[PATCH v3 1/2] dt-bindings: pwm: Add Xilinx AXI Timer

[Rob Herring]

On Tue, May 11, 2021 at 03:12:37PM -0400, Sean Anderson wrote:
> This adds a binding for the Xilinx LogiCORE IP AXI Timer. This device is
> a "soft" block, so it has many parameters which would not be
> configurable in most hardware. This binding is usually automatically
> generated by Xilinx's tools, so the names and values of some properties
> must be kept as they are. Replacement properties have been provided for
> new device trees.

Because you have some tool generating properties is not a reason we have 
to accept them upstream. 'deprecated' is for what *we* have deprecated.

In this case, I don't really see the point in defining new properties 
just to have bool.

> 
> Because we need to init timer devices so early in boot, the easiest way
> to configure things is to use a device tree property. For the moment
> this is 'xlnx,pwm', but this could be extended/renamed/etc. in the
> future if these is a need for a generic property.

No...

> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
> ---
> How should the clocking situation be documented? For the moment I have
> just left clock as optional, but should clock-frequency be documented?
> 
> Changes in v3:
> - Mark all boolean-as-int properties as deprecated
> - Add xlnx,pwm and xlnx,gen?-active-low properties.
> - Make newer replacement properties mutually-exclusive with what they
>   replace
> - Add an example with non-deprecated properties only.
> 
> Changes in v2:
> - Use 32-bit addresses for example binding
> 
>  .../bindings/pwm/xlnx,axi-timer.yaml          | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml b/Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml
> new file mode 100644
> index 000000000000..a5e90658e31a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/xlnx,axi-timer.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx LogiCORE IP AXI Timer Device Tree Binding
> +
> +maintainers:
> +  - Sean Anderson <sean.anderson at seco.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +        - const: xlnx,axi-timer-2.0
> +        - const: xlnx,xps-timer-1.00.a
> +      - const: xlnx,xps-timer-1.00.a
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    const: s_axi_aclk
> +
> +  reg:
> +    maxItems: 1
> +
> +  xlnx,count-width:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 8
> +    maximum: 32
> +    description:
> +      The width of the counter(s), in bits.
> +
> +  xlnx,gen0-assert:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1 ]
> +    default: 1
> +    deprecated: true
> +    description:
> +      The polarity of the generateout0 signal. 0 for active-low, 1 for active-high.
> +
> +  xlnx,gen0-active-low:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      The generate0 signal is active-low.
> +
> +  xlnx,gen1-assert:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1 ]
> +    default: 1
> +    deprecated: true
> +    description:
> +      The polarity of the generateout1 signal. 0 for active-low, 1 for active-high.
> +
> +  xlnx,gen1-active-low:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      The generate1 signal is active-low.
> +
> +  xlnx,one-timer-only:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1 ]
> +    deprecated: true
> +    description:
> +      Whether only one timer is present in this block.
> +
> +  xlnx,single-timer:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Only one timer is present in this block.
> +
> +  xlnx,pwm:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      This timer should be configured as a PWM.

If a PWM, perhaps you want a '#pwm-cells' property which can serve as 
the hint to configure as a PWM.

> +
> +required:
> +  - compatible
> +  - reg
> +  - xlnx,count-width
> +
> +allOf:
> +  - if:
> +      required:
> +        - clocks
> +    then:
> +      required:
> +        - clock-names
> +
> +  - if:
> +      required:
> +        - xlnx,gen0-active-low
> +    then:
> +      not:
> +        required:
> +          - xlnx,gen0-assert
> +
> +  - if:
> +      required:
> +        - xlnx,gen0-active-low
> +    then:
> +      not:
> +        required:
> +          - xlnx,gen0-assert
> +
> +  - if:
> +      required:
> +        - xlnx,one-timer-only
> +    then:
> +      not:
> +        required:
> +          - xlnx,single-timer
> +
> +additionalProperties: true
> +
> +examples:
> +  - |
> +    axi_timer_0: timer at 800e0000 {
> +        clock-names = "s_axi_aclk";
> +        clocks = <&zynqmp_clk 71>;
> +        compatible = "xlnx,axi-timer-2.0", "xlnx,xps-timer-1.00.a";
> +        reg = <0x800e0000 0x10000>;
> +        xlnx,count-width = <0x20>;
> +        xlnx,gen0-assert = <0x1>;
> +        xlnx,gen1-assert = <0x1>;
> +        xlnx,one-timer-only = <0x0>;
> +        xlnx,trig0-assert = <0x1>;
> +        xlnx,trig1-assert = <0x1>;
> +    };
> +
> +  - |
> +    axi_timer_0: timer at 800e0000 {
> +        clock-names = "s_axi_aclk";
> +        clocks = <&zynqmp_clk 71>;
> +        compatible = "xlnx,axi-timer-2.0", "xlnx,xps-timer-1.00.a";
> +        reg = <0x800e0000 0x10000>;
> +        xlnx,count-width = <0x20>;
> +        xlnx,gen0-active-low;
> +        xlnx,single-timer;
> +    };
> -- 
> 2.25.1
>