[PATCH v6 2/4] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml

Johan Jonker jbx6244 at gmail.com
Tue May 18 09:56:56 PDT 2021


The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications. Remove unneeded "#phy-cells" from parent node.
Also sort example.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml

Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
 .../devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml       | 11 +++--------
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml       |  4 ++--
 2 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
index fb29ad807..fbe860fff 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml
@@ -29,9 +29,6 @@ properties:
   "#clock-cells":
     const: 0
 
-  "#phy-cells":
-    const: 0
-
   clocks:
     maxItems: 1
 
@@ -119,7 +116,6 @@ required:
   - reg
   - clock-output-names
   - "#clock-cells"
-  - "#phy-cells"
   - host-port
   - otg-port
 
@@ -130,26 +126,25 @@ examples:
     #include <dt-bindings/clock/rk3399-cru.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    u2phy0: usb2-phy at e450 {
+    u2phy0: usb2phy at e450 {
       compatible = "rockchip,rk3399-usb2phy";
       reg = <0xe450 0x10>;
       clocks = <&cru SCLK_USB2PHY0_REF>;
       clock-names = "phyclk";
       clock-output-names = "clk_usbphy0_480m";
       #clock-cells = <0>;
-      #phy-cells = <0>;
 
       u2phy0_host: host-port {
-        #phy-cells = <0>;
         interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
         interrupt-names = "linestate";
+        #phy-cells = <0>;
       };
 
       u2phy0_otg: otg-port {
-        #phy-cells = <0>;
         interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
         interrupt-names = "otg-bvalid", "otg-id", "linestate";
+        #phy-cells = <0>;
       };
     };
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index 84bdaf88d..43c288708 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -184,7 +184,7 @@ allOf:
         - "#size-cells"
 
       patternProperties:
-        "usb2-phy@[0-9a-f]+$":
+        "usb2phy@[0-9a-f]+$":
           type: object
 
           $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
@@ -233,7 +233,7 @@ examples:
         #phy-cells = <0>;
       };
 
-      u2phy0: usb2-phy at e450 {
+      u2phy0: usb2phy at e450 {
         compatible = "rockchip,rk3399-usb2phy";
         reg = <0xe450 0x10>;
         clocks = <&cru SCLK_USB2PHY0_REF>;
-- 
2.11.0




More information about the linux-arm-kernel mailing list