[PATCH v4 1/2] i2c: add binding to mark a bus as supporting SMBus-Alert

[Rob Herring]

On Wed, May 05, 2021 at 03:14:38PM +0200, Alain Volmat wrote:
> Since SMBus-Alert is an optional feature of SMBUS which
> requires an additional pin, the smbus binding cannot be
> used to indicate its support.
> 
> Add an additional smbus-alert binding specific for it and
> update the description text of smbus to avoid mentioning
> SMBus-Alert
> 
> Signed-off-by: Alain Volmat <alain.volmat at foss.st.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c.txt | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)

This needs to be added to i2c-bus.yaml too.

Acked-by: Rob Herring <robh at kernel.org>

> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
> index df41f72afc87..b864916e087f 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c.txt
> @@ -89,8 +89,11 @@ wants to support one of the below features, it should adapt these bindings.
>  
>  - smbus
>  	states that additional SMBus restrictions and features apply to this bus.
> -	Examples of features are SMBusHostNotify and SMBusAlert. Examples of
> -	restrictions are more reserved addresses and timeout definitions.
> +	An example of feature is SMBusHostNotify. Examples of restrictions are
> +	more reserved addresses and timeout definitions.
> +
> +- smbus-alert
> +	states that the optional SMBus-Alert feature apply to this bus.
>  
>  Required properties (per child device)
>  --------------------------------------
> -- 
> 2.7.4
>