeg compatibles from imx8-ss-img.dtsi to imx8qxp-ss-
> > img.dtsi
> > - Add imx8qm-ss-img.dtsi for i.MX8QM
> >
> > .../arm64/boot/dts/freescale/imx8-ss-img.dtsi | 80
> > +++++++++++++++++++
> > .../boot/dts/freescale/imx8qm-ss-img.dtsi | 12 +++
> > arch/arm64/boot/dts/freescale/imx8qm.dtsi | 2 +
> > .../boot/dts/freescale/imx8qxp-ss-img.dtsi | 13 +++
> > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 2 +
> > 5 files changed, 109 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-
> > img.dtsi
> > create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-
> > img.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > new file mode 100644
> > index 000000000000..4b8456bb4712
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
> > @@ -0,0 +1,80 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2019-2021 NXP
> > + * Zhou Guoniu <guoniu.zhou at nxp.com>
> > + */
> > +img_subsys: bus at 58000000 {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x58000000 0x0 0x58000000 0x1000000>;
> > +
> > + img_ipg_clk: clock-img-ipg {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <200000000>;
> > + clock-output-names = "img_ipg_clk";
> > + };
> > +
> > + jpegdec: jpegdec at 58400000 {
>
> Node should be disabled by default.
> And enable it in board dts including LPCG.
At version v5 of this patch, the node was disabled by default, and I
received this feedback from Ezequiel Garcia:
"Pure memory-to-memory are typically not enabled per-board, but just
per-platform.
So you can drop the disabled status here."
So, in v6 I made it enabled by default.
Any strong reasons for enabled/disabled per platform?
Thanks,
Mirela
>
> > + reg = <0x58400000 0x00050000 >;
> > + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
> > + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
> > + clock-names = "per", "ipg";
> > + assigned-clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>,
> > + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>;
> > + assigned-clock-rates = <200000000>, <200000000>;
> > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
> > + <&pd IMX_SC_R_MJPEG_DEC_S0>,
> > + <&pd IMX_SC_R_MJPEG_DEC_S1>,
> > + <&pd IMX_SC_R_MJPEG_DEC_S2>,
> > + <&pd IMX_SC_R_MJPEG_DEC_S3>;
> > + };
> > +
> > + jpegenc: jpegenc at 58450000 {
>
> Ditto
>
> > + reg = <0x58450000 0x00050000 >;
> > + interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
> > + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
> > + clock-names = "per", "ipg";
> > + assigned-clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>,
> > + <&img_jpeg_enc_lpcg IMX_LPCG_CLK_4>;
> > + assigned-clock-rates = <200000000>, <200000000>;
> > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
> > + <&pd IMX_SC_R_MJPEG_ENC_S0>,
> > + <&pd IMX_SC_R_MJPEG_ENC_S1>,
> > + <&pd IMX_SC_R_MJPEG_ENC_S2>,
> > + <&pd IMX_SC_R_MJPEG_ENC_S3>;
> > + };
> > +
> > + img_jpeg_dec_lpcg: clock-controller at 585d0000 {
>
> Ditto
>
> > + compatible = "fsl,imx8qxp-lpcg";
> > + reg = <0x585d0000 0x10000>;
> > + #clock-cells = <1>;
> > + clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> > + clock-indices = <IMX_LPCG_CLK_0>,
> > + <IMX_LPCG_CLK_4>;
> > + clock-output-names = "img_jpeg_dec_lpcg_clk",
> > + "img_jpeg_dec_lpcg_ipg_clk";
> > + power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>;
> > + };
> > +
> > + img_jpeg_enc_lpcg: clock-controller at 585f0000 {
> > + compatible = "fsl,imx8qxp-lpcg";
>
> Ditto
>
> Otherwise, I'm fine with this patch.
>
> > + reg = <0x585f0000 0x10000>;
> > + #clock-cells = <1>;
> > + clocks = <&img_ipg_clk>, <&img_ipg_clk>;
> > + clock-indices = <IMX_LPCG_CLK_0>,
> > + <IMX_LPCG_CLK_4>;
> > + clock-output-names = "img_jpeg_enc_lpcg_clk",
> > + "img_jpeg_enc_lpcg_ipg_clk";
> > + power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>;
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
> > new file mode 100644
> > index 000000000000..7764b4146e0a
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-img.dtsi
> > @@ -0,0 +1,12 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2021 NXP
> > + */
> > +
> > +&jpegdec {
> > + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgdec"; };
> > +
> > +&jpegenc {
> > + compatible = "nxp,imx8qm-jpgdec", "nxp,imx8qxp-jpgenc"; };
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > index 12cd059b339b..aebbe2b84aa1 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
> > @@ -166,11 +166,13 @@
> > };
> >
> > /* sorted in register address */
> > + #include "imx8-ss-img.dtsi"
> > #include "imx8-ss-dma.dtsi"
> > #include "imx8-ss-conn.dtsi"
> > #include "imx8-ss-lsio.dtsi"
> > };
> >
> > +#include "imx8qm-ss-img.dtsi"
> > #include "imx8qm-ss-dma.dtsi"
> > #include "imx8qm-ss-conn.dtsi"
> > #include "imx8qm-ss-lsio.dtsi"
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
> > new file mode 100644
> > index 000000000000..3a087317591d
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
> > @@ -0,0 +1,13 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright 2021 NXP
> > + * Dong Aisheng <aisheng.dong at nxp.com>
> > + */
> > +
> > +&jpegdec {
> > + compatible = "nxp,imx8qxp-jpgdec";
> > +};
> > +
> > +&jpegenc {
> > + compatible = "nxp,imx8qxp-jpgenc";
> > +};
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > index 1e6b4995091e..a625fb6bdc62 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> > @@ -258,12 +258,14 @@
> > };
> >
> > /* sorted in register address */
> > + #include "imx8-ss-img.dtsi"
> > #include "imx8-ss-adma.dtsi"
> > #include "imx8-ss-conn.dtsi"
> > #include "imx8-ss-ddr.dtsi"
> > #include "imx8-ss-lsio.dtsi"
> > };
> >
> > +#include "imx8qxp-ss-img.dtsi"
> > #include "imx8qxp-ss-adma.dtsi"
> > #include "imx8qxp-ss-conn.dtsi"
> > #include "imx8qxp-ss-lsio.dtsi"
> > --
> > 2.17.1
>
>
More information about the linux-arm-kernel
mailing list