[PATCH net-next 2/2] net: stmmac: Add callbacks for DWC xpcs Energy Efficient Ethernet

Russell King (Oracle) linux at armlinux.org.uk
Tue May 18 03:06:27 PDT 2021


On Mon, May 17, 2021 at 11:37:12AM +0000, Sit, Michael Wei Hong wrote:
> > From: Russell King <linux at armlinux.org.uk>
> > 
> > On Mon, May 17, 2021 at 05:43:32PM +0800, Michael Sit Wei Hong
> > wrote:
> > > Link xpcs callback functions for MAC to configure the xpcs EEE
> > feature.
> > >
> > > The clk_eee frequency is used to calculate the
> > MULT_FACT_100NS. This
> > > is to adjust the clock tic closer to 100ns.
> > >
> > > Signed-off-by: Michael Sit Wei Hong
> > <michael.wei.hong.sit at intel.com>
> > 
> > What is the initial state of the EEE configuration before the first
> > call to stmmac_ethtool_op_set_eee()? Does it reflect the default
> > EEE settings?
> 
> The register values before the first call are the default reset values in
> the registers. The reset values assumes the clk_eee_i time period is 10ns,
> Hence, the reset value is set to 9.
> According to the register description,
> This value should be programmed such that the
> clk_eee_i_time_period * (MULT_FACT_100NS + 1) should be
> within 80 ns to 120 ns.
> 
> Since we are using a fixed 19.2MHz clk_eee, which is 52ns,
> we are setting the value to 1.

Does that hardware default configuration match what is returned by
ethtool --show-eee ?
 
-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!



More information about the linux-arm-kernel mailing list